Limiters and Bridging
-
let me just try this one more time and even after u fixed the limiter on bridge issue so im dead sure if thats the cause or something else, think that might be the issue only
-
@ermal:
I think that is another issue xibpin.
Please open a new thread.
confirmed, bridging with limiter broken as well as general bridging without limiters also broken, opened a new thread for it
-
tried the 6th November snap and it seems sorted out now, bridging with and without limiters both work fine
-
I can't limit nothing. For me the built on Tue Nov 6 16:28:21 EST 2012 does not react to limiters.
-
u need to creates rules to assign the limiters to clients and also set proper schedules to limiters
-
paste the content of this file
/tmp/rules.limiter
-
I try with and without schedules. I have to reboot the router??
/tmp/rules.limiter:
pipe 1 config bw 450Kb bw 0pipe 2 config bw 150Kb bw 0
pipe 3 config bw 450Kb bw 0
pipe 4 config bw 150Kb bw 0
ps: I have a rule in Lan interface for the limited IP addresses (One IP for now test propose). Like i describe in 3 reply. I will try with schedulers if i miss anything. I have one scheduler with all days, if we need a scheduler then we should have one by default.
-
it seems u have set schedule to none in ur limiter, not ur firewall rule but also noticed there is still a bug in limiter which results in the config showing bw twice, for time being create a schedule for a 24 hour period and assign it to the limtier and ull see the bw will appear only once then try and it should work fine
-
"@xbipin"
No, simple is 2 identical rules, not duplicated. My fault.
/tmp/rules.limiter:
pipe 3 config bw 1000Kbpipe 4 config bw 300Kb
you are right with the last build this work but with scheduler.
-
ermal has put in a patch, the next snap should fix this issue for limiters with schedule set as none