Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Watchguard Firebox XTM 8 Series

    Hardware
    23
    234
    112.9k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • F
      fmertz
      last edited by

      @Eams:

      The LCD seems to be the same as previous models as you say so should be ok.

      There is an arm/disarm led on the front, it hasn't lit up yet.

      There is some useful info there about the FW-8750 of which this board seems to be from:

      Platform
      Chipset: Intel Q35 + ICH9D0

      Eamon

      The LCD code assumes parallel port, so, at a minimum, the sdeclcd driver part of the lcdproc package should run. Might even work, too.

      For the LEDs, the driver code supports the various models based on standard PCI detection of the ICH. We definitely need to add an entry for this ICH9 in the driver code. Once you guys get around to it, can you confirm this is, in fact, an ICH9D0, identified by Vendor x8086, device x2914 (the numbers are listed on page 12 of the "Intel® I/O Controller Hub 9 (ICH9) Family Specification Update")?

      Generally, the LEDs can be wired off of the GPIO device part of this ICH (like in the older models), but, more likely, they are wired off of the SuperIO chip (like the XTM 5). A further screen shot seems to list an ITE8718. This is where the research comes in to identify which line these LEDs are wired off of. I'll be happy to code this in when it is discovered.

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Commence experimental probing!  ;D

        Since you don't have the Watchguard OS we can't look for clues in it's boot messages.

        Not using a Winbond sio chip, interesting.

        You could extract the bios code with flashrom and look at it for hidden menus.

        Steve

        Edit: Looks to be supported by superiotool as well.

        1 Reply Last reply Reply Quote 0
        • E
          Eams
          last edited by

          fmertz:
          Ok, fired up lcdproc, but nothing seems to happen :(

          The boot up screen shows 'Starting package LCDproc…done.'

          Under Status: Services it shows as Stopped. Clicking to start it doesn't change it's status.

          ICH9 Chipset - think you were right, experimental probe..:

