Multi wan - gateway offline
-
it comes back if i enter to the wan interface (the down one) and i just click save and apply changes without made any configuration.
-
Post a screenshot of your gateways and gateway groups.. are both tier 1?
-
YES , tier 1
-
Your WAN is on 10.24.250.x Net & your WAN2 is on 10.24.250.x Net also, are you sure that both Netwworks doesn't overlap ? Which network mask do you have on each WAN ?
Maybe you need to elaborate a bit more about your setup…
-
@ptt:
Your WAN is on 10.24.250.x Net & your WAN2 is on 10.24.250.x Net also, are you sure that both Netwworks doesn't overlap ? Which network mask do you have on each WAN ?
Internal NIC on 10.24.250.x as well. Unless those are small subnet masks, all 3 NICs may have overlapping subnets.
-
it's all /29 subnet mask
-
i have another problem now that i found that squid proxy is not working with multi wan when i enable it and i enable proxy on lan and loopback interfaces :(
-
I have the same problem with multi-WAN switching. Please help.
-
Same problem here.
My ISP disconnects every 24 hours automatically. So WAN1 goes offline, comes back after a few seconds, but PfSense is still saying 'Offline'. I've set the monitor IP to an IP which is definitely pingable.But I have to say I'm using PfSense 2.1-BETA1 (March 28).
Any ideas to solve this??
-
Have same problem here.
When I dissable Gateway Monitoring it works.I have tried a high down ping time, ms and packetloss but with same problem.
I am running 2.0.3