Switch lan card-will settings remain as is



  • Hi All,

    I just got an 1.2.3 pfSense setup and running. Now I have decided to swap the current 10/100 nic to an gigE on the lan card. If I take the current lan card out in the web-gui,,,shut down the box, install the new gigE card I assume I will have to go through all of the port forwards routes etc? I did search this subject and could not find a definate answer?

    Thanks,
    Barry



  • You should simply have to re-assign the interface once you switch it over.



  • When the interface mismatch screen comes up at boot, just make sure you assign as many interfaces as you had previously assigned and none of your rules will disappear.


Log in to reply