FTP again :/
- 
 Try as I might, I couldn't set forwarding to FTP… 
 No matter if I forward the 21 port or 21 + Passive set taken from my FTP server, no matter if the helper on WAN/LAN is enabled, disabled... I looked throughout the forum... I can't make it working :(My config: WAN = adsl router in bridge mode, 
 PFsense LAN IP 10.0.209.1FTP server 10.0.209.10:21... Maybe someone would be so kind and helped me step by step with that... 
 Sometimes I managed to get it working but only at Active... no passive :( :(Best regards, 
 FISHRMAN
- 
 Any chance that you are using multiwan? 
- 
 No I am not. 
 But I finally made it work :)
 Didnt need to forward port 20 :P
- 
 Yeah, just need to forward port 21. 
- 
 do you have the procedure ?, because i tried to resolve the same problem, (from lan to wan) but when make the ls , not return any results. (i test with passive or active mode), but nothing. 
- 
 http://wiki.pfsense.com/wikka.php?wakka=FTPTroubleShooting 
- 
 sullrich, yeaaaa, thanks sr. just in the target *