Pf Sense does not recognize Giga PHY Realtek RTL8211CL Lan
-
Hello All,
I have just done my first installation of pf Sense and as it turns out my on-board LAN card is not recognized. I am running an old Asrock N68PV-GS (http://www.asrock.com/mb/overview.asp?Model=N68PV-GS) that has a Nvidia chip set featuring the Giga PHY Realtek RTL8211CL. I have two additional cards installed and I am running just fine but would like to have the option of load balancing in the future, and running a WAP off of one of the other ports for now.
Anyone have any experience with this type of NIC? Can someone point me in the right direction please?
Thank you,
Kevin -
-
Sorry for the delay I have been pulled off this project for a couple of days, here is the result of that command. I think that I see it in this report and it is listed as either nfe0 or rgephy0. I do not have that listed in my Interfaces how ever, it is just vr0 and vr1. There is a warning but i believe that it has more to do about an improper shut down or something.
$ dmesg Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.1-RELEASE-p6 #0: Mon Dec 12 17:53:00 EST 2011 root@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 i386 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) Processor LE-1620 (2394.16-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x50ff3 Family = f Model = 5f Stepping = 3 Features=0x78bfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2>Features2=0x2001 <sse3,cx16>AMD Features=0xea500800 <syscall,nx,mmx+,ffxsr,rdtscp,lm,3dnow!+,3dnow!>AMD Features2=0x1d <lahf,svm,extapic,cr8>real memory = 1073741824 (1024 MB) avail memory = 895770624 (854 MB) ACPI APIC Table: <020509 APIC1521> ioapic0: Changing APIC ID to 1 ioapic0 <version 1.1="">irqs 0-23 on motherboard netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/. wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (wpi_fw, 0xc0988300, 0) error 1 ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0789340, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07893e0, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0789480, 0) error 1 wlan: mac acl policy registered kbd1 at kbdmux0 cryptosoft0: <software crypto="">on motherboard padlock0: No ACE support. acpi0: <020509 RSDT1521> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of fefe1000, 1000 (3) failed acpi0: reservation of fee01000, ff000 (3) failed acpi0: reservation of fec00000, 1000 (3) failed acpi0: reservation of fee00000, 1000 (3) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 3ff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <acpi cpu="">on acpi0 pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0 pci0: <acpi pci="" bus="">on pcib0 pci0: <memory, ram="">at device 0.0 (no driver attached) isab0: <pci-isa bridge="">port 0x1f00-0x1fff at device 1.0 on pci0 isa0: <isa bus="">on isab0 pci0: <serial bus,="" smbus="">at device 1.1 (no driver attached) pci0: <processor>at device 1.3 (no driver attached) ohci0: <ohci (generic)="" usb="" controller="">mem 0xfde7f000-0xfde7ffff irq 22 at device 2.0 on pci0 ohci0: [ITHREAD] usbus0: <ohci (generic)="" usb="" controller="">on ohci0 ehci0: <ehci (generic)="" usb="" 2.0="" controller="">mem 0xfde7ec00-0xfde7ecff irq 23 at device 2.1 on pci0 ehci0: [ITHREAD] usbus1: EHCI version 1.0 usbus1: <ehci (generic)="" usb="" 2.0="" controller="">on ehci0 ohci1: <ohci (generic)="" usb="" controller="">mem 0xfde7d000-0xfde7dfff irq 20 at device 4.0 on pci0 ohci1: [ITHREAD] usbus2: <ohci (generic)="" usb="" controller="">on ohci1 ehci1: <ehci (generic)="" usb="" 2.0="" controller="">mem 0xfde7e800-0xfde7e8ff irq 21 at device 4.1 on pci0 ehci1: [ITHREAD] usbus3: EHCI version 1.0 usbus3: <ehci (generic)="" usb="" 2.0="" controller="">on ehci1 atapci0: <nvidia nforce="" mcp67="" udma133="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 6.0 on pci0 ata0: <ata 0="" channel="">on atapci0 ata0: [ITHREAD] ata1: <ata 1="" channel="">on atapci0 ata1: [ITHREAD] pci0: <multimedia, hda="">at device 7.0 (no driver attached) pcib1: <acpi pci-pci="" bridge="">at device 8.0 on pci0 pci1: <acpi pci="" bus="">on pcib1 vr0: <via 10="" vt6105="" rhine="" iii="" 100basetx="">port 0xe800-0xe8ff mem 0xfdfffc00-0xfdfffcff irq 10 at device 8.0 on pci1 vr0: Quirks: 0x0 vr0: Revision: 0x8b miibus0: <mii bus="">on vr0 ukphy0: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: [ITHREAD] vr1: <via 10="" vt6105="" rhine="" iii="" 100basetx="">port 0xe400-0xe4ff mem 0xfdfff800-0xfdfff8ff irq 10 at device 10.0 on pci1 vr1: Quirks: 0x0 vr1: Revision: 0x8b miibus1: <mii bus="">on vr1 ukphy1: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus1 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr1: [ITHREAD] atapci1: <nvidia nforce="" mcp67="" sata300="" controller="">port 0xf80-0xf87,0xf00-0xf03,0xe80-0xe87,0xe00-0xe03,0xcc00-0xcc0f mem 0xfde76000-0xfde77fff irq 23 at device 9.0 on pci0 atapci1: [ITHREAD] atapci1: AHCI v1.10 controller with 4 3Gbps ports, PM supported ata2: <ata 0="" channel="">on atapci1 ata2: [ITHREAD] ata3: <ata 1="" channel="">on atapci1 ata3: [ITHREAD] ata4: <ata 2="" channel="">on atapci1 ata4: [ITHREAD] ata5: <ata 3="" channel="">on atapci1 ata5: [ITHREAD] [color]nfe0: <nvidia nforce="" mcp67="" networking="" adapter="">port 0xc880-0xc887 mem 0xfde7c000-0xfde7cfff,0xfde7e400-0xfde7e4ff,0xfde7e000-0xfde7e00f irq 20 at device 10.0 on pci0 miibus2: <mii bus="">on nfe0 rgephy0: <rtl8169s 8110s="" 8211b="" media="" interface="">PHY 3 on miibus2 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER][/color] pcib2: <acpi pci-pci="" bridge="">at device 11.0 on pci0 pci2: <acpi pci="" bus="">on pcib2 pcib3: <acpi pci-pci="" bridge="">at device 12.0 on pci0 pci3: <acpi pci="" bus="">on pcib3 pcib4: <acpi pci-pci="" bridge="">at device 13.0 on pci0 pci4: <acpi pci="" bus="">on pcib4 pcib5: <acpi pci-pci="" bridge="">at device 14.0 on pci0 pci5: <acpi pci="" bus="">on pcib5 pcib6: <acpi pci-pci="" bridge="">at device 15.0 on pci0 pci6: <acpi pci="" bus="">on pcib6 pcib7: <acpi pci-pci="" bridge="">at device 16.0 on pci0 pci7: <acpi pci="" bus="">on pcib7 pcib8: <acpi pci-pci="" bridge="">at device 17.0 on pci0 pci8: <acpi pci="" bus="">on pcib8 vgapci0: <vga-compatible display="">mem 0xfc000000-0xfcffffff,0xd0000000-0xdfffffff,0xfb000000-0xfbffffff irq 21 at device 18.0 on pci0 acpi_button0: <power button="">on acpi0 fdc0: <floppy drive="" controller="" (fde)="">port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] ppc0: <parallel port="">port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppc0: [ITHREAD] ppbus0: <parallel port="" bus="">on ppc0 plip0: <plip network="" interface="">on ppbus0 plip0: [ITHREAD] lpt0: <printer>on ppbus0 lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <parallel i="" o="">on ppbus0 atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] pmtimer0 on isa0 sc0: <system console="">at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0 atkbd0: <at keyboard="">irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] powernow0: <powernow! k8="">on cpu0 Timecounter "TSC" frequency 2394156367 Hz quality 800 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 ugen0.1: <nvidia>at usbus0 uhub0: <nvidia 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0 ugen1.1: <nvidia>at usbus1 uhub1: <nvidia 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1 ugen2.1: <nvidia>at usbus2 uhub2: <nvidia 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2 ugen3.1: <nvidia>at usbus3 uhub3: <nvidia 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus3 ad10: 152627MB <seagate st3160813as="" cc2h="">at ata5-master UDMA100 SATA 3Gb/s uhub0: 6 ports with 6 removable, self powered uhub2: 6 ports with 6 removable, self powered uhub1: 6 ports with 6 removable, self powered uhub3: 6 ports with 6 removable, self powered Trying to mount root from ufs:/dev/ad10s1a WARNING: / was not properly dismounted WARNING: R/W mount of / denied. Filesystem is not clean - run fsck pflog0: promiscuous mode enabled vr0: promiscuous mode enabled vr1: link state changed to UP vr1: link state changed to DOWN vr1: link state changed to UP nfe0: link state changed to DOWN vr0: link state changed to UP vr0: promiscuous mode disabled vr0: promiscuous mode enabled ng0: changing name to 'pppoe0' vr0: promiscuous mode disabled vr0: promiscuous mode enabled pflog0: promiscuous mode disabled Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 done All buffers synced. Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.1-RELEASE-p6 #0: Mon Dec 12 17:53:00 EST 2011 root@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 i386 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) Processor LE-1620 (2394.15-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x50ff3 Family = f Model = 5f Stepping = 3 Features=0x78bfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2>Features2=0x2001 <sse3,cx16>AMD Features=0xea500800 <syscall,nx,mmx+,ffxsr,rdtscp,lm,3dnow!+,3dnow!>AMD Features2=0x1d <lahf,svm,extapic,cr8>real memory = 1073741824 (1024 MB) avail memory = 895770624 (854 MB) ACPI APIC Table: <020509 APIC1521> ioapic0: Changing APIC ID to 1 ioapic0 <version 1.1="">irqs 0-23 on motherboard netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/. wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (wpi_fw, 0xc0988300, 0) error 1 ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0789340, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07893e0, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0789480, 0) error 1 wlan: mac acl policy registered kbd1 at kbdmux0 cryptosoft0: <software crypto="">on motherboard padlock0: No ACE support. acpi0: <020509 RSDT1521> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of fefe1000, 1000 (3) failed acpi0: reservation of fee01000, ff000 (3) failed acpi0: reservation of fec00000, 1000 (3) failed acpi0: reservation of fee00000, 1000 (3) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 3ff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <acpi cpu="">on acpi0 pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0 pci0: <acpi pci="" bus="">on pcib0 pci0: <memory, ram="">at device 0.0 (no driver attached) isab0: <pci-isa bridge="">port 0x1f00-0x1fff at device 1.0 on pci0 isa0: <isa bus="">on isab0 pci0: <serial bus,="" smbus="">at device 1.1 (no driver attached) pci0: <processor>at device 1.3 (no driver attached) ohci0: <ohci (generic)="" usb="" controller="">mem 0xfde7f000-0xfde7ffff irq 22 at device 2.0 on pci0 ohci0: [ITHREAD] usbus0: <ohci (generic)="" usb="" controller="">on ohci0 ehci0: <ehci (generic)="" usb="" 2.0="" controller="">mem 0xfde7ec00-0xfde7ecff irq 23 at device 2.1 on pci0 ehci0: [ITHREAD] usbus1: EHCI version 1.0 usbus1: <ehci (generic)="" usb="" 2.0="" controller="">on ehci0 ohci1: <ohci (generic)="" usb="" controller="">mem 0xfde7d000-0xfde7dfff irq 20 at device 4.0 on pci0 ohci1: [ITHREAD] usbus2: <ohci (generic)="" usb="" controller="">on ohci1 ehci1: <ehci (generic)="" usb="" 2.0="" controller="">mem 0xfde7e800-0xfde7e8ff irq 21 at device 4.1 on pci0 ehci1: [ITHREAD] usbus3: EHCI version 1.0 usbus3: <ehci (generic)="" usb="" 2.0="" controller="">on ehci1 atapci0: <nvidia nforce="" mcp67="" udma133="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 6.0 on pci0 ata0: <ata 0="" channel="">on atapci0 ata0: [ITHREAD] ata1: <ata 1="" channel="">on atapci0 ata1: [ITHREAD] pci0: <multimedia, hda="">at device 7.0 (no driver attached) pcib1: <acpi pci-pci="" bridge="">at device 8.0 on pci0 pci1: <acpi pci="" bus="">on pcib1 vr0: <via 10="" vt6105="" rhine="" iii="" 100basetx="">port 0xe800-0xe8ff mem 0xfdfffc00-0xfdfffcff irq 10 at device 8.0 on pci1 vr0: Quirks: 0x0 vr0: Revision: 0x8b miibus0: <mii bus="">on vr0 ukphy0: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: [ITHREAD] vr1: <via 10="" vt6105="" rhine="" iii="" 100basetx="">port 0xe400-0xe4ff mem 0xfdfff800-0xfdfff8ff irq 10 at device 10.0 on pci1 vr1: Quirks: 0x0 vr1: Revision: 0x8b miibus1: <mii bus="">on vr1 ukphy1: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus1 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr1: [ITHREAD] atapci1: <nvidia nforce="" mcp67="" sata300="" controller="">port 0xf80-0xf87,0xf00-0xf03,0xe80-0xe87,0xe00-0xe03,0xcc00-0xcc0f mem 0xfde76000-0xfde77fff irq 23 at device 9.0 on pci0 atapci1: [ITHREAD] atapci1: AHCI v1.10 controller with 4 3Gbps ports, PM supported ata2: <ata 0="" channel="">on atapci1 ata2: [ITHREAD] ata3: <ata 1="" channel="">on atapci1 ata3: [ITHREAD] ata4: <ata 2="" channel="">on atapci1 ata4: [ITHREAD] ata5: <ata 3="" channel="">on atapci1 ata5: [ITHREAD] nfe0: <nvidia nforce="" mcp67="" networking="" adapter="">port 0xc880-0xc887 mem 0xfde7c000-0xfde7cfff,0xfde7e400-0xfde7e4ff,0xfde7e000-0xfde7e00f irq 20 at device 10.0 on pci0 miibus2: <mii bus="">on nfe0 rgephy0: <rtl8169s 8110s="" 8211b="" media="" interface="">PHY 3 on miibus2 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] pcib2: <acpi pci-pci="" bridge="">at device 11.0 on pci0 pci2: <acpi pci="" bus="">on pcib2 pcib3: <acpi pci-pci="" bridge="">at device 12.0 on pci0 pci3: <acpi pci="" bus="">on pcib3 pcib4: <acpi pci-pci="" bridge="">at device 13.0 on pci0 pci4: <acpi pci="" bus="">on pcib4 pcib5: <acpi pci-pci="" bridge="">at device 14.0 on pci0 pci5: <acpi pci="" bus="">on pcib5 pcib6: <acpi pci-pci="" bridge="">at device 15.0 on pci0 pci6: <acpi pci="" bus="">on pcib6 pcib7: <acpi pci-pci="" bridge="">at device 16.0 on pci0 pci7: <acpi pci="" bus="">on pcib7 pcib8: <acpi pci-pci="" bridge="">at device 17.0 on pci0 pci8: <acpi pci="" bus="">on pcib8 vgapci0: <vga-compatible display="">mem 0xfc000000-0xfcffffff,0xd0000000-0xdfffffff,0xfb000000-0xfbffffff irq 21 at device 18.0 on pci0 acpi_button0: <power button="">on acpi0 fdc0: <floppy drive="" controller="" (fde)="">port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] ppc0: <parallel port="">port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppc0: [ITHREAD] ppbus0: <parallel port="" bus="">on ppc0 plip0: <plip