Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Watchguard Firebox XTM 8 Series

    Hardware
    23
    234
    113.0k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • E
      Eams
      last edited by

      Removed flashrom and libpci-3.1.7_1 but still got the same /usr/local/bin/flashrom: Exec format error. Binary file not executable error.

      Just checked and I'm running the nano_vga i386 build ::)

      Removed both mentioned above and applied the i386 packages - flashrom now works :)

      $ flashrom -V
flashrom v0.9.2-r1001 on FreeBSD 8.1-RELEASE-p13 (i386), built with libpci 3.1.7, GCC 4.2.1 20070719  [FreeBSD]
flashrom is free software, get the source code at http://www.flashrom.org

Initializing internal programmer
No coreboot table found.
dmidecode execution unsucessfull - continuing without DMI info
Found ITE Super I/O, id 8718
Found chipset "Intel ICH9DO", enabling flash write... 
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1

Root Complex Register Block address = 0xfed1c000
GCS = 0x464: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI)
Top Swap : not enabled
SPIBAR = 0xfed1c000 + 0x3800
0x04: 0x6008 (HSFS)
FLOCKDN 0, FDV 1, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0
0x50: 0x0000ffff (FRAP)
BMWAG 0, BMRAG 0, BRWA 255, BRRA 255
0x54: 0x00000000 (FREG0)
0x58: 0x01020003 (FREG1)
0x5C: 0x00000fff (FREG2)
0x60: 0x00020001 (FREG3)
0x64: 0x00000fff (FREG4)
0x74: 0x00000000 (PR0)
0x78: 0x00000000 (PR1)
0x7C: 0x00000000 (PR2)
0x80: 0x00000000 (PR3)
0x84: 0x00000000 (PR4)
0x90: 0x00414004 (SSFS, SSFC)
0x94: 0x5006     (PREOP)
0x96: 0x463b     (OPTYPE)
0x98: 0x05d80302 (OPMENU)
0x9C: 0xc79f0190 (OPMENU+4)
0xA0: 0x00000000 (BBAR)
0xB0: 0x00004000 (FDOC)
Programming OPCODES... 
program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
done
SPI Read Configuration: prefetching disabled, caching enabled, OK.
This chipset supports the following protocols: FWH,SPI.
No IT87* serial flash segment enabled.
Calibrating delay loop... 1995M loops per second, 10 myus = 11 us, 100 myus = 102 us, 1000 myus = 1002 us, 10000 myus = 10006 us, OK.
Probing for AMD Am29F010A/B, 128 KB: skipped.
Probing for AMD Am29F002(N)BB, 256 KB: skipped.
Probing for AMD Am29F002(N)BT, 256 KB: skipped.
Probing for AMD Am29F016D, 2048 KB: skipped.
Probing for AMD Am29F040B, 512 KB: skipped.
Probing for AMD Am29F080B, 1024 KB: skipped.
Probing for AMD Am29LV040B, 512 KB: skipped.
Probing for AMD Am29LV081B, 1024 KB: skipped.
Probing for ASD AE49F2008, 256 KB: skipped.
Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT29C512, 64 KB: skipped.
Probing for Atmel AT29C010A, 128 KB: skipped.
Probing for Atmel AT29C020, 256 KB: skipped.
Probing for Atmel AT29C040A, 512 KB: skipped.
Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Atmel AT49BV512, 64 KB: skipped.
Probing for Atmel AT49F002(N), 256 KB: skipped.
Probing for Atmel AT49F002(N)T, 256 KB: skipped.
Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for AMIC A29002B, 256 KB: skipped.
Probing for AMIC A29002T, 256 KB: skipped.
Probing for AMIC A29040B, 512 KB: skipped.
Probing for AMIC A49LF040A, 512 KB: skipped.
Probing for EMST F49B002UA, 256 KB: skipped.
Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Eon EN29F010, 128 KB: skipped.
Probing for EON EN29F002(A)(N)B, 256 KB: skipped.
Probing for EON EN29F002(A)(N)T, 256 KB: skipped.
Probing for Fujitsu MBM29F004BC, 512 KB: skipped.
Probing for Fujitsu MBM29F004TC, 512 KB: skipped.
Probing for Fujitsu MBM29F400BC, 512 KB: skipped.
Probing for Fujitsu MBM29F400TC, 512 KB: skipped.
Probing for Intel 28F001BX-B, 128 KB: skipped.
Probing for Intel 28F001BX-T, 128 KB: skipped.
Probing for Intel 28F004S5, 512 KB: skipped.
Probing for Intel 28F004BV/BE-B, 512 KB: skipped.
Probing for Intel 28F004BV/BE-T, 512 KB: skipped.
Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped.
Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped.
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x20, id2 0x59, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x38, id2 0x30, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix MX29F001B, 128 KB: skipped.
Probing for Macronix MX29F001T, 128 KB: skipped.
Probing for Macronix MX29F002B, 256 KB: skipped.
Probing for Macronix MX29F002T, 256 KB: skipped.
Probing for Macronix MX29LV040, 512 KB: skipped.
Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for PMC Pm29F002T, 256 KB: skipped.
Probing for PMC Pm29F002B, 256 KB: skipped.
Probing for PMC Pm39LV010, 128 KB: skipped.
Probing for PMC Pm39LV020, 256 KB: skipped.
Probing for PMC Pm39LV040, 512 KB: skipped.
