Crash on DL385 G1 (2x Opteron 1.8, 4GB, HP6i RAID)



  • We'd been experiencing some issues running on desktops, so we thought an inexpensive rack server might be an idea, esp one that we can reboot remotely, and grab screengrabs when its "crashed"

    Hopefully the screengrab (oh the joys of HP iLo cards) will aid diagnostics, or at least point enable somebody to point me in the right direction.

    It is running 2010-02-21, which was installed today. It has LAN, WAN and OPT interfaces as VLANs on one NIC

    I'll quite happily send a copy of the config as required, but I;d rather not post it on an open forum.

    Cheers



  • Banned

    Single or dual CPU config??



  • I'm having crashs since update from Feb 20 on. Same with 21 Feb snap. Its crashing nearly 5 times a day. I'm thinking in downgrade to a date before 20 Feb. screen looks same






  • need the full 'bt' output from the prompt.



  • @Supermule:

    Single or dual CPU config??

    2x 1.8 single core, with the SMP option on install



  • @cmb:

    need the full 'bt' output from the prompt.

    I'll try and get it to go again, and see if the keyboard (via iLo) will respond



  • Here is the full bt from the last crash. Hardware is a Dell 1740 (Dual-Xeon, 2GB, Geom-mirror, 2x Broadcom-Net)

    Fatal trap 12: page fault while in kernel mode
    cpuid = 0; apic id = 00
    fault virtual address  = 0xc
    fault code              = supervisor read, page not present
    instruction pointer    = 0x20:0xc09ee8c8
    stack pointer          = 0x28:0xc5788700
    frame pointer          = 0x28:0xc578871c
    code segment            = base 0x0, limit 0xfffff, type 0x1b
                            = DPL 0, pres 1, def32 1, gran 1
    processor eflags        = interrupt enabled, resume, IOPL = 0
    current process        = 12 (irq16: bge0)



  • Igor you have ng_car active?



  • nop.

    cat mpd_wan.conf
    startup:
    pppoeclient:
    new -i pppoe0 pppoeclient pppoeclient
    set iface route default
    set iface disable on-demand
    set iface idle 0
    set iface enable tcpmssfix
    set iface up-script /usr/local/sbin/ppp-linkup
    set bundle disable multilink
    set auth authname "xxx"
    set auth password "yyy"
    set bundle no noretry
    set link keep-alive 10 60
    set link max-redial 7
    set link no acfcomp protocomp
    set link disable pap chap
    set link accept chap
    set link mtu 1492
    set ipcp yes vjcomp
    set ipcp ranges 0.0.0.0/0 0.0.0.0/0
    set ipcp enable req-pri-dns
    set ipcp enable req-sec-dns
    open
    cat mpd_wan.links
    pppoeclient:
    set link type pppoe
    set pppoe iface bge0
    set pppoe service ""
    set pppoe enable originate
    set pppoe disable incoming



  • @thermionic:

    @cmb:

    need the full 'bt' output from the prompt.

    I'll try and get it to go again, and see if the keyboard (via iLo) will respond

    it hasn't repeated, but I'm opening another thread with a different issue :-(



  • One interesting thing i found out: If i start a bittorrent-download my pfSense-box crashes constantly. Max uptime then was round about 15mins. Maybe this helps anyone.

    Edit:

    Fiddling a bit around i found that only downloading works, no crash. Only uploading seems to be ok too. But when a torrent is down- AND uploading it crashes really quick.

    In the meantime with torrent disabled the box crashes maybe 1 or 2 times a day.
    At the moment I'm collecting the backtraces from some of this crashes, only if anyone is interested.



  • @thermionic:

    @thermionic:

    @cmb:

    need the full 'bt' output from the prompt.

    I'll try and get it to go again, and see if the keyboard (via iLo) will respond

    it hasn't repeated, but I'm opening another thread with a different issue :-(

    It just repeated :-(

    was upgrading via the web interface from Sundays snapshot to Mondays snapshot




  • screenshots of bt output as attached






  • Crashes seemed to be gone with some update but came again with last snapshot built on Tue Mar 9 08:46:18.

    [pfSense Crash.txt](/public/imported_attachments/1/pfSense Crash.txt)


Log in to reply