          $ pciconf -lc
          hostb0@pci0:0:0:0: class=0x060000 card=0x29b08086 chip=0x29b08086 rev=0x02 hdr=0x00
             cap 09[e0] = vendor (length 11) Intel cap 11 version 1
          pcib1@pci0:0:1:0: class=0x060400 card=0x29b18086 chip=0x29b18086 rev=0x02 hdr=0x01
             cap 0d[88] = PCI Bridge card=0x29b18086
             cap 01[80] = powerspec 3  supports D0 D3  current D0
             cap 05[90] = MSI supports 1 message
             cap 10[a0] = PCI-Express 1 root port max data 128(128) link x4(x16)
          vgapci0@pci0:0:2:0: class=0x030000 card=0x29b28086 chip=0x29b28086 rev=0x02 hdr=0x00
             cap 05[90] = MSI supports 1 message
             cap 01[d0] = powerspec 2  supports D0 D3  current D0
          em4@pci0:0:25:0: class=0x020000 card=0x00008086 chip=0x10bd8086 rev=0x02 hdr=0x00
             cap 01[c8] = powerspec 2  supports D0 D3  current D0
             cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
             cap 13[e0] = PCI Advanced Features: FLR TP
          pcib9@pci0:0:28:0: class=0x060400 card=0x29408086 chip=0x29408086 rev=0x02 hdr=0x01
             cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
             cap 05[80] = MSI supports 1 message
             cap 0d[90] = PCI Bridge card=0x29408086
             cap 01[a0] = powerspec 2  supports D0 D3  current D0
          pcib10@pci0:0:28:1: class=0x060400 card=0x29428086 chip=0x29428086 rev=0x02 hdr=0x01
             cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
             cap 05[80] = MSI supports 1 message
             cap 0d[90] = PCI Bridge card=0x29428086
             cap 01[a0] = powerspec 2  supports D0 D3  current D0
          pcib11@pci0:0:28:2: class=0x060400 card=0x29448086 chip=0x29448086 rev=0x02 hdr=0x01
             cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
             cap 05[80] = MSI supports 1 message
             cap 0d[90] = PCI Bridge card=0x29448086
             cap 01[a0] = powerspec 2  supports D0 D3  current D0
          pcib12@pci0:0:28:3: class=0x060400 card=0x29468086 chip=0x29468086 rev=0x02 hdr=0x01
             cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
             cap 05[80] = MSI supports 1 message
             cap 0d[90] = PCI Bridge card=0x29468086
             cap 01[a0] = powerspec 2  supports D0 D3  current D0
          pcib13@pci0:0:28:4: class=0x060400 card=0x29488086 chip=0x29488086 rev=0x02 hdr=0x01
             cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
             cap 05[80] = MSI supports 1 message
             cap 0d[90] = PCI Bridge card=0x29488086
             cap 01[a0] = powerspec 2  supports D0 D3  current D0
          uhci0@pci0:0:29:0: class=0x0c0300 card=0x29348086 chip=0x29348086 rev=0x02 hdr=0x00
             cap 13[50] = PCI Advanced Features: FLR TP
          uhci1@pci0:0:29:1: class=0x0c0300 card=0x29358086 chip=0x29358086 rev=0x02 hdr=0x00
             cap 13[50] = PCI Advanced Features: FLR TP
          ehci0@pci0:0:29:7: class=0x0c0320 card=0x293a8086 chip=0x293a8086 rev=0x02 hdr=0x00
             cap 01[50] = powerspec 2  supports D0 D3  current D0
             cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
             cap 13[98] = PCI Advanced Features: FLR TP
          pcib14@pci0:0:30:0: class=0x060401 card=0x244e8086 chip=0x244e8086 rev=0x92 hdr=0x01
             cap 0d[50] = PCI Bridge card=0x244e8086
          isab0@pci0:0:31:0: class=0x060100 card=0x29148086 chip=0x29148086 rev=0x02 hdr=0x00
             cap 09[e0] = vendor (length 12) Intel cap 1 version 0
          features: SATA RAID-5, 4 PCI-e x1 slots
          atapci0@pci0:0:31:2: class=0x01018f card=0x29208086 chip=0x29208086 rev=0x02 hdr=0x00
             cap 01[70] = powerspec 3  supports D0 D3  current D0
             cap 13[b0] = PCI Advanced Features: FLR TP
          none0@pci0:0:31:3: class=0x0c0500 card=0x29308086 chip=0x29308086 rev=0x02 hdr=0x00
          atapci1@pci0:0:31:5: class=0x010185 card=0x29268086 chip=0x29268086 rev=0x02 hdr=0x00
             cap 01[70] = powerspec 3  supports D0 D3  current D0
             cap 13[b0] = PCI Advanced Features: FLR TP
          pcib2@pci0:7:0:0: class=0x060400 card=0x862410b5 chip=0x862410b5 rev=0xbb hdr=0x01
             cap 01[40] = powerspec 3  supports D0 D3  current D0
             cap 05[48] = MSI supports 4 messages, 64 bit, vector masks
             cap 10[68] = PCI-Express 2 upstream port max data 128(2048) link x4(x4)
             cap 0d[a4] = PCI Bridge card=0x862410b5
          pcib3@pci0:8:0:0: class=0x060400 card=0x862410b5 chip=0x862410b5 rev=0xbb hdr=0x01
             cap 01[40] = powerspec 3  supports D0 D3  current D0
             cap 05[48] = MSI supports 4 messages, 64 bit, vector masks
             cap 10[68] = PCI-Express 2 downstream port max data 128(2048) link x4(x4)
             cap 0d[a4] = PCI Bridge card=0x862410b5
          pcib4@pci0:8:1:0: class=0x060400 card=0x862410b5 chip=0x862410b5 rev=0xbb hdr=0x01
