Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Small problem with interface status in webgui

    Scheduled Pinned Locked Moved General pfSense Questions
    3 Posts 1 Posters 1.2k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • B
      blackbrayn
      last edited by

      status–> interfaces -->In/out packets , In/out packets (pass) ,  In/out packets (block) -all counters are on 0

      [2.0.1-RELEASE][admin@pfSense.localdomain]/root(1): netstat -I fxp0
      Name              Mtu Network      Address              Ipkts Ierrs Idrop    Opkts Oerrs  Coll
      fxp0              1500 <link#1>00:07:e9:12:80:fe    1646    0    0    1900    0    0
      fxp0              1500 fe80:1::207:e fe80:1::207:e9ff:        0    -    -        2    -    -
      fxp0              1500 192.168.0.0  192.168.0.10          1030    -    -    1860    -    -

      Also , if i change the mac adress to a vlan-interface to anything else than the nic card to wich i asigned the vlan interface it stops responding to icmp , even if i clear arp on all the path , devices and reboot the firewall .
      I put back the initial mac or just leave blank when i configure the vlan interface and it takes the mac from the nic card and it works.</link#1>

      1 Reply Last reply Reply Quote 0
      • B
        blackbrayn
        last edited by

        2.0.1-RELEASE  (amd64)

        RRD Graphs are empty too.

        1 Reply Last reply Reply Quote 0
        • B
          blackbrayn
          last edited by

          Nobody ? no ideea wwhy the rrd Graphs are not working?

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.