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x2e, id2 0xc7, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x20, id2 0x59, id1 is normal flash content, id2 is normal flash content
Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x38, id2 0x30, id1 is normal flash content, id2 is normal flash content
Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Chip status register is 00
Chip status register: Block Protect Write Disable (BPL) is not set
Chip status register: Auto Address Increment Programming (AAI) is not set
Chip status register: Bit 5 / Block Protect 3 (BP3) is not set
Chip status register: Bit 4 / Block Protect 2 (BP2) is not set
Chip status register: Bit 3 / Block Protect 1 (BP1) is not set
Chip status register: Bit 2 / Block Protect 0 (BP0) is not set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP/BUSY) is not set
Resulting block protection : none
Found chip "SST SST25VF016B" (2048 KB, SPI) at physical address 0xffe00000.
Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0x41
Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0x41
Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for SST SST28SF040A, 512 KB: skipped.
Probing for SST SST29EE010, 128 KB: skipped.
Probing for SST SST29LE010, 128 KB: skipped.
Probing for SST SST29EE020A, 256 KB: skipped.
Probing for SST SST29LE020, 256 KB: skipped.
Probing for SST SST39SF512, 64 KB: skipped.
Probing for SST SST39SF010A, 128 KB: skipped.
Probing for SST SST39SF020A, 256 KB: skipped.
Probing for SST SST39SF040, 512 KB: skipped.
Probing for SST SST39VF512, 64 KB: skipped.
Probing for SST SST39VF010, 128 KB: skipped.
Probing for SST SST39VF020, 256 KB: skipped.
Probing for SST SST39VF040, 512 KB: skipped.
Probing for SST SST39VF080, 1024 KB: skipped.
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x2e, id2 0xc7, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xbb, id2 0x5d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x20, id2 0x59, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x20, id2 0x59, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x38, id2 0x30, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x38, id2 0x30, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020, 256 KB: skipped.
Probing for SST SST49LF020A, 256 KB: skipped.
Probing for SST SST49LF040, 512 KB: skipped.
Probing for SST SST49LF040B, 512 KB: skipped.
Probing for SST SST49LF080A, 1024 KB: skipped.
Probing for SST SST49LF160C, 2048 KB: skipped.
Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID.
Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID.
Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID.
Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST M29F002B, 256 KB: skipped.
Probing for ST M29F002T/NT, 256 KB: skipped.
Probing for ST M29F040B, 512 KB: skipped.
Probing for ST M29F400BT, 512 KB: skipped.
Probing for ST M29W010B, 128 KB: skipped.
Probing for ST M29W040B, 512 KB: skipped.
Probing for ST M29W512B, 64 KB: skipped.
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x20, id2 0x59, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x20, id2 0x59, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x38, id2 0x30, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x38, id2 0x30, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x2e, id2 0xc7, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x20, id2 0x59, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x38, id2 0x30, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 KB: skipped.
Probing for SyncMOS S29C31004T, 512 KB: skipped.
Probing for SyncMOS S29C51001T, 128 KB: skipped.
Probing for SyncMOS S29C51002T, 256 KB: skipped.
Probing for SyncMOS S29C51004T, 512 KB: skipped.
Probing for TI TMS29F002RB, 256 KB: skipped.
Probing for TI TMS29F002RT, 256 KB: skipped.
Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Winbond W29C011, 128 KB: skipped.
Probing for Winbond W29C020C, 256 KB: skipped.
Probing for Winbond W29C040P, 512 KB: skipped.
Probing for Winbond W29EE011, 128 KB: skipped.
Probing for Winbond W39V040A, 512 KB: skipped.
Probing for Winbond W39V040B, 512 KB: skipped.
Probing for Winbond W39V040C, 512 KB: skipped.
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x20, id2 0x59, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: skipped.
Probing for Winbond W49F002U, 256 KB: skipped.
Probing for Winbond W49V002A, 256 KB: skipped.
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x2e, id2 0xc7, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x38, id2 0x30, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x59, id1 is normal flash content, id2 is normal flash content
Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xbf, id2 0x41
===

