Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Sarg package for pfsense

    pfSense Packages
    99
    467
    430.2k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • L
      lucapsg
      last edited by

      Wow, a rocket!
      Update installed, now the value entered in the 'LDAP search filter' is properly registered in sarg.conf. (I'm curious, where it was saved before?)
      After saving each tab and pressing 'Force update now' in the report still does not appear the full name of the user.
      From the Windows logs, there's no news, no attempt to access.
      I look forward to doing more tests.

      1 Reply Last reply Reply Quote 0
      • marcellocM
        marcelloc
        last edited by

        try to tcpdump connections from pfsense to active directory.

        maybe you have a ldap server fqdn configured that pfsense can't resolve.

        Treinamentos de Elite: http://sys-squad.com

        Help a community developer! ;D

        1 Reply Last reply Reply Quote 0
        • L
          lucapsg
          last edited by

          As I said, I'm using the same configuration used in System-> User Manager-> Servers and tests made ​​by Diagnostic-> Authentication confirm it is working.
          However, to remove any doubt, in the 'LDAP Hostname' I'm using the IP.
          Now I check with tcpdump … stay tuned...

          1 Reply Last reply Reply Quote 0
          • DonnyD
            Donny
            last edited by

            Hello Marcelloc,

            I just a little bit confuse between SARG ldap setting (User tab) and Squid authentication with LDAP. If I understand collect when I used Squid authentication with LDAP, I don't need to use SARG ldap settings right.
            Could you explain what is difference between SARG ldap setting and Squid authentication with LDAP, please?

            Thank u

            1 Reply Last reply Reply Quote 0
            • L
              lucapsg
              last edited by

              During the update of the report and also in the tab 'Realtime', tcpdump has not caught anything on port 389.
              To verify that the settings used in 'tcpdump' is correct I tried to capture traffic made ​​with Diagnostic-> Authentication and actually a bit of broth was captured.
              pfSense is 192.168.152.1 while Windows 2003 is 192.168.152.200, both in a VMware test environment:

              17:08:16.107802 IP 192.168.152.1.61250 > 192.168.152.200.389: tcp 0
              17:08:16.109616 IP 192.168.152.200.389 > 192.168.152.1.61250: tcp 0
              17:08:16.109692 IP 192.168.152.1.61250 > 192.168.152.200.389: tcp 0
              17:08:16.109964 IP 192.168.152.1.61250 > 192.168.152.200.389: tcp 62
              17:08:16.112227 IP 192.168.152.200.389 > 192.168.152.1.61250: tcp 22
              ecc…

              @Donny: In Squid LDAP is used to "authenticate", while in Sarg to replace the username with the full name of the user in reports.

              1 Reply Last reply Reply Quote 0
              • DonnyD
                Donny
                last edited by

                @lucapsg:

                During the update of the report and also in the tab 'Realtime', tcpdump has not caught anything on port 389.
                To verify that the settings used in 'tcpdump' is correct I tried to capture traffic made ​​with Diagnostic-> Authentication and actually a bit of broth was captured.
                pfSense is 192.168.152.1 while Windows 2003 is 192.168.152.200, both in a VMware test environment:

                17:08:16.107802 IP 192.168.152.1.61250 > 192.168.152.200.389: tcp 0
                17:08:16.109616 IP 192.168.152.200.389 > 192.168.152.1.61250: tcp 0
                17:08:16.109692 IP 192.168.152.1.61250 > 192.168.152.200.389: tcp 0
                17:08:16.109964 IP 192.168.152.1.61250 > 192.168.152.200.389: tcp 62
                17:08:16.112227 IP 192.168.152.200.389 > 192.168.152.1.61250: tcp 22
                ecc…

                @Donny: In Squid LDAP is used to "authenticate", while in Sarg to replace the username with the full name of the user in reports.

                Hello lucapsg,

                It mean, I have to use both if I need full user name of the user in sarg reports. Is it correct?

                Thank u

                1 Reply Last reply Reply Quote 0
                • H
                  Hugovsky
                  last edited by

                  HI all.  I have same problem with ldap. With system>user manager some traffic shows up in tcpdump and correctly connects. Nothing with users in sarg reports.

