How to assign certain WANs to certain LANs



  • Hi,

    I today built my first pfsense and I'm quiet satisfied with it.
    But there is somesthing I did not sort out so far by myself:
    I'm running the pfsense with 2 WAN connections and 2 LAN connections. My goal is to assign WAN1 to LAN1 and WAN2 to LAN2.
    How can I do this?
    WAN1 is a VDSL connection through a VDSL Router and WAN2 is a SDSL connection with static/public IP.
    I also already build 2 gateways - one for each WAN connection. Both are online and I also can configure failover through a gateway group.
    But how can I definde a specific WAN connection to be used by a LAN of my choice?
    Thanks in advance!



  • Just add two firewall rules on the LAN side pointing to the two LAN subnets and the corresponding gateways. Or is it something else you want to accomplish?



  • Hi, im having one similar problem, I Have 2 WAN and only one LAN, but some internal addresses i'd like to redirect to one specific WAN, for example:

    WAN1 –-  192.168.1.10, 192.168.1.11, 192.168.1.12

    WAN2 ---  192.168.1.13, 192.168.1.14, 192.168.1.15

    how can i do this on pfsense 2.0 ???



  • @lucassimionato:

    Hi, im having one similar problem, I Have 2 WAN and only one LAN, but some internal addresses i'd like to redirect to one specific WAN, for example:

    WAN1 –-  192.168.1.10, 192.168.1.11, 192.168.1.12

    WAN2 ---  192.168.1.13, 192.168.1.14, 192.168.1.15

    how can i do this on pfsense 2.0 ???

    create an alias, which contains half of your clients
    Create rule on lan, where you apply this alias as source and in advanced settings select another gateway


Locked