Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Core dump errors on RC1

    Scheduled Pinned Locked Moved 2.0-RC Snapshot Feedback and Problems - RETIRED
    3 Posts 2 Posters 2.4k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • valnarV Offline
      valnar
      last edited by

      I have a Hacom 1U unit (1Ghz Intel Celeron, Intel NIC's) that was working great on a beta4 revision.  I updated it to RC1 and it croaked.  I removed the CF card, used physdiskwrite to put on a new RC1 image from today and the same thing happened.  Here are the outputs of two boots (log couldn't get it all).  Any ideas?

      nsesrc/src/sys/pfSense_wrap.8.i386 i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) M processor         1.00GHz (999.89-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Family = 6  Model = d  Stepping = 8
  Features=0xafe9fbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,tm,pbe>real memory  = 1055784960 (1006 MB)
avail memory = 1014583296 (967 MB)
ACPI APIC Table: <intelr awrdacpi="">ioapic0 <version 2.0="">irqs 0-23 on motherboard
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0701130, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07011d0, 0) error 1
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (wpi_fw, 0xc0873e80, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0701270, 0) error 1
cryptosoft0: <software crypto="">on motherboard
padlock0: No ACE support.
acpi0: <intelr awrdacpi="">on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3ede0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <acpi cpu="">on acpi0
acpi_button0: <power button="">on acpi0
acpi_button1: <sleep button="">on acpi0
pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus="">on pcib0
pci0: <base peripheral=""> at device 0.1 (no driver attached)
pci0: <base peripheral=""> at device 0.3 (no driver attached)
vgapci0: <vga-compatible display="">port 0xe900-0xe907 mem 0xe0000000-0xe7ffffff,0xe8200000-0xe827ffff irq 16 at device 2.0 on pci0
vgapci1: <vga-compatible display="">at device 2.1 on pci0
uhci0: <intel 82801db="" (ich4)="" usb="" controller="" usb-a="">port 0xeb00-0xeb1f irq 16 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <intel 82801db="" (ich4)="" usb="" controller="" usb-a="">on uhci0
uhci1: <intel 82801db="" (ich4)="" usb="" controller="" usb-b="">port 0xed00-0xed1f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <intel 82801db="" (ich4)="" usb="" controller="" usb-b="">on uhci1
uhci2: <intel 82801db="" (ich4)="" usb="" controller="" usb-c="">port 0xe800-0xe81f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <intel 82801db="" (ich4)="" usb="" controller="" usb-c="">on uhci2
ehci0: <intel 82801db="" l="" m="" (ich4)="" usb="" 2.0="" controller="">mem 0xe8280000-0xe82803ff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <intel 82801db="" l="" m="" (ich4)="" usb="" 2.0="" controller="">on ehci0
pcib1: <acpi pci-pci="" bridge="">at device 30.0 on pci0
pci1: <acpi pci="" bus="">on pcib1
em0: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.3="">port 0xd000-0xd03f mem 0xe8000000-0xe801ffff,0xe8020000-0xe803ffff irq 16 at device 0.0 on pci1
em0: [FILTER]
em1: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.3="">port 0xd100-0xd13f mem 0xe8040000-0xe805ffff,0xe8060000-0xe807ffff irq 17 at device 1.0 on pci1
em1: [FILTER]
em2: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.3="">port 0xd200-0xd23f mem 0xe8080000-0xe809ffff,0xe80a0000-0xe80bffff irq 18 at device 2.0 on pci1
em2: [FILTER]
em3: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.3="">port 0xd300-0xd33f mem 0xe80c0000-0xe80dffff,0xe80e0000-0xe80fffff irq 19 at device 3.0 on pci1
em3: [FILTER]
isab0: <pci-isa bridge="">at device 31.0 on pci0
isa0: <isa bus="">on isab0
atapci0: <intel ich4="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ata 0="" channel="">on atapci0
ata0: [ITHREAD]
ata1: <ata 1="" channel="">on atapci0
ata1: [ITHREAD]
pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
acpi_tz0: <thermal zone="">on acpi0
atrtc0: <at realtime="" clock="">port 0x70-0x73 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart0: console (9600,n,8,1)
ppc0: parallel port not found.
acpi_throttle0: <acpi cpu="" throttling="">on cpu0
Timecounter "TSC" frequency 999889604 Hz quality 800
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <intel>at usbus0
uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
ugen1.1: <intel>at usbus1
uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen2.1: <intel>at usbus2
uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
ugen3.1: <intel>at usbus3
uhub3: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus3
ad2: 3831MB <cf 20091113="" card="" 4gb="">at ata1-master PIO4 
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3 usbus2 usbus1
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3
Root mount waiting for: usbus3
uhub3: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ufs/pfsense1
Configuring crash dumps...
Mounting filesystems...
Setting up embedded specific environment...pid 32 (newfs), uid 0: exited on signal 11
mdmfs: mount exited witpid 38 (newfs), uid 0: exited on signal 11
h error code 1
mdmfs: mount exited with error code 1
 done.
pid 45 (ln), uid 0: exited on signal 11 (core dumped)
Segmentation fault (core dumped)
WARNING: R/W mount of /cf denied.  Filesystem is not clean - run fsck
mount: not currently mounted /cf
umount: /cf: not a file system root directory
pid 52 (fsck_ufs), uid 0: exited on signal 11 (core dumped)
fsck: /dev/ufs/cf: SegWARNING: R/W mount of /cf denied.  Filesystem is not clean - run fsck
mentation fault: 11
mount: /devpid 55 (cut), uid 0: exited on signal 11 (core dumped)
/ufs/cf : Operation not permittepid 61 (cut), uid 0: exited on signal 11 (core dumped)
d

