Watchguard XTM 5 Series
-
Greetings…
I have 2 XTM 505's I've converted to pfsense a while back, still running Celeron 440. One I use actively and the other is just a spare. With the upcoming AES NI requirements, I was looking to upgrade the CPU's in these (FW-7580) to the fastest CPU's that have AES NI capable. Has anyone done this? If so, can you please share with me what would be your recommendation? I've not found an AES NI CPU that I believe with will work on this motherboard.
TIA.
Kap
-
Greetings…
I have 2 XTM 505's I've converted to pfsense a while back, still running Celeron 440. One I use actively and the other is just a spare. With the upcoming AES NI requirements, I was looking to upgrade the CPU's in these (FW-7580) to the fastest CPU's that have AES NI capable. Has anyone done this? If so, can you please share with me what would be your recommendation? I've not found an AES NI CPU that I believe with will work on this motherboard.
TIA.
Kap
The XTM 5 series use a mainboard with Intel Socket S775 , in the S775 design there doesn't exist any CPU that supports AES-NI.
For these boxes to upgrade from the stock Celeron, i always use a Intel E5800 Dual Core @ 3.2Ghz ,
this type is in the same thermal range (65Watt) as the original cpu.
That way, the cpu runs at same temperature (sometimes even cooler) then the original cpu, and you still got a decent extra cpu power.
There are users that use a Intel Quad Core Q6600 cpu in these boxes, but i never done this,
because that cpu is a 105Watt type, so the box gets hotter and draws more power.Grtz
DeLorean -
Greetings…
I have 2 XTM 505's I've converted to pfsense a while back, still running Celeron 440. One I use actively and the other is just a spare. With the upcoming AES NI requirements, I was looking to upgrade the CPU's in these (FW-7580) to the fastest CPU's that have AES NI capable. Has anyone done this? If so, can you please share with me what would be your recommendation? I've not found an AES NI CPU that I believe with will work on this motherboard.
TIA.
Kap
The XTM 5 series use a mainboard with Intel Socket S775 , in the S775 design there doesn't exist any CPU that supports AES-NI.
For these boxes to upgrade from the stock Celeron, i always use a Intel E5800 Dual Core @ 3.2Ghz ,
this type is in the same thermal range (65Watt) as the original cpu.
That way, the cpu runs at same temperature (sometimes even cooler) then the original cpu, and you still got a decent extra cpu power.
There are users that use a Intel Quad Core Q6600 cpu in these boxes, but i never done this,
because that cpu is a 105Watt type, so the box gets hotter and draws more power.Grtz
DeLoreanYes - this is what I thought, but wanted some confirmation in case I overlooked something. So I guess the XTM 5 series is confined to 2.4 since the 2.5 will require AES NI. Guess I will need a new box when 2.5 arrives :)
Thanks for your quick response…
Kap
-
Well 2.4 will be supported for some time after that, like 2.3 is now. So there will be time to make the switch.
Steve
-
Well 2.4 will be supported for some time after that, like 2.3 is now. So there will be time to make the switch.
Steve
Yep - fully understand, my statement was not meant to be a complaint, just a confirmation that I will eventually need to get off this XTM 5 hardware. I like to run the latest greatest :) Keep up all the great work, AES-NI makes sense and I look forward to my next build when 2.5 arrives!
Thanks - Kap
-
Argh!
I finally got pfSense working on my XTM 535 with Dual Core E5300 / 4GB RAM. Took me forever to figure out how to unlock my own BIOS, get it booting from USB and installed via SSD. Had a ton of issues with the CF card. Now I read your post about AES-NI.
I am disappoint :-[
-
Think about how much you learned along the way though. ;)
You're still good for some time to come anyway as I said.
Steve
-
Argh!
I finally got pfSense working on my XTM 535 with Dual Core E5300 / 4GB RAM. Took me forever to figure out how to unlock my own BIOS, get it booting from USB and installed via SSD. Had a ton of issues with the CF card. Now I read your post about AES-NI.
I am disappoint :-[
[/quote]I wouldn't be disappointed. Still plenty of time left. In my case I am still just tweaking my first XTM box and I have a second backup box on the way. I also have a Q9505s CPU on the way. It will be weeks before it's all configured and operational.
For me going with XTM 5 was a calculated decision since I was aware of the upcoming AES-NI limitation. So I also investigated alternatives to pfSense in order to avoid retiring the hardware prematurely.
Changing the subject, is anyone with a handy SPI programmer willing to insert the two ASCII sequences (unit serial number & the second sequence) into a modified BIOS to confirm if the unit accepts such hybrid BIOS and recognized the serial number?
-
Not sure what you're asking there. You want to change the unit's serial number?