                  Edit: last package update was just now.

                  1 Reply Last reply Reply Quote 0
                  • L
                    lucapsg
                    last edited by

                    @Donny, well, if you have an LDAP directory and you want to authenticate users (Squid) And you also want to display the full name of the user in report (Sarg), then YES.
                    Or at least we're working on so that this is possible  ;)

                    Sarg can do also (and already does) replacement using its own internal function. See field 'Users Association' in Status->Sarg Reports->Users, but in my judgment is only recommended for a small number of users and/or if Squid authenticates users with their own list.

                    @ Marcelloc, any news?

                    1 Reply Last reply Reply Quote 0
                    • marcellocM
                      marcelloc
                      last edited by

                      @lucapsg:

                      Marcelloc, any news?

                      try to run sarg on console/ssh to see if it returns ldap erros or something.

                      Treinamentos de Elite: http://sys-squad.com

                      Help a community developer! ;D

                      1 Reply Last reply Reply Quote 0
                      • L
                        lucapsg
                        last edited by

                        I tried this …

                        
[2.0.1-RELEASE][admin@pfsense.virtualdomain.lan]/root(9): sarg
SARG: Records in file: 1093, reading: 100.00%
SARG: Successful report generated on /usr/local/www/sarg-reports/24Apr2012-24Apr2012
SARG: (removetmp) Cannot open file /usr/local/www/sarg-reports/24Apr2012-24Apr2012/sarg-general

                        …but...

                        
[2.0.1-RELEASE][admin@pfsense.virtualdomain.lan]/root(10): ls -l /usr/local/www/sarg-reports/24Apr2012-24Apr2012
ls: /usr/local/www/sarg-reports/24Apr2012-24Apr2012: No such file or directory

                        … is it useful?

                        1 Reply Last reply Reply Quote 0
                        • K
                          klamath
                          last edited by

                          @marcelloc:

                          I've just pushed a fix to Sort Fields in Reverse order check.

                          Reinstall the package in 15 minutes.

                          Thanks for the user_sort_field BYTES REVERSE!!!
                          This is Exactly what I was expected!

                          HP ProLiant MicroServer N40L - 2GB - 250G HD - 3 NIC Intel PRO/1000 MT Gigabit PCI
                          pfSense 2.0.1-RELEASE (amd64)

                          1 Reply Last reply Reply Quote 0
                          • DonnyD
                            Donny
                            last edited by

                            @lucapsg:

                            @Donny, well, if you have an LDAP directory and you want to authenticate users (Squid) And you also want to display the full name of the user in report (Sarg), then YES.
                            Or at least we're working on so that this is possible  ;)

                            Sarg can do also (and already does) replacement using its own internal function. See field 'Users Association' in Status->Sarg Reports->Users, but in my judgment is only recommended for a small number of users and/or if Squid authenticates users with their own list.

                            @ Marcelloc, any news?

                            Thank a lot,

                            OK, Do I need to create authentication servers for LDAP at option System-> User Manager >Servers, when I use both of Squid authenticate and SARG Ldap setting. Is it possible if you can show me how you configuration SARG Ldap setting option? Did you success to get full user name in sarg report?. for me I only got user name login in sarg report. It is not full name.

                            1 Reply Last reply Reply Quote 0
                            • L
                              lucapsg
                              last edited by

                              For user authentication with Squid/LDAP see this post:
                              http://forum.pfsense.org/index.php/topic, 47409.0.html

                              As for replacing the username with the corresponding user's full name with Sarg/LDAP instructions are given in this tread, but there is still something that does not work, at least in my case  :-\

                              1 Reply Last reply Reply Quote 0
                              • DonnyD
                                Donny
                                last edited by

                                @lucapsg:

                                For user authentication with Squid/LDAP see this post:
                                http://forum.pfsense.org/index.php/topic, 47409.0.html

                                As for replacing the username with the corresponding user's full name with Sarg/LDAP instructions are given in this tread, but there is still something that does not work, at least in my case  :-\

                                The links that you give it to me, I already done and tested before but I only get user login name. you can check the links below.
                                http://forum.pfsense.org/index.php/topic,48347.msg257526.html#msg257526

                                Thank u

                                1 Reply Last reply Reply Quote 0
                                • DonnyD
                                  Donny
                                  last edited by

                                  Hello Marcelloc,

                                  At Sarg "Users" tab, I try to config Ldap to get it work for full user name. At sarg ldap setting, I have configured the same CN, OU and DC as I have done with squid Ldap authenticate. so, I try many time to get full user name but it is not work. anyway try again tomorrow.

