Usando Wireless USB no pfsense

[gst.freitas]

Pessoal,

Coloquei uma wireless usb modelo EW-7318USG (ralink) no pfsense.. ele reconhece.

#ugen1.2: <802.11 bg WLAN Ralink> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON

rum0_wlan0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
        ether 00:1f:1f:14:3e:b0
        inet6 fe80::21f:1fff:fe14:3eb0%rum0_wlan0 prefixlen 64 scopeid 0xa
        inet 192.168.20.2 netmask 0xffffffff broadcast 192.168.20.2
        nd6 options=3 <performnud,accept_rtadv>media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
        status: running
        ssid labexpert channel 2 (2417 MHz 11g) bssid 00:1f:1f:14:3e:b0
        regdomain FCC country BR indoor authmode WPA2/802.11i privacy MIXED
        deftxkey 2 TKIP 2:128-bit TKIP 3:128-bit txpower 30 scanvalid 60
        protmode CTS dtimperiod 1 -dfs</hostap></performnud,accept_rtadv></up,broadcast,running,promisc,simplex,multicast>

Só que esta dando uns erros.. eis

rum0: need multicast update callback
rum0_wlan0: ieee80211_new_state_locked: pending RUN -> SCAN transition lost
rum0: need multicast update callback
rum0: need multicast update callback
rum0_wlan0: ieee80211_new_state_locked: pending RUN -> SCAN transition lost

Não consegui identificar o que seria…

[marcelloc]

Voce está perdendo conexão nesta interface ou so esta vendo os alertas?