WLAN USB stick - Error - pfsense hangs
-
Hi,
I tried yesterday with to WLAN USB sticks:
Alfa AWUS036H with Realtek R8187L chipset.The problem ist, that the console shows me, if I try to run it as an AP "HOSTAP mode not supported".
But in Windows or openSUSE it works as AP. Is this a freebsd driver problem or is this a pfsense problem ?Further I used two other WLAN USB sticks with one time RT2560 chipset and one time with rt73 (Edimax EW-7318USg) chipset. Both are ralink chipsets.
Both run into the error in the picture I attached.
Interesting is, that the start as AP, they send beacons and I can find the with a WLAN client, but if I try to connect it runs into this error.
-
It is a limitation of the FreeBSD driver for Realtek WLAN chip(s?) that AP mode is not supported.
I have seen the integer divide panic in FreeBSD problem reports database. Its some months since I plugged a rum device into my pfSense test system but I don't think I ever saw the integer divide panic.
I suggest you search the FreeBSD problem report database where you may find a workaround: for example, configuring a specific channel rather than defaulting to "Auto".
-
It is a limitation of the FreeBSD driver for Realtek WLAN chip(s?) that AP mode is not supported.
Hehe, chip, chipsets, chips - sigular, plural - german <-> english. This happens, if words in german sounds similar to english words but have a different meaning ;-)
I have seen the integer divide panic in FreeBSD problem reports database. Its some months since I plugged a rum device into my pfSense test system but I don't think I ever saw the integer divide panic.
I suggest you search the FreeBSD problem report database where you may find a workaround: for example, configuring a specific channel rather than defaulting to "Auto".
Can you tell me a chipset or better a WLAN USB stick which is working for you with pfsense ?
-
Can you tell me a chipset or better a WLAN USB stick which is working for you with pfsense ?
I've had satisfactory performance from the Tenda W311U (under US$15 after conversion from local currency) acting as an AP. I haven't tried to stress test it. It is supported by the run driver which is new in pfSense 2.0.
The driver reports it has the Ralink RT3070 chipset. -
HI and thanks,
I foun another thread and a reply from you about my other problem
"HOSTAP mode not supported"http://forum.pfsense.org/index.php/topic,31000.0.html
I will give this a try next week. thx