             cap 01[40] = powerspec 3  supports D0 D3  current D0
             cap 05[48] = MSI supports 4 messages, 64 bit, vector masks
             cap 10[68] = PCI-Express 2 downstream port max data 128(2048) link x1(x4)
             cap 0d[a4] = PCI Bridge card=0x862410b5
          pcib5@pci0:8:4:0: class=0x060400 card=0x862410b5 chip=0x862410b5 rev=0xbb hdr=0x01
             cap 01[40] = powerspec 3  supports D0 D3  current D0
             cap 05[48] = MSI supports 4 messages, 64 bit, vector masks
             cap 10[68] = PCI-Express 2 downstream port max data 128(2048) link x0(x8)
             cap 0d[a4] = PCI Bridge card=0x862410b5
          pcib6@pci0:8:6:0: class=0x060400 card=0x862410b5 chip=0x862410b5 rev=0xbb hdr=0x01
             cap 01[40] = powerspec 3  supports D0 D3  current D0
             cap 05[48] = MSI supports 4 messages, 64 bit, vector masks
             cap 10[68] = PCI-Express 2 downstream port max data 128(2048) link x1(x4)
             cap 0d[a4] = PCI Bridge card=0x862410b5
          pcib7@pci0:8:8:0: class=0x060400 card=0x862410b5 chip=0x862410b5 rev=0xbb hdr=0x01
             cap 01[40] = powerspec 3  supports D0 D3  current D0
             cap 05[48] = MSI supports 4 messages, 64 bit, vector masks
             cap 10[68] = PCI-Express 2 downstream port max data 128(2048) link x1(x4)
             cap 0d[a4] = PCI Bridge card=0x862410b5
          pcib8@pci0:8:9:0: class=0x060400 card=0x862410b5 chip=0x862410b5 rev=0xbb hdr=0x01
             cap 01[40] = powerspec 3  supports D0 D3  current D0
             cap 05[48] = MSI supports 4 messages, 64 bit, vector masks
             cap 10[68] = PCI-Express 2 downstream port max data 128(2048) link x1(x4)
             cap 0d[a4] = PCI Bridge card=0x862410b5
          none1@pci0:14:0:0: class=0x100000 card=0x0001177d chip=0x0010177d rev=0x01 hdr=0x00
             cap 01[40] = powerspec 3  supports D0 D3  current D0
             cap 05[50] = MSI supports 1 message, 64 bit
             cap 10[70] = PCI-Express 1 endpoint max data 128(256) link x4(x4)
          em0@pci0:13:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00
             cap 01[c8] = powerspec 2  supports D0 D3  current D0
             cap 05[d0] = MSI supports 1 message, 64 bit
             cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
             cap 11[a0] = MSI-X supports 3 messages in map 0x1c enabled
          em1@pci0:11:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00
             cap 01[c8] = powerspec 2  supports D0 D3  current D0
             cap 05[d0] = MSI supports 1 message, 64 bit
             cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
             cap 11[a0] = MSI-X supports 3 messages in map 0x1c enabled
          em2@pci0:10:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00
             cap 01[c8] = powerspec 2  supports D0 D3  current D0
             cap 05[d0] = MSI supports 1 message, 64 bit
             cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
             cap 11[a0] = MSI-X supports 3 messages in map 0x1c enabled
          em3@pci0:9:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00
             cap 01[c8] = powerspec 2  supports D0 D3  current D0
             cap 05[d0] = MSI supports 1 message, 64 bit
             cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
             cap 11[a0] = MSI-X supports 3 messages in map 0x1c enabled
          em5@pci0:6:0:0: class=0x020000 card=0x00008086 chip=0x109a8086 rev=0x00 hdr=0x00
             cap 01[c8] = powerspec 2  supports D0 D3  current D0
             cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
             cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
          em6@pci0:5:0:0: class=0x020000 card=0x00008086 chip=0x109a8086 rev=0x00 hdr=0x00
             cap 01[c8] = powerspec 2  supports D0 D3  current D0
             cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
             cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
          em7@pci0:4:0:0: class=0x020000 card=0x00008086 chip=0x109a8086 rev=0x00 hdr=0x00
             cap 01[c8] = powerspec 2  supports D0 D3  current D0
             cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
             cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
          em8@pci0:3:0:0: class=0x020000 card=0x00008086 chip=0x109a8086 rev=0x00 hdr=0x00
             cap 01[c8] = powerspec 2  supports D0 D3  current D0
             cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
             cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
          em9@pci0:2:0:0: class=0x020000 card=0x00008086 chip=0x109a8086 rev=0x00 hdr=0x00
             cap 01[c8] = powerspec 2  supports D0 D3  current D0
             cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
             cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)