     ___
 ___/ mode = 0100444, inum = 18192, fs = /
panic: ffs_valloc: dup alloc
cpuid = 0
Uptime: 9s
Cannot dump. Device not defined or unavailable.
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.</cf></intel></intel></intel></intel></intel></intel></intel></intel></acpi></at></thermal></serial></ata></ata></intel></isa></pci-isa></intel(r)></intel(r)></intel(r)></intel(r)></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></vga-compatible></vga-compatible></acpi></acpi></sleep></power></acpi></intelr></software></version></intelr></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,tm,pbe> 

      
uhci1: [ITHREAD]
usbus1: <intel 82801db="" (ich4)="" usb="" controller="" usb-b="">on uhci1
uhci2: <intel 82801db="" (ich4)="" usb="" controller="" usb-c="">port 0xe800-0xe81f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <intel 82801db="" (ich4)="" usb="" controller="" usb-c="">on uhci2
ehci0: <intel 82801db="" l="" m="" (ich4)="" usb="" 2.0="" controller="">mem 0xe8280000-0xe82803ff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <intel 82801db="" l="" m="" (ich4)="" usb="" 2.0="" controller="">on ehci0
pcib1: <acpi pci-pci="" bridge="">at device 30.0 on pci0
pci1: <acpi pci="" bus="">on pcib1
em0: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.3="">port 0xd000-0xd03f mem 0xe8000000-0xe801ffff,0xe8020000-0xe803ffff irq 16 at device 0.0 on pci1
em0: [FILTER]
em1: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.3="">port 0xd100-0xd13f mem 0xe8040000-0xe805ffff,0xe8060000-0xe807ffff irq 17 at device 1.0 on pci1
em1: [FILTER]
em2: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.3="">port 0xd200-0xd23f mem 0xe8080000-0xe809ffff,0xe80a0000-0xe80bffff irq 18 at device 2.0 on pci1
em2: [FILTER]
em3: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.3="">port 0xd300-0xd33f mem 0xe80c0000-0xe80dffff,0xe80e0000-0xe80fffff irq 19 at device 3.0 on pci1
em3: [FILTER]
isab0: <pci-isa bridge="">at device 31.0 on pci0
isa0: <isa bus="">on isab0
atapci0: <intel ich4="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ata 0="" channel="">on atapci0
ata0: [ITHREAD]
ata1: <ata 1="" channel="">on atapci0
ata1: [ITHREAD]
pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
acpi_tz0: <thermal zone="">on acpi0
atrtc0: <at realtime="" clock="">port 0x70-0x73 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart0: console (9600,n,8,1)
ppc0: parallel port not found.
acpi_throttle0: <acpi cpu="" throttling="">on cpu0
Timecounter "TSC" frequency 999889837 Hz quality 800
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <intel>at usbus0
uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
ugen1.1: <intel>at usbus1
uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen2.1: <intel>at usbus2
uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
ugen3.1: <intel>at usbus3
uhub3: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus3
ad2: 3831MB <cf 20091113="" card="" 4gb="">at ata1-master PIO4 
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3 usbus2 usbus1
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3
Root mount waiting for: usbus3
uhub3: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ufs/pfsense1
WARNING: / was not properly dismounted
Configuring crash dumps...
Mounting filesystems...
Setting up embedded specific environment... done.
WARNING: R/W mount of / denied.  Filesystem is not clean - run fsck
mount: /dev/ufs/pfsense1 : Operation not permitted
** /dev/ufs/pfsense1
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
INCORRECT BLOCK COUNT I=15 (592 should be 104)
CORRECT? yes

