HDD BIOS SETTINGS?? Install issues
-
Hi,
I am having a bit of trouble getting pfsense to run once installed. I am using 1.2 beta 1 and it installs OK but gets into an endless loop once booting from HDD. I suspect that my bios and/or pfsense is detecting the wrong parameters etc. I have the latest bios in my motherboard. The HDD is http://www.provantage.com/seagate-st96812a~7SEGH010.htm and motherboard http://www.via.com.tw/en/products/mainboards/mini_itx/epia_en/
My bios detects the correct size but different cylinder and heads. I have tried LBA also. If I select CHS and enter manualy, the size does not correspond. The same happens when I manualy select settings when formatting under pfsense If I manualy select parameters the size of the disk it says is only 7.8Gb or so. Should be 60Gb.
Any suggestions would be great! ;D -
http://forum.pfsense.org/index.php/topic,4960.0/topicseen.html
might help you out -
Thanks. I'll give gag a go and see. I really don't want to buy another hdd as this one is brand new.
-
how will gag differ from the standard boot loader? In regards to slecting the correct disk geometry?
-
no luck with gagĀ :-[
-
Just tried a sata hard drive and its all good. Bugger bought a new ide laptop drive for nothing.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better š
Register LoginPrivacy Policy · Cookie Policy