      Eamon

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Ok, wonder why it didn't work the first time? Hmm.
        Never mind, now you can read out the bios file and open it with a bios editor to see if it holds any secrets. It probably won't to be honest. Only the X-Core box had the ability to set the arm/disarm led status from the bios. It will let you see how easy it would be to unlock the bios menus. On the XTM5 it was simply a matter of changing to default access level but it was high risk as you've probably read in the xtm5 thread.

        Steve

        1 Reply Last reply Reply Quote 0
        • E
          Eams
          last edited by

          Yeah.. I think I might have downloaded the 64bit package when I was in fact running the 32bit nanobsd build - having tried so many different builds :P

          Ok I've got the BIOS saved to disk, what do I use to open it and have a look, modbin6 from the freedos image?

          Eamon

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            No, modbin6 only works for Award bioses.
            You have to use an AMI bios editor, there are several, none of them work very well!  ::)
            There is a patched version of AMIBCP that sort of works. MMTool can extract/replace bios modules.
            None of them are too easy to get hold of I recal.

            Steve

            1 Reply Last reply Reply Quote 0
            • E
              Eams
              last edited by

              Ah ok, I found this… www dot bios-mods dot com/downloads/

              Eamon

              Edit: Hyperlink removed.

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                Yeah that looks good. 3.13 is the version I have.
                Perhaps not a great plan to link there from the forum. Don't want to bring down any heat on the dev team.  :)

                Steve

                1 Reply Last reply Reply Quote 0
                • stephenw10S
                  stephenw10 Netgate Administrator
                  last edited by

                  I checked the XTM5 bios and it reports:

                  AMIBIOS 080015  02/03/10(C)2006

                  So that looks like it's bios core version 8.00.15 which is the same as yours (see your first screenshot). The only difference is that yours is twice the size.
                  I found a copy of amibcp 3.51, which is the most recent I could find, and it still couldn't open your rom file. All those amibcp programs are dated 2008 though so none are terribly new. There are v4 available but I'm lead to believe they are for much newer efi bioses.
                  Edit: Yep V4.53 can't open any files I have here.

                  Steve

                  1 Reply Last reply Reply Quote 0
                  • E
                    Eams
                    last edited by

                    I'm thinking the bios dump is somehow wrong.