          Stephen:
          I managed to upload superiotool to /tmp/ but don't know how to run it :(

          Ditto flashrom!

          Eamon

          1 Reply Last reply Reply Quote 0
          • E
            Eams
            last edited by

            Another experimental probe..

            $ sysctl hw
            hw.machine: i386
            hw.model: Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz
            hw.ncpu: 4
            hw.byteorder: 1234
            hw.physmem: 2120441856
            hw.usermem: 2066382848
            hw.pagesize: 4096
            hw.floatingpoint: 1
            hw.machine_arch: i386
            hw.realmem: 2137784320
            hw.amr.force_sg32: 0
            hw.an.an_cache_iponly: 1
            hw.an.an_cache_mcastonly: 0
            hw.an.an_cache_mode: dbm
            hw.an.an_dump: off
            hw.ata.setmax: 0
            hw.ata.wc: 1
            hw.ata.atapi_dma: 1
            hw.ata.ata_dma_check_80pin: 1
            hw.ata.ata_dma: 1
            hw.ath.bstuck: 4
            hw.ath.txbuf: 200
            hw.ath.rxbuf: 40
            hw.ath.resetcal: 1200
            hw.ath.shortcal: 100
            hw.ath.longcal: 30
            hw.ath.hal.swba_backoff: 0
            hw.ath.hal.sw_brt: 10
            hw.ath.hal.dma_brt: 2
            hw.bce.msi_enable: 1
            hw.bce.tso_enable: 1
            hw.bge.allow_asf: 0
            hw.bt848.slow_msp_audio: -1
            hw.bt848.format: -1
            hw.bt848.reverse_mute: -1
            hw.bt848.tuner: -1
            hw.bt848.card: -1
            hw.bwn.wme: 1
            hw.bwn.usedma: 1
            hw.bwn.hwpctl: 0
            hw.bwn.bluetooth: 1
            hw.bwn.bfp: 0
            hw.cardbus.cis_debug: 0
            hw.cardbus.debug: 0
            hw.cxgb.snd_queue_len: 128
            hw.cxgb.use_16k_clusters: -1
            hw.cxgb.force_fw_update: 0
            hw.cxgb.multiq: 1
            hw.cxgb.ofld_disable: 0
            hw.cxgb.msi_allowed: 2
            hw.cxgb.tx_reclaim_threshold: 32
            hw.cxgb.tx_coalesce_enable_stop: 256
            hw.cxgb.tx_coalesce_enable_start: 512
            hw.cxgb.tx_coalesce_force: 0
            hw.cxgb.txq_mr_size: 1024
            hw.em.eee_setting: 0
            hw.em.rx_process_limit: 100
            hw.em.enable_msix: 1
            hw.em.sbp: 0
            hw.em.smart_pwr_down: 0
            hw.em.txd: 1024
            hw.em.rxd: 1024
            hw.em.rx_abs_int_delay: 66
            hw.em.tx_abs_int_delay: 66
            hw.em.rx_int_delay: 0
            hw.em.tx_int_delay: 66
            hw.igb.rx_process_limit: 100
            hw.igb.num_queues: 0
            hw.igb.header_split: 0
            hw.igb.max_interrupt_rate: 8000
            hw.igb.enable_msix: 1
            hw.igb.enable_aim: 1
            hw.igb.txd: 1024
            hw.igb.rxd: 1024
            hw.firewire.hold_count: 0
            hw.firewire.try_bmr: 1
            hw.firewire.fwmem.speed: 2
            hw.firewire.fwmem.eui64_lo: 0
            hw.firewire.fwmem.eui64_hi: 0
            hw.firewire.phydma_enable: 1
            hw.firewire.nocyclemaster: 0
            hw.firewire.fwe.rx_queue_len: 128
            hw.firewire.fwe.tx_speed: 2
            hw.firewire.fwe.stream_ch: 1
            hw.firewire.sbp.tags: 0
            hw.firewire.sbp.use_doorbell: 0
            hw.firewire.sbp.scan_delay: 500
            hw.firewire.sbp.login_delay: 1000
            hw.firewire.sbp.exclusive_login: 1
            hw.firewire.sbp.max_speed: -1
            hw.firewire.sbp.auto_login: 1
            hw.hifn.maxbatch: 1
            hw.hifn.debug: 0
            hw.malo.txbuf: 256
            hw.malo.rxquota: 256
            hw.malo.rxbuf: 256
            hw.malo.txcoalesce: 8
            hw.malo.pci.msi_disable: 0
            hw.mfi.max_cmds: 128
            hw.mfi.event_class: 0
            hw.mfi.event_locale: 65535
            hw.mwl.rxdmalow: 3
            hw.mwl.rxquota: 640
            hw.mwl.txcoalesce: 8
            hw.mwl.txbuf: 256
            hw.mwl.rxbuf: 640
            hw.mwl.rxdesc: 256
            hw.pccard.cis_debug: 0
            hw.pccard.debug: 0
            hw.cbb.debug: 0
            hw.cbb.start_32_io: 4096
            hw.cbb.start_16_io: 256
            hw.cbb.start_memory: 2281701376
            hw.pcic.pd6722_vsense: 1
            hw.pcic.intr_mask: 57016
            hw.pci.usb_early_takeover: 1
            hw.pci.honor_msi_blacklist: 1
            hw.pci.enable_msix: 1
            hw.pci.enable_msi: 1
            hw.pci.do_power_resume: 1
            hw.pci.do_power_nodriver: 0
            hw.pci.enable_io_modes: 1
            hw.pci.default_vgapci_unit: -1
            hw.pci.host_mem_start: 2147483648
            hw.pci.mcfg: 1
            hw.pci.irq_override_mask: 57080
            hw.safe.rngmaxalarm: 8
            hw.safe.rngbufsize: 16
            hw.safe.rnginterval: 1
            hw.syscons.kbd_debug: 1
            hw.syscons.kbd_reboot: 0
            hw.syscons.bell: 1
            hw.syscons.saver.keybonly: 1
            hw.syscons.sc_no_suspend_vtswitch: 0
            hw.usb.no_boot_wait: 0
            hw.usb.debug: 0
            hw.usb.usb_lang_mask: 255
            hw.usb.usb_lang_id: 9
            hw.usb.template: 0
            hw.usb.power_timeout: 30
            hw.usb.uath.regdomain: 0
            hw.usb.uath.countrycode: 0
            hw.usb.urtw.preamble_mode: 2
            hw.usb.urtw.debug: 0
            hw.usb.ucom.cons_baud: 9600
            hw.usb.ucom.cons_unit: -1
            hw.wi.debug: 0
            hw.wi.txerate: 0
            hw.intr_storm_threshold: 1000
            hw.pagesizes: 4096 0
            hw.availpages: 517686
            hw.bus.devctl_queue: 1000
            hw.bus.devctl_disable: 0
            hw.kbd.keymap_restrict_change: 0
            hw.nve_pollinterval: 0
            hw.busdma.total_bpages: 128
            hw.busdma.zone0.total_bpages: 128
            hw.busdma.zone0.free_bpages: 128
            hw.busdma.zone0.reserved_bpages: 0
            hw.busdma.zone0.active_bpages: 0
            hw.busdma.zone0.total_bounced: 0
            hw.busdma.zone0.total_deferred: 0
            hw.busdma.zone0.lowaddr: 0xffffffff
            hw.busdma.zone0.alignment: 4096
            hw.clockrate: 2660
            hw.via_feature_xcrypt: 0
            hw.via_feature_rng: 0
            hw.instruction_sse: 1
            hw.apic.enable_extint: 0
            hw.mca.erratum383: 0
            hw.mca.amd10h_L1TP: 1
            hw.mca.enabled: 1
            hw.mca.count: 0
            hw.mca.interval: 3600
            hw.mca.force_scan: 0
            hw.acpi.supported_sleep_state: S1 S4 S5
            hw.acpi.power_button_state: S5
            hw.acpi.sleep_button_state: S1
            hw.acpi.lid_switch_state: NONE
            hw.acpi.standby_state: S1
            hw.acpi.suspend_state: NONE
            hw.acpi.sleep_delay: 1
            hw.acpi.s4bios: 0
            hw.acpi.verbose: 0
            hw.acpi.disable_on_reboot: 0
            hw.acpi.handle_reboot: 0
            hw.acpi.reset_video: 0
            hw.acpi.cpu.cx_lowest: C1

            Eamon

            1 Reply Last reply Reply Quote 0
            • E
              Eams
              last edited by

              Another..

