Using CP on OPT interface with wireless AP?

jeroen234 · Dec 17, 2006, 11:34 AM

Ok, I documented everything I did as I did it so that someone can hopefully tell me what I did wrong.

Ok then I then changed the name of the OPT1 interface to CP, changed it's IP to 192.168.11/24, enabled it and clicked on save.

Thanks for any help anyone can give me here.

i hope you meen 192.168.11.1/24

danbutter · Dec 17, 2006, 2:51 PM

yes, I did mean 192.168.11.1/24.

Good catch though.

danbutter · Dec 19, 2006, 3:49 PM

Just to update this, I was able to do the same thing on the OPT1 interface.
I changed the IP to a /16 rather than /24 and changed the firewall rule to ANY rather than just TCP and it works.

However the DHCP server for the OPT interface still takes over my LAN clients.
I have to turn off the DHCP server for the OPT interface to get the one on the LAN interface to work again.
Strange.

hoba…Did you get the config.xml that I sent to you?

hoba · Dec 19, 2006, 6:54 PM

Didn't get anything yet.

danbutter · Dec 19, 2006, 8:07 PM

well, I sent it out on the 16th so I either typed something wrong or maybe your email doesn't like hotmail?

Either way I am attaching it now.
I don't think there is anything private in there.

config.xml.txt

hoba · Dec 19, 2006, 9:46 PM

Ok, I'll test it with one of my systems soon.

danbutter · Dec 21, 2006, 3:19 PM

Ok thanks.
No hurry.
I won't be messing with the box till next year at this point anyway.

I do believe that I will do a fresh install of 1.0.1 though as there are things like the shaper wizard that are broken for me in the snapshot.
I also keep getting a very strange thing where some computers on my network will only get between 5 and 6MB to the internet while others get 20Mb….it isn't all the time....just strange.
So I think a fresh install is in order after the holidays.

greyman · Jan 18, 2007, 12:15 AM

Ok. Just installed 1.0.1 on a 4801-60. All is working fine. for me until I enable captive portal (CP). I basically have my network configured the same way. Here is what I have

sis0: LAN: 192.168.0.1/25
sis1: WAN: DHCP (Public IP Supplied by SBC DSL Modem)
sis2: OPT: 192.168.0.129/25 (Airport wireless Network with WDS)

sis0 is running a DHCP server for the LAN clients
sis2 is running a DHCP server for the users that are wireless

all this works before enabling CP. Once I enable CP the browser never gets redirected to the CP to allow me to authenticate.

any ideas?

hoba · Jan 18, 2007, 4:17 PM

@hoba:

…you need to use the interface IP of the captive portal enabled interface as DNS server for the redirect to work and to bring up the CP page....

greyman · Jan 18, 2007, 4:40 PM

After reading thru the thread before posting by post I had noticed that and have set it up accordingly. The DHCP server that assigns IP addresses on that interface assigns the interface as the primary DNS server.

Still NO go. ;-(