network="" interface="">on ppbus0 plip0: [ITHREAD] lpt0: <printer>on ppbus0 lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <parallel i="" o="">on ppbus0 atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] pmtimer0 on isa0 sc0: <system console="">at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0 atkbd0: <at keyboard="">irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] powernow0: <powernow! k8="">on cpu0 Timecounter "TSC" frequency 2394152371 Hz quality 800 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 ugen0.1: <nvidia>at usbus0 uhub0: <nvidia 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0 ugen1.1: <nvidia>at usbus1 uhub1: <nvidia 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1 ugen2.1: <nvidia>at usbus2 uhub2: <nvidia 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2 ugen3.1: <nvidia>at usbus3 uhub3: <nvidia 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus3 ad10: 152627MB <seagate st3160813as="" cc2h="">at ata5-master UDMA100 SATA 3Gb/s uhub0: 6 ports with 6 removable, self powered uhub2: 6 ports with 6 removable, self powered uhub1: 6 ports with 6 removable, self powered uhub3: 6 ports with 6 removable, self powered Trying to mount root from ufs:/dev/ad10s1a vr0: promiscuous mode enabled ng0: changing name to 'pppoe0' vr0: promiscuous mode disabled vr0: promiscuous mode enabled nfe0: link state changed to DOWN vr0: link state changed to DOWN vr0: link state changed to UP</seagate></nvidia></nvidia></nvidia></nvidia></nvidia></nvidia></nvidia></nvidia></powernow!></at></keyboard></generic></system></at></parallel></printer></plip></parallel></parallel></floppy></power></vga-compatible></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></rtl8169s></mii></nvidia></ata></ata></ata></ata></nvidia></generic></mii></via></generic></mii></via></acpi></acpi></multimedia,></ata></ata></nvidia></ehci></ehci></ohci></ohci></ehci></ehci></ohci></ohci></processor></serial></isa></pci-isa></memory,></acpi></acpi></acpi></software></version></lahf,svm,extapic,cr8></syscall,nx,mmx+,ffxsr,rdtscp,lm,3dnow!+,3dnow!></sse3,cx16></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2></seagate></nvidia></nvidia></nvidia></nvidia></nvidia></nvidia></nvidia></nvidia></powernow!></at></keyboard></generic></system></at></parallel></printer></plip></parallel></parallel></floppy></power></vga-compatible></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></rtl8169s></mii></nvidia></ata></ata></ata></ata></nvidia></generic></mii></via></generic></mii></via></acpi></acpi></multimedia,></ata></ata></nvidia></ehci></ehci></ohci></ohci></ehci></ehci></ohci></ohci></processor></serial></isa></pci-isa></memory,></acpi></acpi></acpi></software></version></lahf,svm,extapic,cr8></syscall,nx,mmx+,ffxsr,rdtscp,lm,3dnow!+,3dnow!></sse3,cx16></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2> -
Your network interfaces are vr0, vr1 and nfe0.
You probably need to go to the pfSense Interfaces -> (assign) page and click on the "+" button at the bottom right to add nfe0 to the pool of interfaces used by pfSense.
-
Well what can I say… that was easy!!!! Thanks for your support I appreciate it a ton! Now I have one that is not used and can plug a second WAN and play with load balancing!
Sometimes my Job sucks... but they do actually pay me to do this stuff, so how bad could it really be!
-
Hmm, paid to play with pfSense. Sounds like a pretty nice job! ;D
Steve
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.