Crash on DL385 G1 (2x Opteron 1.8, 4GB, HP6i RAID)

[_igor_]

I'm having crashs since update from Feb 20 on. Same with 21 Feb snap. Its crashing nearly 5 times a day. I'm thinking in downgrade to a date before 20 Feb. screen looks same

[cmb]

need the full 'bt' output from the prompt.

[thermionic]

@Supermule:

Single or dual CPU config??

2x 1.8 single core, with the SMP option on install

[thermionic]

@cmb:

need the full 'bt' output from the prompt.

I'll try and get it to go again, and see if the keyboard (via iLo) will respond

[_igor_]

Here is the full bt from the last crash. Hardware is a Dell 1740 (Dual-Xeon, 2GB, Geom-mirror, 2x Broadcom-Net)

Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address  = 0xc
fault code              = supervisor read, page not present
instruction pointer    = 0x20:0xc09ee8c8
stack pointer          = 0x28:0xc5788700
frame pointer          = 0x28:0xc578871c
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process        = 12 (irq16: bge0)

[eri--]

Igor you have ng_car active?

[_igor_]

nop.

cat mpd_wan.conf
startup:
pppoeclient:
new -i pppoe0 pppoeclient pppoeclient
set iface route default
set iface disable on-demand
set iface idle 0
set iface enable tcpmssfix
set iface up-script /usr/local/sbin/ppp-linkup
set bundle disable multilink
set auth authname "xxx"
set auth password "yyy"
set bundle no noretry
set link keep-alive 10 60
set link max-redial 7
set link no acfcomp protocomp
set link disable pap chap
set link accept chap
set link mtu 1492
set ipcp yes vjcomp
set ipcp ranges 0.0.0.0/0 0.0.0.0/0
set ipcp enable req-pri-dns
set ipcp enable req-sec-dns
open
cat mpd_wan.links
pppoeclient:
set link type pppoe
set pppoe iface bge0
set pppoe service ""
set pppoe enable originate
set pppoe disable incoming

[thermionic]

@thermionic:

@cmb:

need the full 'bt' output from the prompt.

I'll try and get it to go again, and see if the keyboard (via iLo) will respond

it hasn't repeated, but I'm opening another thread with a different issue :-(

[_igor_]

One interesting thing i found out: If i start a bittorrent-download my pfSense-box crashes constantly. Max uptime then was round about 15mins. Maybe this helps anyone.

Edit:

Fiddling a bit around i found that only downloading works, no crash. Only uploading seems to be ok too. But when a torrent is down- AND uploading it crashes really quick.

In the meantime with torrent disabled the box crashes maybe 1 or 2 times a day.
At the moment I'm collecting the backtraces from some of this crashes, only if anyone is interested.

[thermionic]

@thermionic:

@thermionic:

@cmb:

need the full 'bt' output from the prompt.

I'll try and get it to go again, and see if the keyboard (via iLo) will respond

it hasn't repeated, but I'm opening another thread with a different issue :-(

It just repeated :-(

was upgrading via the web interface from Sundays snapshot to Mondays snapshot

[thermionic]

screenshots of bt output as attached

[_igor_]

Crashes seemed to be gone with some update but came again with last snapshot built on Tue Mar 9 08:46:18.

[pfSense Crash.txt](/public/imported_attachments/1/pfSense Crash.txt)