                                  Thank u

                                  1 Reply Last reply Reply Quote 0
                                  • I
                                    IGIdeus
                                    last edited by

                                    @klamath:

                                    @marcelloc:

                                    I've just pushed a fix to Sort Fields in Reverse order check.

                                    Reinstall the package in 15 minutes.

                                    Thanks for the user_sort_field BYTES REVERSE!!!
                                    This is Exactly what I was expected!

                                    Hi,

                                    I can also confirm. But first I had to uncheck and check option again to work.

                                    Best regards
                                    IGIdeus

                                    1 Reply Last reply Reply Quote 0
                                    • DonnyD
                                      Donny
                                      last edited by

                                      Have any news over SARG reports with full usernames instead of user name logins?

                                      Thank u

                                      1 Reply Last reply Reply Quote 0
                                      • marcellocM
                                        marcelloc
                                        last edited by

                                        @Donny:

                                        Have any news over SARG reports with full usernames instead of user name logins?

                                        No time to test yet.

                                        Did you tried to run sarg on console with ldap info? did it returned any error?

                                        Treinamentos de Elite: http://sys-squad.com

                                        Help a community developer! ;D

                                        1 Reply Last reply Reply Quote 0
                                        • DonnyD
                                          Donny
                                          last edited by

                                          @marcelloc:

                                          @Donny:

                                          Have any news over SARG reports with full usernames instead of user name logins?

                                          No time to test yet.

                                          Did you tried to run sarg on console with ldap info? did it returned any error?

                                          Ok, I will try

                                          Sarg detail from console. I could not find any returned  error.

                                          [2.0.1-RELEASE][admin@xxxx.nxxxter.dsns]/root(1): sarg
SARG: Records in file: 2140, reading: 100.00%
SARG: Successful report generated on /usr/local/www/sarg-reports/25Apr2012-25Apr 2012
[2.0.1-RELEASE][admin@xxxx.nxxxter.dsns]/root(2): sarg -z
SARG: TAG: access_log /var/squid/logs/access.log
SARG: TAG: graphs yes
SARG: TAG: output_dir /usr/local/www/sarg-reports
SARG: TAG: anonymous_output_files no
SARG: TAG: resolve_ip no
SARG: TAG: user_ip no
SARG: TAG: topuser_sort_field BYTES NORMAL
SARG: TAG: user_sort_field BYTES NORMAL
SARG: TAG: exclude_users /usr/local/etc/sarg/exclude_users.conf
SARG: TAG: exclude_hosts /usr/local/etc/sarg/exclude_hosts.conf
SARG: TAG: date_format e
SARG: TAG: lastlog 0
SARG: TAG: remove_temp_files yes
SARG: TAG: index yes
SARG: TAG: index_tree file
SARG: TAG: overwrite_report yes
SARG: TAG: use_comma yes
SARG: TAG: exclude_codes /usr/local/etc/sarg/exclude_codes
SARG: TAG: max_elapsed 0
SARG: TAG: report_type topusers topsites sites_users users_sites date_time denied auth_failures site_user_time_date downloads
SARG: TAG: usertab none
SARG: TAG: LDAPHost 172.31.21.10
SARG: TAG: LDAPBindDN cn=Administrator,cn=Users,dc=nxxxter,dc=dsns
SARG: TAG: LDAPBindPW MyLdapPassWord
SARG: TAG: LDAPBaseSearch dc=nxxxter,dc=dsns
SARG: TAG: LDAPFilterSearch sAMAccountName=%s
SARG: TAG: long_url no
SARG: TAG: date_time_by bytes
SARG: TAG: charset UTF-8
SARG: TAG: privacy no
SARG: TAG: bytes_in_sites_users_report no
SARG: TAG: topuser_num 0
SARG: TAG: dansguardian_conf
SARG: TAG: show_sarg_info no
SARG: TAG: show_sarg_logo no
SARG: TAG: displayed_values bytes
SARG: TAG: authfail_report_limit 0
SARG: TAG: denied_report_limit 0
SARG: TAG: siteusers_report_limit 0
SARG: TAG: user_report_limit 0
SARG: TAG: www_document_root /usr/local/www
SARG: TAG: ntlm_user_format domainname+username
SARG: TAG: realtime_refresh_time 0
SARG: TAG: realtime_types GET,PUT,CONNECT
SARG: TAG: realtime_unauthenticated_records show
SARG: TAG: sorttable /sarg_sorttable.js
SARG: TAG: hostalias /usr/local/etc/sarg/hostalias
SARG: Records in file: 2140, reading: 100.00%
SARG: (info) date=25/04/2012
SARG: (info) period=25 Apr 2012
SARG: (info) outdirname=/usr/local/www/sarg-reports/25Apr2012-25Apr2012
SARG: (info) Dansguardian report not produced because no dansguardian configuration file was provided
SARG: (info) No redirector logs provided to produce that kind of report
SARG: (info) Downloaded files report not generated as it is empty
SARG: (info) Denied report not produced because it is empty
SARG: (info) Redirector report not generated because it is empty
SARG: Successful report generated on /usr/local/www/sarg-reports/25Apr2012-25Apr2012
[2.0.1-RELEASE][admin@xxxx.nxxxter.dsns]/root(3):

