Proto Traffic-Shaping

[zetar]

Hello to all.
Do you know why, some users who have the rule of the traffic-shaping, example.
350Kbit/3000 Kbit, does not work and pass up 7-8 mega upload. (I can not block them)
I find something to read somewhere, not knowing English well I did not find anything relevant.
Thank you.

[Reiner030]

Hi,

best would be that you explain your setup shortly.
My Co-Admin setup traffic shaping and I take only a look onto it yet.
There are rules for outgoing and for incoming traffic seperately created and used.
You can handle the traffic on basis of source-ip, destination-ip, source-lan, destination-lan and other things which can be the problem of your source if he for instant do bittorrent / upload to an filehoster with several IPs/CDN like setup…

Bests

Reiner

EDIT: Perhaps you find something useful in the 2 sticky posts with Tips and Tricks for Traffic Shaping ?
http://forum.pfsense.org/index.php/topic,11986.0.html
http://forum.pfsense.org/index.php/topic,1384.0.html

[zetar]

Thanks for the reply.
My configuration:
Version: 2.0.2
Wan-Lan in bridge No NAT solo Firewall Filtering Packets
I enclose the rest of the screenshots to be more clear.

.png)
.png_thumb)
.png)
.png_thumb)

[Reiner030]

@zetar:

Thanks for the reply.
My configuration:
Version: 2.0.2
Wan-Lan in bridge No NAT solo Firewall Filtering Packets
I enclose the rest of the screenshots to be more clear.

mmh, first 2 pics are to small to see enough but if I'm right the column "queue" is still "none" and has therefore no limiter defined?
=> edit rule => Advanced features => Ackqueue/Queue … there are 2 dropdown boxes for in/out limiter rules.

[zetar]

just what I do not understand the drop-down boxes are empty, is that out.
I will not have anything compiled to create the limiter, I can give an example.
Thank you.

[kyu]

To create limiters http://www.youtube.com/watch?v=Usi195rK35I

This works, but you also have to make sure that your traffic shaper is setup so the traffic in question goes into the correct queue. I once had the above set up, but my VOIP rule was passing everything (including p2p) into VOIP queue.

[zetar]

Thank you.
But it 's just doing what some connected clients can bypass the rule, but I do not know how ..

[kyu]

When they bypass the rule, which Queue does it go into?

[zetar]

Hello.
Now I make it a rule like the one in the screenshot, but I do not know how to set it.
If you tell me how to set it as well. I think they are on the right track, but it still works well.
Thank you.

[zetar]

I enclose the problem.
This user like so many others, I can not limit the bandwidth they entered it in the output.
It comes in at 3.5 Mb and upload inbound up to 7 Mb.
I enclose also its configuration.
If anybody has any idea thanks in advance.