Please help to configure Squid (Transparent) + Multiwan Load Balancing in PFS 2

[amitaussie]

Anybody , please ppost detailed configuration to implement squid (transparent) + multi wan load balancing on PFsense 2.0.1

[galaxy60]

Create a Gateway Group with your two WANS, change your Lan's outbound internet traffic from default gateway to your new gateway group.  Setup squid in transparent mode add a custom options rule at the bottom with the following:-  tcp_outgoing_address 127.0.0.1

Then goto outbound NAT and create a rule for each of your WANS as below

WAN    127.0.0.0/8 * * * * * NO    WAN_1 Rule
WAN2  127.0.0.0/8 * * * * * NO    WAN_2 Rule

Now create a floating firewall rule as below

TCP WAN_MAIN address * * 80 (HTTP) Loadbalance1 none   GW1andGW2