Build fails - ERROR Building libtool
-
And, me too. Building libtool step never progresses.
-
Good to know that i'm not the only one!
I've set up 2 more fresh builder VM's and followed the wiki precisely but always get the same problem :( -
Hello Guys,
I have tried out the new buildports.RELENG_2_0 (4/5/11 16:30EST) and it is still skipping building ports even when it should.There are also several ports like libxml2 that keeps trying to rebuild but always says skipping. -
-
so does:
./set_version.sh RELENG_2_0 cvsup17.freebsd.org -
Try update your ports (with ./update_git_repos.sh) - there were some changes made yesterday which should fix the problems you were seeing.
-
Try update your ports (with ./update_git_repos.sh) - there were some changes made yesterday which should fix the problems you were seeing.
I've just tried and it stopped at "Executing buildports.RELENG_2_0"
I've updated ports, source code and pfsense-tools but still not working. -
It should eventually continue after that, how long did you leave it for?
-
-
Over 1 hour.
heh, ok no it should not be that long. Try do a clean_build.sh, apply_kernel_patches.sh and re-run the build_pfPorts.sh
-
I have tried a couple of times and I had errors on build, but since I have built once, the errors doesn't seems stop a successful build of the iso. I am also still skipping build where when building 2.1, I don't skip. On re-building the iso and updates on 2.1, all the ports are rebuilt and forced into registering (effectively doing a port upgrade). 2.0 apparently sees that it is already installed and does not re-compile. The problem is that with the customizations and patches to the system, it makes any normal FreeBSD port upgrade method useless.
I am currently build 2.1 images in the virtual server and will paste the 2.0.1 build errors in here at a later time. -
heh, ok no it should not be that long. Try do a clean_build.sh, apply_kernel_patches.sh and re-run the build_pfPorts.sh
I did but had lot of errors again.
-
Well … the same errors are now present in the 2.1 builds. Yet it still builds ISOs and updates.
>>> Overlaying pfPorts /home/pfsense/tools/builder_scripts/../../tools/pfPorts/unbound to /usr/ports/dns/unbound and building... >>> gmake(gmake-3.82)...already built on this run. Skipping. >>> libevent(libevent-1.4.14b_2)...already built on this run. Skipping. >>> gmake(gmake-3.82)...already built on this run. Skipping. >>> libtool(libtool-2.4.2)...already built on this run. Skipping. >>> Building ldns(ldns-1.6.12)...Done. >>> expat2(expat-2.0.1_2)...already built on this run. Skipping. >>> Building unbound(unbound-1.4.16)...Done. >>> Ports with failures: 3 >>> Building libart_lgpl(libart_lgpl-2.3.21,1)...ERROR! >>> Building freetype2(freetype2-2.4.2)...ERROR! >>> Building olsrd(olsrd-0.5.6.r7)...ERROR! >>> Building athstats...main.c: In function 'getfmt': main.c:73: warning: implicit declaration of function 'strcasecmp' Done!
-
Well … the same errors are now present in the 2.1 builds. Yet it still builds ISOs and updates.
>>> Overlaying pfPorts /home/pfsense/tools/builder_scripts/../../tools/pfPorts/unbound to /usr/ports/dns/unbound and building... >>> gmake(gmake-3.82)...already built on this run. Skipping. >>> libevent(libevent-1.4.14b_2)...already built on this run. Skipping. >>> gmake(gmake-3.82)...already built on this run. Skipping. >>> libtool(libtool-2.4.2)...already built on this run. Skipping. >>> Building ldns(ldns-1.6.12)...Done. >>> expat2(expat-2.0.1_2)...already built on this run. Skipping. >>> Building unbound(unbound-1.4.16)...Done. >>> Ports with failures: 3 >>> Building libart_lgpl(libart_lgpl-2.3.21,1)...ERROR! >>> Building freetype2(freetype2-2.4.2)...ERROR! >>> Building olsrd(olsrd-0.5.6.r7)...ERROR! >>> Building athstats...main.c: In function 'getfmt': main.c:73: warning: implicit declaration of function 'strcasecmp' Done!
I'm having same errors.
-
>>> Building libart_lgpl(libart_lgpl-2.3.21,1)...ERROR! >>> Building freetype2(freetype2-2.4.2)...ERROR! >>> Building olsrd(olsrd-0.5.6.r7)...ERROR! >>> Building athstats...main.c: In function 'getfmt': main.c:73: warning: implicit declaration of function 'strcasecmp' Done!
I thought i had checked in a fix for this ^^, these actually would fail now on any build if you have updated your ports. There was a change to pkg-config which causes the first two ports to fail. olsrd is moving to a package, so that should be removed. I will try finish that package in the next few days and have it removed from the build setup. I will get this fixed and report back.
-
Okay. Thanks for your caring.
-
Thanks wagonza. I try to keep my build servers up-to-date. This is why I would like for the build scripts to rebuild ports. Right now, it looks like if the port is already installed, it skips building it. I would like to keep it so that if /tmp/pgPorts_forced_build_required is still there to have it rebuild all the ports in the list with at least the BATCH and FORCE_PKG_REGISTER options set so that the ports and the installed files are updated. Let me know if that is just not realistic.
-
No problem. Do a ./update_git_repos.sh and rebuild it should be working now.
Ill look at the /tmp/pfPorts_forced_build_required bit and see - it still needs a lot of tuning. -
Thanks wagonza … I will let you know the outcome.
-
Unfortunately the error issue persists.
>>> Building gogoc(gogoc-1.2)...Done. >>> Ports with failures: 4 >>> Building libart_lgpl(libart_lgpl-2.3.21,1)...ERROR! >>> Building freetype2(freetype2-2.4.2)...ERROR! >>> Building olsrd(olsrd-0.5.6.r7)...ERROR! >>> Building ioncube(ioncube-4.0.12)...ERROR! >>> Building athstats...main.c: In function 'getfmt': main.c:73: warning: implicit declaration of function 'strcasecmp' Done! >>> Building tools/crytpo...Done! ==> End of pfPorts...