                                          [2.0.1-RELEASE][admin@xxxx.nxxxter.dsns]/root(9): sarg -x
SARG: Init
SARG: Loading configuration from /usr/local/etc/sarg/sarg.conf
SARG: Loading exclude host file from: /usr/local/etc/sarg/exclude_hosts.conf
SARG: Loading exclude file from: /usr/local/etc/sarg/exclude_users.conf
SARG: Reading host alias file "/usr/local/etc/sarg/hostalias"
SARG: List of host names to alias:
SARG: Parameters:
SARG:           Hostname or IP address (-a) =
SARG:                    Useragent log (-b) =
SARG:                     Exclude file (-c) = /usr/local/etc/sarg/exclude_hosts.conf
SARG:                  Date from-until (-d) =
SARG:    Email address to send reports (-e) =
SARG:                      Config file (-f) = /usr/local/etc/sarg/sarg.conf
SARG:                      Date format (-g) = Europe (dd/mm/yyyy)
SARG:                        IP report (-i) = No
SARG:                        Input log (-l) = /var/squid/logs/access.log
SARG:               Resolve IP Address (-n) = No
SARG:                       Output dir (-o) = /usr/local/www/sarg-reports/
SARG: Use Ip Address instead of userid (-p) = No
SARG:                    Accessed site (-s) =
SARG:                             Time (-t) =
SARG:                             User (-u) =
SARG:                    Temporary dir (-w) = /tmp/sarg
SARG:                   Debug messages (-x) = Yes
SARG:                 Process messages (-z) = No
SARG:  Previous reports to keep (--lastlog) = 0
SARG:
SARG: sarg version: 2.3.2 Nov-23-2011
SARG: Reading access log file: /var/squid/logs/access.log
SARG: Records in file: 61, reading: 100.00%
SARG:    Records read: 61, written: 61, excluded: 0
SARG: Squid log format
SARG: Period: 26 Apr 2012
SARG: pre-sorting files
SARG: Making file: /tmp/sarg/noppy
SARG: Sorting file: /tmp/sarg/noppy.utmp
SARG: Making report: noppy
SARG: Making index.html
SARG: Successful report generated on /usr/local/www/sarg-reports/26Apr2012-26Apr2012
SARG: Purging temporary file sarg-general
SARG: End
                                          1 Reply Last reply Reply Quote 0
                                          • marcellocM
                                            marcelloc
                                            last edited by

                                            I saw no ldap info on sarg output.

                                            I'll check sarg compile options.

                                            att,
                                            Marcello Coutinho

                                            Treinamentos de Elite: http://sys-squad.com

                                            Help a community developer! ;D

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post