Route Trafic to 2nd remote Subnet Through IPSEC!!! S.O.S

  • Hello everyone.
    I've searched all over the internet but i couldn't find anything about my problem.
    I have 2 remote sites connected via VPN IpSec. Everything works ok.
    But…... on the second site except the LAN Subnet ( i have a second subnet ( where i have an Asterisk Server.
    From my local network those 2 subnets can communicate with each other, but i can't make the remote site with subnet ( to communicate with the second remote site's OPT1 Subnet ( through the VPN Connection.
    I added on the 1st remote site's PfSense a static route :

    Interface : LAN
    Destination :
    Gateway :

    but it's like PfSense is ignoring this route.

    Am i doing something wrong?

    Thanks in advance.

  • Rebel Alliance Developer Netgate

    IPsec does not obey routing in that way.

    You will need to setup a second identical IPsec tunnel between the endpoints for the second subnet.

  • It worked. I made the second IPsec Tunnel added some rules and works grate!

    Thank a lot.

Log in to reply