I don't think that is stored in the BIOS. Changing the serial also seems morally dubious at best! ??? Maybe I'm misunderstanding…
Steve
-
Hi Steve,
Several posts earlier I highlighted a few of the discoveries I made when tinkering with my XTM 5 box. One of those discoveries was that the original unit BIOS has the serial number stored in null terminated plain ASCII at offset 0x0000h in the BIOS. Likewise offset 0x0100h in the original BIOS has a null terminated ASCII string that corresponds to the barcode label on my unit that is placed immediately to the left of the power switch (the barcode correlation was highlighted to me by DeLorean). Both of those strings are wiped out when the BIOS is edited with the AMI tools. This is the reason why people with edited BIOS cannot get the original firmware to recognize the unit serial number…
All I was suggesting is that someone who cares about the original firmware can try to re-insert those strings manually into their edited / unlocked BIOS to see if it fixes the issue. I have no idea if these strings are used by the BIOS to calculate the checksum. I am myself not that adventurous because (1) I will never need to run the original WatchGuard firmware and (2) I don't have an SPI programmer in case the unit is "bricked".
Cheers.
Not sure what you're asking there. You want to change the unit's serial number?
I don't think that is stored in the BIOS. Changing the serial also seems morally dubious at best! ??? Maybe I'm misunderstanding…
Steve
-
Ah, sorry I've clearly not been paying attention. ::)
That's interesting from an academic point of view. Raises some questions.
However I must ask that any such discussion is taken off the public forum. Whilst you and I might have no need to use that for subversive reasons there will be others who try it, unfortunately.
Were you ever able to enable EIST (speedstep) successfully in your BIOS?
It's been so long since I tried it I forget exactly what success I had there. I do recall having to make several changes to set the MSR bit correctly after boot though.Thanks,
Steve -
Stephen what box have you switched to or are you still using an XTM?
-
Well you can probably imagine I have a whole host of boxes. Some might say too many! ::)
I still have the XTM5 and I use it for testing snapshots and packages etc all the time. Also useful as source or sink in throughput testing something else. I'm running an E8400 in it now. Runs solid.
I'd still love to get Speedstep working properly but finding the time to dig deep enough is difficult.I still run an X-Core-E box but it flakes out about once a week now. Just too many old components in it.
Steve
-
Has not even occurred to me since the two strings were just so obvious at the beginning of the file when viewed with a hex editor. Feel free to redact my posts.
I have not touched speedstep at all. It would require a lot of learning on my part first and I suffer from a very chronic lack of time. It would be awesome if someone got it to work correctly though.
Ah, sorry I've clearly not been paying attention. ::)
That's interesting from an academic point of view. Raises some questions.
However I must ask that any such discussion is taken off the public forum. Whilst you and I might have no need to use that for subversive reasons there will be others who try it, unfortunately.
Were you ever able to enable EIST (speedstep) successfully in your BIOS?
It's been so long since I tried it I forget exactly what success I had there. I do recall having to make several changes to set the MSR bit correctly after boot though.Thanks,
Steve -
I can now also report that the Q9505s CPU is working beautifully in my unit, but of course sans speedstep.
-
What's really annoying is that I did once have it sort of working. I had to override the DSDT table with one I had added P-state values to though.
Problem is it's so long ago now I can't remember exactly what I did. ::)
https://forum.pfsense.org/index.php?topic=43574.msg265760#msg265760
Steve
-
Greetings folks,
I am a long time tomato user preparing to move to pfsense. I recently picked up an XTM 525 via craigslist and added a SATA SSD. The installation went smoothly other than a minor hiccup with the characters not displaying properly on my terminal.
Unfortunately, the unit is a bit too noisy for my home despite using WGXepc64 for slowing down the fans. The noise appears to be originating from the CPU fan(s), which I understand are controlled by the bios. Unlike the bios in other systems, this unit 's bios is dated 4/26/2010.
I'd appreciate suggestions on how to get the bios unlocked/CPU fans silenced.
Thank You -
Your options are limited unfortunately, unless you have coding skills and time. ;)
The system fan is (relatively) easily adjustable but the CPU fans are controlled by a different chip that is only accessible via smbus and hence far more complex to access. Though by no means impossible.
You could swap out the fans. You could fit in line speed reducers/controllers.
Be aware that any of those options will reduce air-flow increasing temperatures inside the case and potentially reducing component life. You have been warned etc…. ;)
Steve
-
Thanks Stephenw10, I'll start looking into replacement fans. Unfortunately I have a feeling that I might be putting the XTM525 on sale and installing pfsense on a Dell T30 server.
Thanks once again -
I started tinkering with this a little bit and have a question. Have you essentially extracted and "disassembled" the DSDT using the Intel iasl compiler, then edited it to include the new P-states, then re-compiled and re-inserted into the BIOS? I am doing all of my tinkering from Arch Linux so overriding the BIOS supplied DSDT at boot time for testing purposes would be quite easy…
I also loaded Windows 7 onto the box and I got really weird results while testing Speedstep: CPU-Z shows the multiplier changing dynamically between 6.0x and 8.5x on my Q9505s CPU, but at exactly the same time HWiNFO64 shows the multiplier fixed at 8.5x and voltage fixed at 1.2V.
It all seems to work consistently on my "PC" which is an Asus P5KE, despite that board not officially supporting the Q9505s. I pulled and disassembled the DSDT from the P5K to see how it dynamically detects the CPU power states, as opposed to hard coding the table specific to one CPU only...
What's really annoying is that I did once have it sort of working. I had to override the DSDT table with one I had added P-state values to though.
Problem is it's so long ago now I can't remember exactly what I did. ::)
https://forum.pfsense.org/index.php?topic=43574.msg265760#msg265760
Steve
