Intel(R) Quad port x4 PCIe copper GbE NIC did not detected



  • hi all,
    need your advise, i just installed pfsense 1.2.3 release. And my quad port nic card Intel(R) Quad port x4 PCIe copper GbE NIC did not detected. I have added igb in global.inc and interfaces but still not working .
    Please advise.
    thanks



  • Can you post a dmesg and an ifconfig?



  • here is the dmesg :

    Copyright © 1992-2009 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights reserved.
    FreeBSD is a registered trademark of The FreeBSD Foundation.
    FreeBSD 7.2-RELEASE-p5 #0: Sun Dec  6 23:20:31 EST 2009
        sullrich@FreeBSD_7.2_pfSense_1.2.3_snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.7
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: Intel(R) Xeon(R) CPU          X5460  @ 3.16GHz (3166.69-MHz 686-class CPU)
      Origin = "GenuineIntel"  Id = 0x1067a  Stepping = 10
      Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x40ce3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,xsave>AMD Features=0x20100000 <nx,lm>AMD Features2=0x1 <lahf>Cores per package: 4
    real memory  = 3484024832 (3322 MB)
    avail memory = 3404603392 (3246 MB)
    ACPI APIC Table: <dell  pe_sc3 ="">FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
    cpu0 (BSP): APIC ID:  0
    cpu1 (AP): APIC ID:  1
    cpu2 (AP): APIC ID:  2
    cpu3 (AP): APIC ID:  3
    ioapic0: Changing APIC ID to 4
    ioapic0 <version 2.0="">irqs 0-23 on motherboard
    wlan: mac acl policy registered
    kbd1 at kbdmux0
    cryptosoft0: <software crypto="">on motherboard
    padlock0: No ACE support.
    acpi0: <dell pe_sc3="">on motherboard
    acpi0: [ITHREAD]
    acpi0: Power Button (fixed)
    Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
    acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
    Timecounter "HPET" frequency 14318180 Hz quality 900
    pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
    pci0: <acpi pci="" bus="">on pcib0
    pcib1: <pci-pci bridge="">at device 2.0 on pci0
    pci3: <pci bus="">on pcib1
    pcib2: <pci-pci bridge="">at device 3.0 on pci0
    pci4: <pci bus="">on pcib2
    pcib3: <acpi pci-pci="" bridge="">at device 4.0 on pci0
    pci5: <acpi pci="" bus="">on pcib3
    mpt0: <lsilogic sas="" sata="" adapter="">port 0xec00-0xecff mem 0xdfaec000-0xdfaeffff,0xdfaf0000-0xdfafffff irq 16 at device 0.0 on pci5
    mpt0: [ITHREAD]
    mpt0: MPI Version=1.5.18.0
    mpt0: mpt_wait_req(6) timed out
    mpt0: port 0 enable timed out
    mpt0: failed to enable port 0
    mpt0: unable to initialize IOC
    pcib4: <pci-pci bridge="">at device 5.0 on pci0
    pci6: <pci bus="">on pcib4
    pcib5: <acpi pci-pci="" bridge="">at device 6.0 on pci0
    pci7: <acpi pci="" bus="">on pcib5
    pcib6: <pci-pci bridge="">at device 0.0 on pci7
    pci8: <pci bus="">on pcib6
    pcib7: <pci-pci bridge="">at device 2.0 on pci8
    pci9: <pci bus="">on pcib7
    pci9: <network, ethernet="">at device 0.0 (no driver attached)
    pci9: <network, ethernet="">at device 0.1 (no driver attached)
    pcib8: <pci-pci bridge="">at device 4.0 on pci8
    pci10: <pci bus="">on pcib8
    pci10: <network, ethernet="">at device 0.0 (no driver attached)
    pci10: <network, ethernet="">at device 0.1 (no driver attached)
    pcib9: <acpi pci-pci="" bridge="">at device 7.0 on pci0
    pci11: <acpi pci="" bus="">on pcib9
    pcib10: <pci-pci bridge="">irq 16 at device 28.0 on pci0
    pci12: <pci bus="">on pcib10
    pcib11: <acpi pci-pci="" bridge="">irq 16 at device 28.4 on pci0
    pci1: <acpi pci="" bus="">on pcib11
    pci0:1:0:0: failed to read VPD data.
    bge0: <broadcom bcm5722="" a0,="" asic="" rev.="" 0xa200="">mem 0xdfbf0000-0xdfbfffff irq 16 at device 0.0 on pci1
    miibus0: <mii bus="">on bge0
    brgphy0: <bcm5722 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus0
    brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
    bge0: Ethernet address: a4:ba:db:2f:76:a0
    bge0: [ITHREAD]
    pcib12: <acpi pci-pci="" bridge="">irq 17 at device 28.5 on pci0
    pci2: <acpi pci="" bus="">on pcib12
    pci0:2:0:0: failed to read VPD data.
    bge1: <broadcom bcm5722="" a0,="" asic="" rev.="" 0xa200="">mem 0xdfcf0000-0xdfcfffff irq 17 at device 0.0 on pci2
    miibus1: <mii bus="">on bge1
    brgphy1: <bcm5722 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus1
    brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
    bge1: Ethernet address: a4:ba:db:2f:76:a1
    bge1: [ITHREAD]
    uhci0: <uhci (generic)="" usb="" controller="">port 0xac80-0xac9f irq 21 at device 29.0 on pci0
    uhci0: [GIANT-LOCKED]
    uhci0: [ITHREAD]
    usb0: <uhci (generic)="" usb="" controller="">on uhci0
    usb0: USB revision 1.0
    uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usb0
    uhub0: 2 ports with 2 removable, self powered
    uhci1: <uhci (generic)="" usb="" controller="">port 0xaca0-0xacbf irq 20 at device 29.1 on pci0
    uhci1: [GIANT-LOCKED]
    uhci1: [ITHREAD]
    usb1: <uhci (generic)="" usb="" controller="">on uhci1
    usb1: USB revision 1.0
    uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usb1
    uhub1: 2 ports with 2 removable, self powered
    uhci2: <uhci (generic)="" usb="" controller="">port 0xacc0-0xacdf irq 21 at device 29.2 on pci0
    uhci2: [GIANT-LOCKED]
    uhci2: [ITHREAD]
    usb2: <uhci (generic)="" usb="" controller="">on uhci2
    usb2: USB revision 1.0
    uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usb2
    uhub2: 2 ports with 2 removable, self powered
    ehci0: <ehci (generic)="" usb="" 2.0="" controller="">mem 0xdf8ffc00-0xdf8fffff irq 21 at device 29.7 on pci0
    ehci0: [GIANT-LOCKED]
    ehci0: [ITHREAD]
    usb3: EHCI version 1.0
    usb3: companion controllers, 2 ports each: usb0 usb1 usb2
    usb3: <ehci (generic)="" usb="" 2.0="" controller="">on ehci0
    usb3: USB revision 2.0
    uhub3: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usb3
    uhub3: 6 ports with 6 removable, self powered
    uhub4: <vendor 2="" 9="" 0x413c="" product="" 0xa001,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on uhub3
    uhub4: multiple transaction translators
    uhub4: 2 ports with 2 removable, self powered
    ukbd0: <dell 0="" 3="" drac5,="" class="" 0,="" rev="" 1.10="" 0.00,="" addr="">on uhub4
    kbd2 at ukbd0
    ums0: <dell 0="" 3="" drac5,="" class="" 0,="" rev="" 1.10="" 0.00,="" addr="">on uhub4
    ums0: X report 0x0002 not supported
    device_attach: ums0 attach returned 6
    uhub5: <vendor 4="" 9="" 0x04b4="" product="" 0x6560,="" class="" 0,="" rev="" 2.00="" 90.15,="" addr="">on uhub3
    uhub5: single transaction translator
    uhub5: 2 ports with 2 removable, self powered
    pcib13: <acpi pci-pci="" bridge="">at device 30.0 on pci0
    pci13: <acpi pci="" bus="">on pcib13
    vgapci0: <vga-compatible display="">port 0xbc00-0xbcff mem 0xd0000000-0xd7ffffff,0xdfdf0000-0xdfdfffff irq 19 at device 7.0 on pci13
    isab0: <pci-isa bridge="">at device 31.0 on pci0
    isa0: <isa bus="">on isab0
    atapci0: <intel ich9="" sata300="" controller="">port 0xac20-0xac27,0xac10-0xac13,0xac28-0xac2f,0xac14-0xac17,0xac40-0xac4f,0xac50-0xac5f irq 23 at device 31.2 on pci0
    atapci0: [ITHREAD]
    ata2: <ata 0="" channel="">on atapci0
    ata2: [ITHREAD]
    ata3: <ata 1="" channel="">on atapci0
    ata3: [ITHREAD]
    atapci1: <intel ich9="" sata300="" controller="">port 0xac30-0xac37,0xac18-0xac1b,0xac38-0xac3f,0xac1c-0xac1f,0xac60-0xac6f,0xac70-0xac7f irq 22 at device 31.5 on pci0
    atapci1: [ITHREAD]
    ata4: <ata 0="" channel="">on atapci1
    ata4: [ITHREAD]
    ata5: <ata 1="" channel="">on atapci1
    ata5: [ITHREAD]