              $ sysctl dev.cpu
              dev.cpu.0.%desc: ACPI CPU
              dev.cpu.0.%driver: cpu
              dev.cpu.0.%location: handle=_PR_.P001
              dev.cpu.0.%pnpinfo: _HID=none UID=0
              dev.cpu.0.%parent: acpi0
              dev.cpu.0.cx_supported: C1/0
              dev.cpu.0.cx_lowest: C1
              dev.cpu.0.cx_usage: 100.00% last 5000us
              dev.cpu.0.freq: 330
              dev.cpu.0.freq_levels: 2646/-1 2315/-1 1984/-1 1653/-1 1323/-1 992/-1 661/-1 330/-1
              dev.cpu.1.%desc: ACPI CPU
              dev.cpu.1.%driver: cpu
              dev.cpu.1.%location: handle=_PR              .P002
              dev.cpu.1.%pnpinfo: _HID=none UID=0
              dev.cpu.1.%parent: acpi0
              dev.cpu.1.cx_supported: C1/0
              dev.cpu.1.cx_lowest: C1
              dev.cpu.1.cx_usage: 100.00% last 5000us
              dev.cpu.2.%desc: ACPI CPU
              dev.cpu.2.%driver: cpu
              dev.cpu.2.%location: handle=_PR              .P003
              dev.cpu.2.%pnpinfo: _HID=none UID=0
              dev.cpu.2.%parent: acpi0
              dev.cpu.2.cx_supported: C1/0
              dev.cpu.2.cx_lowest: C1
              dev.cpu.2.cx_usage: 100.00% last 5000us
              dev.cpu.3.%desc: ACPI CPU
              dev.cpu.3.%driver: cpu
              dev.cpu.3.%location: handle=_PR              .P004
              dev.cpu.3.%pnpinfo: _HID=none _UID=0
              dev.cpu.3.%parent: acpi0
              dev.cpu.3.cx_supported: C1/0
              dev.cpu.3.cx_lowest: C1
              dev.cpu.3.cx_usage: 100.00% last 5000us

              Eamon

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                To use either of those tools you have to install the FreeBSD package properly, so:

                As you are running NanoBD first remount the filesystem read-write

                [2.0.3-RELEASE][root@pfsense.fire.box]/root(1): /etc/rc.conf_mount_rw

                Then add the package. You have to specify the complete path beacsue FreeBSD 8.1 is now quite old

                [2.0.3-RELEASE][root@pfsense.fire.box]/root(2): pkg_add -r ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/ports/i386/packages-8.1-release/Latest/superiotool.tbz
Fetching ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/ports/i386/packages-8.1-release/Latest/superiotool.tbz... Done.

                same for flashrom

                [2.0.3-RELEASE][root@pfsense.fire.box]/root(3): pkg_add -r ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/ports/i386/packages-8.1-release/Latest/flashrom.tbz
Fetching ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/ports/i386/packages-8.1-release/Latest/flashrom.tbz... Done.
Fetching ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/ports/i386/packages-8.1-release/All/libpci-3.1.7_1.tbz... Done.

                Then remount the filesystem read-only again

                [2.0.3-RELEASE][root@pfsense.fire.box]/root(4): /etc/rc.conf_mount_ro

                Finally issue a rehash to re-index the new files so FreeBSD knows where to find them

                [2.0.3-RELEASE][root@pfsense.fire.box]/root(5): rehash

                Now you run the tools.  :)

                After you install the lcdproc-dev package via the pfSense GUI you have to configure the various parameters before it will run and then start the service manually the first time in Status: Services:

                Steve

                1 Reply Last reply Reply Quote 0
                • F
                  fmertz
                  last edited by

                  @Eams:

                  isab0@pci0:0:31:0: class=0x060100 card=0x29148086 chip=0x29148086 rev=0x02 hdr=0x00

                  Yep, confirmed ICH9D0. Dom 0, bus 0, device 31, function 0 is the L(ow)P(in)C(ount) device. We can use it to identify the exact ICH model number.

                  1 Reply Last reply Reply Quote 0
                  • E
                    Eams
                    last edited by

                    I had lcdproc loaded - removed and installed lcdproc-dev - selected WatchGuard Firebox with SDEC (x86only) - see attached pics.

                    Looks like powerd is doing it's job running the cpu at 330Mhz - fans however haven't slowed down any though :(

