Config NAT

  • Hi,

    I'm running on snapshots 2.0-BETA4 (i386) built on Sun Nov 14 16:48:36 EST 2010 everything ok. Now i need some advice for config NAT

    My network like this.

    LAN –------------------------|-------Intranet                          |
    VLAN 1 -----------------------|

    Connect from LAN to internet and intranet is ok
    Connect from VLAN to internet is ok
    Intranet only allow connect from IP LAN

    I want make a Source NAT from VLAN1- to Intranet- base on IP LAN interface -

    1 - Create virtual IP, Real IP is LAN's IP
    2 - Create new gateway is virtual IP
    3 - Make a NAT outbound rule base on LAN interface ( or Virtual IP)
    4 - Make a VLAN firewall rule allow connect to Intranet address by Virtual gateway

    I also try some others Nat address or rule but still not success.

  • I do not know if this is possible…

    I guess since the IP you want to NAT to exist on your LAN interface that won't work...

Log in to reply