Inetd[273]: 19112/tcp: bind: Can't assign requested address

jeroen234

i don't see it here i have Reflection on
using beta1 iso
inetd.conf:
ftp-proxy stream tcp nowait root /usr/lib/libexec/ftp-proxy ftp-proxy -D0 -m 55000 -M 57000 -t 180 -u proxy

Hi everybody and a happy new year :)

I just started to use pfsense and I have fresh pfsense beta1 installation and I have exactly the same problem. This is my setup:

Dual PII 300 Mhz
128 Mb RAM
600 Mb hard drive (yes, I know it's small but enough for now)
3 NIC (WAN, LAN and OPT1)
pfSense 1.0-Beta 1

and that's all. Just a basic install without any extra configuration.

From m0nowall website I found documentation how to configure portforwarding for bittorrent. Documentation is here:

http://doc.m0n0.ch/handbook/thirdparty-bittorrent.html

and that's how I did it. Bittorrent works but that error message puzzles me. This is the exact error message:

inetd[6055]: 19001/tcp: bind: Can't assign requested address
inetd[6055]: 19000/tcp: bind: Can't assign requested address

I tried to change reflection to disabled but that didn't help and my /etc/inetd.conf is:

ftp-proxy stream tcp nowait root /usr/lib/libexec/ftp-proxy ftp-proxy -D0 -m 55000 -M 57000 -t 180 -u proxy

TIA

–
palo

sullrich

When you see this message, please run ps awux | grep inetd and see if inetd is already running. We may be trying to start it overtop the other running process. Checks are there to look for this, but bugs happen.

ps awux | grep inetd

root 6055 0.0 0.9 1436 1088 ?? INs 4:58PM 0:00.43 /usr/sbin/inetd -a 127.0.0.1 /var/etc/inetd.conf
root 13299 0.0 0.8 1456 952 p0 RL+ 11:29PM 0:00.01 grep inetd

Is that /var/etc/inetd.conf correct ? Should it be /etc/inetd.conf ?

ls -l /var/etc/inetd.conf

ls: /var/etc/inetd.conf: No such file or directory

ls -l /etc/inetd.conf

-rw-r–r-- 1 root wheel 108 Dec 26 05:18 /etc/inetd.conf

Btw, it happens every 10 minutes:

Jan 1 23:18:51 inetd[6055]: 19000/tcp: bind: Can't assign requested address
Jan 1 23:18:51 inetd[6055]: 19000/tcp: bind: Can't assign requested address
Jan 1 23:18:51 inetd[6055]: 19001/tcp: bind: Can't assign requested address
Jan 1 23:18:51 inetd[6055]: 19001/tcp: bind: Can't assign requested address
Jan 1 23:08:51 inetd[6055]: 19000/tcp: bind: Can't assign requested address
Jan 1 23:08:51 inetd[6055]: 19000/tcp: bind: Can't assign requested address
Jan 1 23:08:51 inetd[6055]: 19001/tcp: bind: Can't assign requested address
Jan 1 23:08:51 inetd[6055]: 19001/tcp: bind: Can't assign requested address
Jan 1 22:58:51 inetd[6055]: 19000/tcp: bind: Can't assign requested address
Jan 1 22:58:51 inetd[6055]: 19000/tcp: bind: Can't assign requested address
Jan 1 22:58:51 inetd[6055]: 19001/tcp: bind: Can't assign requested address
Jan 1 22:58:51 inetd[6055]: 19001/tcp: bind: Can't assign requested address

–
palo

sullrich

@palo:

ps awux | grep inetd

root 6055 0.0 0.9 1436 1088 ?? INs 4:58PM 0:00.43 /usr/sbin/inetd -a 127.0.0.1 /var/etc/inetd.conf
root 13299 0.0 0.8 1456 952 p0 RL+ 11:29PM 0:00.01 grep inetd

Is that /var/etc/inetd.conf correct ? Should it be /etc/inetd.conf ?