                    Superiotool probe..:
                    $ superiotool -d
                    superiotool r
                    Found ITE IT8718F (id=0x8718, rev=0x4) at 0x2e
                    Register dump:
                    idx 20 21 22 23 24 2b
                    val 87 18 04 10 00 00
                    def 87 18 01 00 00 00
                    LDN 0x00 (Floppy)
                    idx 30 60 61 70 74 f0 f1
                    val 00 00 00 00 04 00 00
                    def 00 03 f0 06 02 00 00
                    LDN 0x01 (COM1)
                    idx 30 60 61 70 f0 f1 f2 f3
                    val 00 03 f8 04 00 50 00 7f
                    def 00 03 f8 04 00 50 00 7f
                    LDN 0x02 (COM2)
                    idx 30 60 61 70 f0 f1 f2 f3
                    val 01 02 f8 03 00 50 00 7f
                    def 00 02 f8 03 00 50 00 7f
                    LDN 0x03 (Parallel port)
                    idx 30 60 61 62 63 70 74 f0
                    val 01 03 78 00 00 07 04 08
                    def 00 03 78 07 78 07 03 03
                    LDN 0x04 (Environment controller)
                    idx 30 60 61 62 63 70 f0 f1  f2 f3 f4 f5 f6
                    val 01 0a 10 0a 00 00 80 00  00 00 a0 00 ff
                    def 00 02 90 02 30 09 00 00  00 00 00 NA NA
                    LDN 0x05 (Keyboard)
                    idx 30 60 61 62 63 70 71 f0
                    val 01 00 60 00 64 01 02 00
                    def 01 00 60 00 64 01 02 00
                    LDN 0x06 (Mouse)
                    idx 30 70 71 f0
                    val 01 0c 02 00
                    def 00 0c 02 00
                    LDN 0x07 (GPIO)
                    idx 25 26 27 28 29 2a 2c 60  61 62 63 64 65 70 71 72  73 74 b0 b1 b2 b3 b4 b5  b8 b9 ba bb bc bd c0 c1  c2 c3 c4 c5 c8 c9 ca cb  cc e0 e1 e2 e3 e4 e5 e6  e7 f0 f1 f2 f3 f4 f5 f6  f7 f8 f9 fa fb fc fd fe  ff
                    val 41 d3 00 00 00 20 1f 00  00 0a 20 0a 30 00 00 00  00 00 00 00 00 00 00 00  40 00 00 00 00 00 40 d3  00 40 00 00 40 d0 00 40  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  00 00 00 00 00 bc 00 00  00
                    def 01 00 00 40 00 00 00 00  00 00 00 00 00 00 00 20  38 00 00 00 00 00 00 00  00 00 00 00 00 00 01 00  00 40 00 00 01 00 00 40  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  00 00 00 00 00 NA 00 00  00
                    LDN 0x0a (Consumer IR)
                    idx 30 60 61 70 f0
                    val 00 00 00 00 06
                    def 00 03 10 0b 00

                    Hope that is of some use ;D

                    Haven't managed to get flashrom to run  ???

                    Eamon

                    IMG_20130517_004538.jpg
                    IMG_20130517_004538.jpg_thumb
                    IMG_20130517_005003.jpg
                    IMG_20130517_005003.jpg_thumb

                    1 Reply Last reply Reply Quote 0
                    • F
                      fmertz
                      last edited by

                      @Eams:

                      Selected WatchGuard Firebox with SDEC (x86only) - see attached pics.

                      That was an easy win. Good to see, though. Have you tried the buttons? Best guess, they sort of work, but are not mapped correctly…

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        What happens when you try to run flashrom?

                        Steve

                        1 Reply Last reply Reply Quote 0
                        • E
                          Eams
                          last edited by

                          fmertz:
                          I've tried the buttons, but with the display being so faint, it's hard to see properly. I'll try and have a further play tonight.

                          Steve:
                          With flashrom I'm getting the error:
                          /usr/local/bin/flashrom: Exec format error. Binary file not executable.

                          Eamon

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            Ah, that's interesting. Looking back through the boot logs you posted earlier it looks like you were running 64bit, is that still the case?
                            That explains the wrong binary error.

                            If that is the case:
                            Remount the filesystem and remove flashrom with

                            pkg_delete flashrom

                            Then add the correct version

                            pkg_add -r ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/ports/amd64/packages-8.1-release/Latest/flashrom.tbz

                            See how that goes, I'm not entirely sure what will happen. You may need to manually remove libpci-3.1.7_1 it may just be overwritten.  :-\

                            Interesting that superiotool worked fine and that the sdeclcd driver worked.

                            Steve

                            1 Reply Last reply Reply Quote 0
                            • E
                              Eams
                              last edited by

                              Removed flashrom and libpci-3.1.7_1 but still got the same /usr/local/bin/flashrom: Exec format error. Binary file not executable error.

                              Just checked and I'm running the nano_vga i386 build ::)

                              Removed both mentioned above and applied the i386 packages - flashrom now works :)

                              $ flashrom -V
flashrom v0.9.2-r1001 on FreeBSD 8.1-RELEASE-p13 (i386), built with libpci 3.1.7, GCC 4.2.1 20070719  [FreeBSD]
flashrom is free software, get the source code at http://www.flashrom.org

Initializing internal programmer
No coreboot table found.
dmidecode execution unsucessfull - continuing without DMI info
Found ITE Super I/O, id 8718
Found chipset "Intel ICH9DO", enabling flash write... 
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1