    fdc0: <floppy drive="" controller="">port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
    fdc0: does not respond
    device_attach: fdc0 attach returned 6
    sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
    sio0: type 16550A
    sio0: [FILTER]
    sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
    sio1: type 16550A
    sio1: [FILTER]
    cpu0: <acpi cpu="">on acpi0
    est0: <enhanced speedstep="" frequency="" control="">on cpu0
    est: CPU supports Enhanced Speedstep, but is not recognized.
    est: cpu_vendor GenuineIntel, msr 4921492106004921
    device_attach: est0 attach returned 6
    p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
    cpu1: <acpi cpu="">on acpi0
    est1: <enhanced speedstep="" frequency="" control="">on cpu1
    est: CPU supports Enhanced Speedstep, but is not recognized.
    est: cpu_vendor GenuineIntel, msr 4921492106004921
    device_attach: est1 attach returned 6
    p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
    cpu2: <acpi cpu="">on acpi0
    est2: <enhanced speedstep="" frequency="" control="">on cpu2
    est: CPU supports Enhanced Speedstep, but is not recognized.
    est: cpu_vendor GenuineIntel, msr 4921492106004921
    device_attach: est2 attach returned 6
    p4tcc2: <cpu frequency="" thermal="" control="">on cpu2
    cpu3: <acpi cpu="">on acpi0
    est3: <enhanced speedstep="" frequency="" control="">on cpu3
    est: CPU supports Enhanced Speedstep, but is not recognized.
    est: cpu_vendor GenuineIntel, msr 4921492106004921
    device_attach: est3 attach returned 6
    p4tcc3: <cpu frequency="" thermal="" control="">on cpu3
    fdc0: <floppy drive="" controller="">port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
    fdc0: does not respond
    device_attach: fdc0 attach returned 6
    pmtimer0 on isa0
    orm0: <isa option="" roms="">at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xec000-0xeffff pnpid ORM0000 on isa0
    ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
    ata0: [ITHREAD]
    ata1 at port 0x170-0x177,0x376 irq 15 on isa0
    ata1: [ITHREAD]
    atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
    atkbd0: <at keyboard="">irq 1 on atkbdc0
    kbd0 at atkbd0
    atkbd0: [GIANT-LOCKED]
    atkbd0: [ITHREAD]
    sc0: <system console="">at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    uhub6: <vendor 2="" 9="" 0x0557="" product="" 0x8021,="" class="" 0,="" rev="" 1.10="" 1.00,="" addr="">on uhub1
    uhub6: 4 ports with 4 removable, self powered
    ukbd1: <aten 0="" 3="" international="" co.="" ltd="" cs1708a="" v1.3.126,="" class="" 0,="" rev="" 1.10="" 1.00,="" addr="">on uhub6
    kbd3 at ukbd1
    uhid0: <aten 0="" 3="" international="" co.="" ltd="" cs1708a="" v1.3.126,="" class="" 0,="" rev="" 1.10="" 1.00,="" addr="">on uhub6
    ums0: <aten 0="" 3="" international="" co.="" ltd="" cs1708a="" v1.3.126,="" class="" 0,="" rev="" 1.10="" 1.00,="" addr="">on uhub6
    ums0: 5 buttons and Z dir.
    ums1: <aten 0="" 3="" international="" co.="" ltd="" cs1708a="" v1.3.126,="" class="" 0,="" rev="" 1.10="" 1.00,="" addr="">on uhub6
    ums1: X report 0x0002 not supported
    device_attach: ums1 attach returned 6
    Timecounters tick every 1.000 msec
    IPsec: Initialized Security Association Processing.
    acd0: DVDROM <teac dvd-rom="" dv-28sw="" r.2a="">at ata2-slave SATA150
    da0 at mpt0 bus 0 target 0 lunSMP: AP CPU #1 Launched!
    SMP: AP CPU #3 Launched!
    SMP: AP CPU #2 Launched!
    0
    da0: <dell 1028="" virtual="" disk="">Fixed Direct Access SCSI-5 device
    da0: 300.000MB/s transfers
    da0: Command Queueing Enabled
    da0: 139392MB (285474816 512 byte sectors: 255H 63S/T 17769C)
    Trying to mount root from ufs:/dev/da0s1a
    pflog0: promiscuous mode enabled
    bge1: link state changed to DOWN
    bge1: link state changed to UP