INCORRECT BLOCK COUNT I=16 (568 should be 0)
CORRECT? yes

** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
FREE BLK COUNT(S) WRONG IN SUPERBLK
SALVAGE? yes

SUMMARY INFORMATION BAD
SALVAGE? yes

BLK(S) MISSING IN BIT MAPS
SALVAGE? yes

5914 files, 279876 used, 1590138 free (626 frags, 198689 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****

***** FILE SYSTEM WAS MODIFIED *****
** /dev/ufs/cf
** Last Mounted on /cf
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
7 files, 38 used, 101017 free (25 frags, 12624 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****

     ___
 ___/ f \
/ p \___/ Sense
\___/   \
    \___/

Welcome to pfSense 2.0-RC1  ...

Creating symlinks...rm: /conf: No such file or directory
...done.
pid 237 (php), uid 0: exited on signal 11 (core dumped)

Fatal error: Call to undefined function xml_parser_create() in /etc/inc/xmlparse.inc on line 169
appending output to nohup.out
Launching the init system... done.
Initializing...............
Fatal error: Call to undefined function xml_parser_create() in /etc/inc/xmlparse.inc on line 169
Starting CRON... done.

Fatal error: Call to undefined function xml_parser_create() in /etc/inc/xmlparse.inc on line 169
Executing rc.d items... 
 Starting /usr/local/etc/rc.d/*.sh...done.
Bootup complete
grep: /var/log/dmesg.boot: No such file or directory
[: -gt: unexpected operator
rm: /tmp/config.cache: No such file or directory

Fatal error: Call to undefined function xml_parser_create() in /etc/inc/xmlparse.inc on line 169
pid 374 (getty), uid 0: exited on signal 11 (core dumped)
pid 375 (getty), uid 0: exited on signal 11 (core dumped)
pid 376 (getty), uid 0: exited on signal 11 (core dumped)
pid 377 (getty), uid 0: exited on signal 11 (core dumped)
Mar  2 15:59:41 init: getty repeating too quickly on port /dev/console, sleeping 30 secs
pid 378 (getty), uid 0: exited on signal 11 (core dumped)
pid 379 (getty), uid 0: exited on signal 11 (core dumped)
pid 380 (getty), uid 0: exited on signal 11 (core dumped)
pid 381 (getty), uid 0: exited on signal 11 (core dumped)
pid 382 (getty), uid 0: exited on signal 11 (core dumped)
Mar  2 16:00:12 init: getty repeating too quickly on port /dev/console, sleeping 30 secs
[/code]</cf></intel></intel></intel></intel></intel></intel></intel></intel></acpi></at></thermal></serial></ata></ata></intel></isa></pci-isa></intel(r)></intel(r)></intel(r)></intel(r)></acpi></acpi></intel></intel></intel></intel></intel>
      1 Reply Last reply Reply Quote 0
      • E Offline
        eri--
        last edited by

        That seems like your card is not working properly.
        Or you are upgrading only one slice!

        1 Reply Last reply Reply Quote 0
        • valnarV Offline
          valnar
          last edited by

          I did try the second slice after I failed to boot the first time.  I would not be surprised since I had a bad CF card from Hacom before and they sent me out the same kind.

          What lines give it away that it's the CF card?

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.