Root Complex Register Block address = 0xfed1c000
GCS = 0x464: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI)
Top Swap : not enabled
SPIBAR = 0xfed1c000 + 0x3800
0x04: 0x6008 (HSFS)
FLOCKDN 0, FDV 1, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0
0x50: 0x0000ffff (FRAP)
BMWAG 0, BMRAG 0, BRWA 255, BRRA 255
0x54: 0x00000000 (FREG0)
0x58: 0x01020003 (FREG1)
0x5C: 0x00000fff (FREG2)
0x60: 0x00020001 (FREG3)
0x64: 0x00000fff (FREG4)
0x74: 0x00000000 (PR0)
0x78: 0x00000000 (PR1)
0x7C: 0x00000000 (PR2)
0x80: 0x00000000 (PR3)
0x84: 0x00000000 (PR4)
0x90: 0x00414004 (SSFS, SSFC)
0x94: 0x5006     (PREOP)
0x96: 0x463b     (OPTYPE)
0x98: 0x05d80302 (OPMENU)
0x9C: 0xc79f0190 (OPMENU+4)
0xA0: 0x00000000 (BBAR)
0xB0: 0x00004000 (FDOC)
Programming OPCODES... 
program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
done
SPI Read Configuration: prefetching disabled, caching enabled, OK.
This chipset supports the following protocols: FWH,SPI.
No IT87* serial flash segment enabled.
Calibrating delay loop... 1995M loops per second, 10 myus = 11 us, 100 myus = 102 us, 1000 myus = 1002 us, 10000 myus = 10006 us, OK.
Probing for AMD Am29F010A/B, 128 KB: skipped.
Probing for AMD Am29F002(N)BB, 256 KB: skipped.
Probing for AMD Am29F002(N)BT, 256 KB: skipped.
Probing for AMD Am29F016D, 2048 KB: skipped.
Probing for AMD Am29F040B, 512 KB: skipped.
Probing for AMD Am29F080B, 1024 KB: skipped.
Probing for AMD Am29LV040B, 512 KB: skipped.
Probing for AMD Am29LV081B, 1024 KB: skipped.
Probing for ASD AE49F2008, 256 KB: skipped.
Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT29C512, 64 KB: skipped.
Probing for Atmel AT29C010A, 128 KB: skipped.
Probing for Atmel AT29C020, 256 KB: skipped.
Probing for Atmel AT29C040A, 512 KB: skipped.
Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT49BV512, 64 KB: skipped.
Probing for Atmel AT49F002(N), 256 KB: skipped.
Probing for Atmel AT49F002(N)T, 256 KB: skipped.
Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for AMIC A29002B, 256 KB: skipped.
Probing for AMIC A29002T, 256 KB: skipped.
Probing for AMIC A29040B, 512 KB: skipped.
Probing for AMIC A49LF040A, 512 KB: skipped.
Probing for EMST F49B002UA, 256 KB: skipped.
Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN29F010, 128 KB: skipped.
Probing for EON EN29F002(A)(N)B, 256 KB: skipped.
Probing for EON EN29F002(A)(N)T, 256 KB: skipped.
Probing for Fujitsu MBM29F004BC, 512 KB: skipped.
Probing for Fujitsu MBM29F004TC, 512 KB: skipped.
Probing for Fujitsu MBM29F400BC, 512 KB: skipped.
Probing for Fujitsu MBM29F400TC, 512 KB: skipped.
Probing for Intel 28F001BX-B, 128 KB: skipped.
Probing for Intel 28F001BX-T, 128 KB: skipped.
Probing for Intel 28F004S5, 512 KB: skipped.
Probing for Intel 28F004BV/BE-B, 512 KB: skipped.
Probing for Intel 28F004BV/BE-T, 512 KB: skipped.
Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped.
Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped.
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x20, id2 0x59, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x38, id2 0x30, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX29F001B, 128 KB: skipped.
Probing for Macronix MX29F001T, 128 KB: skipped.
Probing for Macronix MX29F002B, 256 KB: skipped.
Probing for Macronix MX29F002T, 256 KB: skipped.
Probing for Macronix MX29LV040, 512 KB: skipped.
Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for PMC Pm29F002T, 256 KB: skipped.
Probing for PMC Pm29F002B, 256 KB: skipped.
Probing for PMC Pm39LV010, 128 KB: skipped.
Probing for PMC Pm39LV020, 256 KB: skipped.
Probing for PMC Pm39LV040, 512 KB: skipped.
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x2e, id2 0xc7, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x20, id2 0x59, id1 is normal flash content, id2 is normal flash content
Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x38, id2 0x30, id1 is normal flash content, id2 is normal flash content
Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Chip status register is 00
Chip status register: Block Protect Write Disable (BPL) is not set
Chip status register: Auto Address Increment Programming (AAI) is not set
Chip status register: Bit 5 / Block Protect 3 (BP3) is not set
Chip status register: Bit 4 / Block Protect 2 (BP2) is not set
Chip status register: Bit 3 / Block Protect 1 (BP1) is not set
Chip status register: Bit 2 / Block Protect 0 (BP0) is not set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP/BUSY) is not set
Resulting block protection : none
Found chip "SST SST25VF016B" (2048 KB, SPI) at physical address 0xffe00000.
Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0x41
Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0x41
Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for SST SST28SF040A, 512 KB: skipped.
Probing for SST SST29EE010, 128 KB: skipped.
Probing for SST SST29LE010, 128 KB: skipped.
Probing for SST SST29EE020A, 256 KB: skipped.
Probing for SST SST29LE020, 256 KB: skipped.
Probing for SST SST39SF512, 64 KB: skipped.
Probing for SST SST39SF010A, 128 KB: skipped.
Probing for SST SST39SF020A, 256 KB: skipped.
Probing for SST SST39SF040, 512 KB: skipped.
Probing for SST SST39VF512, 64 KB: skipped.
Probing for SST SST39VF010, 128 KB: skipped.
Probing for SST SST39VF020, 256 KB: skipped.
Probing for SST SST39VF040, 512 KB: skipped.
Probing for SST SST39VF080, 1024 KB: skipped.
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x2e, id2 0xc7, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xbb, id2 0x5d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x20, id2 0x59, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x20, id2 0x59, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x38, id2 0x30, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x38, id2 0x30, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020, 256 KB: skipped.
Probing for SST SST49LF020A, 256 KB: skipped.
Probing for SST SST49LF040, 512 KB: skipped.
Probing for SST SST49LF040B, 512 KB: skipped.
Probing for SST SST49LF080A, 1024 KB: skipped.
Probing for SST SST49LF160C, 2048 KB: skipped.
Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID.
Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID.
Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID.
Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST M29F002B, 256 KB: skipped.
Probing for ST M29F002T/NT, 256 KB: skipped.
Probing for ST M29F040B, 512 KB: skipped.
Probing for ST M29F400BT, 512 KB: skipped.
Probing for ST M29W010B, 128 KB: skipped.
Probing for ST M29W040B, 512 KB: skipped.
Probing for ST M29W512B, 64 KB: skipped.
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x20, id2 0x59, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x20, id2 0x59, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x38, id2 0x30, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x38, id2 0x30, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x2e, id2 0xc7, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x20, id2 0x59, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x38, id2 0x30, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 KB: skipped.
Probing for SyncMOS S29C31004T, 512 KB: skipped.
Probing for SyncMOS S29C51001T, 128 KB: skipped.
Probing for SyncMOS S29C51002T, 256 KB: skipped.
Probing for SyncMOS S29C51004T, 512 KB: skipped.
Probing for TI TMS29F002RB, 256 KB: skipped.
Probing for TI TMS29F002RT, 256 KB: skipped.
Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W29C011, 128 KB: skipped.
Probing for Winbond W29C020C, 256 KB: skipped.
Probing for Winbond W29C040P, 512 KB: skipped.
Probing for Winbond W29EE011, 128 KB: skipped.
Probing for Winbond W39V040A, 512 KB: skipped.
Probing for Winbond W39V040B, 512 KB: skipped.
Probing for Winbond W39V040C, 512 KB: skipped.
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x20, id2 0x59, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: skipped.
Probing for Winbond W49F002U, 256 KB: skipped.
Probing for Winbond W49V002A, 256 KB: skipped.
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x2e, id2 0xc7, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x38, id2 0x30, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x59, id1 is normal flash content, id2 is normal flash content
Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xbf, id2 0x41
===