    and this is the ifconfig

    bge0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
            options=9b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum>ether a4:ba:db:2f:76:a0
            inet6 fe80::a6ba:dbff:fe2f:76a0%bge0 prefixlen 64 scopeid 0x1
            inet 192.168.1.203 netmask 0xffffff00 broadcast 192.168.1.255
            media: Ethernet autoselect (1000baseTX <full-duplex>)
            status: active
    bge1: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
            options=9b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum>ether a4:ba:db:2f:76:a1
            inet6 fe80::a6ba:dbff:fe2f:76a1%bge1 prefixlen 64 scopeid 0x2
            inet  netmask 0xfffffff8 broadcast
            media: Ethernet autoselect (10baseT/UTP <full-duplex>)
            status: active
    lo0: flags=8049 <up,loopback,running,multicast>metric 0 mtu 16384
            inet6 ::1 prefixlen 128
            inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
            inet 127.0.0.1 netmask 0xff000000
    enc0: flags=0<> metric 0 mtu 1536
    pfsync0: flags=41 <up,running>metric 0 mtu 1460
            pfsync: syncdev: lo0 syncpeer: 224.0.0.240 maxupd: 128
    pflog0: flags=100 <promisc>metric 0 mtu 33204</promisc></up,running></up,loopback,running,multicast></full-duplex></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum></up,broadcast,running,simplex,multicast></full-duplex></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum></up,broadcast,running,simplex,multicast></dell></teac></aten></aten></aten></aten></vendor></generic></system></at></keyboard></isa></floppy></cpu></enhanced></acpi></cpu></enhanced></acpi></cpu></enhanced></acpi></cpu></enhanced></acpi></floppy></ata></ata></intel></ata></ata></intel></isa></pci-isa></vga-compatible></acpi></acpi></vendor></dell></dell></vendor></intel></ehci></ehci></intel></uhci></uhci></intel></uhci></uhci></intel></uhci></uhci></bcm5722></mii></broadcom></acpi></acpi></bcm5722></mii></broadcom></acpi></acpi></pci></pci-pci></acpi></acpi></network,></network,></pci></pci-pci></network,></network,></pci></pci-pci></pci></pci-pci></acpi></acpi></pci></pci-pci></lsilogic></acpi></acpi></pci></pci-pci></pci></pci-pci></acpi></acpi></high></dell></software></version></dell ></lahf></nx,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,xsave></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>



  • These lines

    pci9: <network, ethernet="">at device 0.0 (no driver attached)
    pci9: <network, ethernet="">at device 0.1 (no driver attached)
    pcib8: <pci-pci bridge="">at device 4.0 on pci8
    pci10: <pci bus="">on pcib8
    pci10: <network, ethernet="">at device 0.0 (no driver attached)
    pci10: <network, ethernet="">at device 0.1 (no driver attached)</network,></network,></pci></pci-pci></network,></network,>

    in the dmesg output suggest there is no driver in the system that recognises the NICs on the 4 port card.

    I suggest you try a recent snapshot build of pfSense 2.0 BETA  which includes much more up to date device drivers. pfSense 2.0 BETA is not yet considered "production ready" but there seem to be a number of people using it seriously.



  • You can also look into following this method: http://forum.pfsense.org/index.php/topic,26592.msg140323.html#msg140323



  • I'd bet 10 to 1 the pciconf -l shows the card's chip ID as 0x10e88086 :s



  • i tried the method that CaseyBlackburn give and it works.
    thank you all .


Log in to reply