Nope.

ls -la /var/etc/inetd.conf

-rw-r–r-- 1 root wheel 17949 Dec 31 23:15 /var/etc/inetd.conf

@palo:

ls -l /var/etc/inetd.conf

ls: /var/etc/inetd.conf: No such file or directory

ls -l /etc/inetd.conf

-rw-r–r-- 1 root wheel 108 Dec 26 05:18 /etc/inetd.conf

Btw, it happens every 10 minutes:

Jan 1 23:18:51 inetd[6055]: 19000/tcp: bind: Can't assign requested address
Jan 1 23:18:51 inetd[6055]: 19000/tcp: bind: Can't assign requested address
Jan 1 23:18:51 inetd[6055]: 19001/tcp: bind: Can't assign requested address
Jan 1 23:18:51 inetd[6055]: 19001/tcp: bind: Can't assign requested address
Jan 1 23:08:51 inetd[6055]: 19000/tcp: bind: Can't assign requested address
Jan 1 23:08:51 inetd[6055]: 19000/tcp: bind: Can't assign requested address
Jan 1 23:08:51 inetd[6055]: 19001/tcp: bind: Can't assign requested address
Jan 1 23:08:51 inetd[6055]: 19001/tcp: bind: Can't assign requested address
Jan 1 22:58:51 inetd[6055]: 19000/tcp: bind: Can't assign requested address
Jan 1 22:58:51 inetd[6055]: 19000/tcp: bind: Can't assign requested address
Jan 1 22:58:51 inetd[6055]: 19001/tcp: bind: Can't assign requested address
Jan 1 22:58:51 inetd[6055]: 19001/tcp: bind: Can't assign requested address

–
palo

Every 10 minutes!? I don't see how this is possible. Do you not have any redirects in place?

jeroen234

in /var/etc there is no inetd.conf

ls -la /var/etc/

total 30
drwxr-xr-x 3 root wheel 512 Jan 2 03:44 .
drwxr-xr-x 12 root wheel 512 Dec 27 09:54 ..
-rw-r–r-- 1 root wheel 17 Jan 2 03:44 defaultdomain.conf
-rw-r--r-- 1 root wheel 55 Jan 1 15:44 dhclient_wan.conf
-rw-r--r-- 1 root wheel 321 Jan 1 15:44 dhcpd.conf
-rw-r--r-- 1 root wheel 103 Jan 1 15:44 hosts
-rw-r--r-- 1 root wheel 5115 Jan 1 15:44 lighty-webConfigurator.conf
drwxr-xr-x 2 root wheel 512 Dec 27 10:12 mpd-vpn
-rw-r--r-- 1 root wheel 43 Jan 2 03:44 nameserver_vr0
-rw-r--r-- 1 root wheel 43 Jan 2 03:44 nameservers.conf
-rw-r--r-- 1 root wheel 192 Jan 2 03:44 resolv.conf
-rw------- 1 root wheel 0 Jan 2 03:44 sasyncd.conf
-rw-r--r-- 1 root wheel 0 Jan 1 15:44 slbd.conf
-rw-rw-rw- 1 root wheel 850 Dec 29 23:08 snmpd.conf
-rw-r--r-- 1 root wheel 836 Jan 1 15:44 syslog.conf

Today I recreated that bittorrent portforwarding rule which I made yesterday and it seems that problem is gone. I don't have any idea what might cause that error message but everything seems to work ok right now. Well, I still don't have /var/etc/inetd.conf file but if everything works, I don't care.

–
palo

Dakhor

I got the same error on a fresh installation of 1beta. Disabling reflection didnt help - deleting all NAT and Firewall rules didnt help ( didnt reboot though ). Finally I made a new NAT port forward rule ( and the auto firewall at the same time ) AND rebooted the system. Problem went away…

The only thing that I did differently the first time was that after creating the port forward rule...

1 - I forgot that I needed UDP protocoll too so edited the NAT rule AND firewall rule to include that.
2 - Edited them again a second time to remove ip and ad an Alias instead.

How about the other guys who got this error message and then made it go away by making a fresh new rule. Maybe there is a bug with EDITING rules. I will try and mess with it some more tomorrow to see if I can get the error back. Need to hit the sack now though :)

/DaK/

sullrich

This is hopefully fixed in beta 2.

Dakhor

Now im getting something like this when running torrent software "inetd[348]: accept (for 19000): Software caused connection abort" but I suspect this is cuz I have forwarded one port only and torrents want a number of them to work well…

Anyway I wanted to ask what log readers you guys are using?

/DaK/

Snille

I also (still, after a clean install and setting up all the rules again) get the same error.
inetd[366]: accept (for 19000): Software caused connection abort

Are you sure this is due to only forwarding one port for torrent even when the torrent program says it only needs one?

sullrich

Click System -> Advanced -> Disable Reflection

Snille

Isn't the "reflection" the function in the firewall that let "me" (inside the lan) surf to my own dns name without having to actually go out and back in again (or to be in need of a host file, or an internal DNS)?

Anyway, is this a serious error? Or just an annoying thing filling up the log? :)

sullrich

Yes that is the function that allows you access it from internal. It looks like something is connecting and aborting the connect often.