                              Eamon

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                Ok, wonder why it didn't work the first time? Hmm.
                                Never mind, now you can read out the bios file and open it with a bios editor to see if it holds any secrets. It probably won't to be honest. Only the X-Core box had the ability to set the arm/disarm led status from the bios. It will let you see how easy it would be to unlock the bios menus. On the XTM5 it was simply a matter of changing to default access level but it was high risk as you've probably read in the xtm5 thread.

                                Steve

                                1 Reply Last reply Reply Quote 0
                                • E
                                  Eams
                                  last edited by

                                  Yeah.. I think I might have downloaded the 64bit package when I was in fact running the 32bit nanobsd build - having tried so many different builds :P

                                  Ok I've got the BIOS saved to disk, what do I use to open it and have a look, modbin6 from the freedos image?

                                  Eamon

                                  1 Reply Last reply Reply Quote 0
                                  • stephenw10S
                                    stephenw10 Netgate Administrator
                                    last edited by

                                    No, modbin6 only works for Award bioses.
                                    You have to use an AMI bios editor, there are several, none of them work very well!  ::)
                                    There is a patched version of AMIBCP that sort of works. MMTool can extract/replace bios modules.
                                    None of them are too easy to get hold of I recal.

                                    Steve

                                    1 Reply Last reply Reply Quote 0
                                    • E
                                      Eams
                                      last edited by

                                      Ah ok, I found this… www dot bios-mods dot com/downloads/

                                      Eamon

                                      Edit: Hyperlink removed.

                                      1 Reply Last reply Reply Quote 0
                                      • stephenw10S
                                        stephenw10 Netgate Administrator
                                        last edited by

                                        Yeah that looks good. 3.13 is the version I have.
                                        Perhaps not a great plan to link there from the forum. Don't want to bring down any heat on the dev team.  :)

                                        Steve

                                        1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          I checked the XTM5 bios and it reports:

                                          AMIBIOS 080015  02/03/10(C)2006

                                          So that looks like it's bios core version 8.00.15 which is the same as yours (see your first screenshot). The only difference is that yours is twice the size.
                                          I found a copy of amibcp 3.51, which is the most recent I could find, and it still couldn't open your rom file. All those amibcp programs are dated 2008 though so none are terribly new. There are v4 available but I'm lead to believe they are for much newer efi bioses.
                                          Edit: Yep V4.53 can't open any files I have here.

                                          Steve

                                          1 Reply Last reply Reply Quote 0
                                          • E
                                            Eams
                                            last edited by

                                            I'm thinking the bios dump is somehow wrong.

                                            Had a bit of a dig around the Watchguard support site and I found this on the XTM 8

                                            Hardware Specifications
                                                                            XTM 8 Series
                                            Processor                  2 .66 GHz Quad Core
                                            Memory: Flash            1 GB
                                            Memory: RAM            2 GB

                                            Now that's either the BIOS flash memory or the compact flash card.

                                            Eamon

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post