                    Had a bit of a dig around the Watchguard support site and I found this on the XTM 8

                    Hardware Specifications
                                                    XTM 8 Series
                    Processor                  2 .66 GHz Quad Core
                    Memory: Flash            1 GB
                    Memory: RAM            2 GB

                    Now that's either the BIOS flash memory or the compact flash card.

                    Eamon

                    1 Reply Last reply Reply Quote 0
                    • stephenw10S
                      stephenw10 Netgate Administrator
                      last edited by

                      It's the CF that's 1GB. A 1GB BIOS would be huge!  ;)

                      I agree the most likely thing seems to be that the image is corrupt. That could have happened during extraction, a flashrom problem, or during transfer or something else.

                      Steve

                      1 Reply Last reply Reply Quote 0
                      • E
                        Eams
                        last edited by

                        Haha!! that's what I get for looking at the specs when I'm half awake!!

                        Ok so how do I get the BIOS saved properly? I did flashrom -r file.bin then I downloaded it via the pfSense webgui.

                        Is there a better way?

                        Eamon

                        1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          Hmm. Ok. Sometimes your web browser can try to interpret files.
                          When extracting the bios from the XTM5 I used a filename that was filename.rom and I transfered it via SCP using WinSCP.

                          To check the file integrity you can generate an MD5 sum for it on the box and then on your windows machine or where ever you put it.

                          [2.1-BETA1][root@pfsense.localdomain]/tmp(3): flashrom -r backup.rom
flashrom v0.9.5.2-r1515 on FreeBSD 8.3-RELEASE-p8 (i386), built with libpci 3.1.9, GCC 4.2.1 20070719  [FreeBSD], little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
Found chipset "Intel ICH7/ICH7R". Enabling flash write... OK.
Found ST flash chip "M25P80" (1024 kB, SPI) at physical address 0xfff00000.
Reading flash... done.
[2.1-BETA1][root@pfsense.localdomain]/tmp(4): md5 backup.rom
MD5 (backup.rom) = fcefa2906d7c3179264a8528ba0a7cea

                          I use WinMD5 to check it after transfer.

                          Steve

                          1 Reply Last reply Reply Quote 0
                          • E
                            Eams
                            last edited by

                            Ok so as it stands my XTM 8 is locked in a never ending bios reboot due to a "CMOS Checksum Bad" error :(

                            How this happened is as follows:

                            I had flashed the Lanner FW-8750 firmware to the board - flashrom0.9.2 gave an error and to get on irc.

                            I spoke with idwer/stefan and a couple of other flashrom devs who were kind enough to compile the lastest flashrom (0.9.6.2 - I think) for pfsense 2.0.3 (many thanks guys).

                            However before that had come through, I flashed back the back up Bios - got the same error - rebooted and the XTM 8 was back to how it was from the factory ie bios locked but working.

                            I then followed the Lanner reps advice and used AFUDOS to flash the Lanner bios, which reported it had flashed successfully! and thats how I got to the never ending bios reboot :(

                            So at the moment I'm waiting on a SPI programming board to arrive from the US so I can flash the bios via the SPI header.

                            Eamon

                            IMG_20130524_192911.jpg
                            IMG_20130524_192911.jpg_thumb
                            AMIBIOS-flashed.jpg
                            AMIBIOS-flashed.jpg_thumb
                            AMIBIOS-Error.jpg
                            AMIBIOS-Error.jpg_thumb

                            1 Reply Last reply Reply Quote 0
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by

                              Yikes, that's a message you never want to see.  :o

                              Although the xtm8 is based on the 8750 is not an 8750, there are hardware differences that may mean the standard BIOS cannot work. Though I can't think what they might be.

                              Failed CMOS checksum is a fairly standard error after updating the BIOS. I take it you've tried clearing the cmos or trying to load the default values. I'm sure the flashrom guys will have discussed that.

                              You can always try the 4 resistors like I did.  ;)

                              Steve

                              1 Reply Last reply Reply Quote 0
                              • E
                                Eams
                                last edited by

                                No it's not the message I wanted to see either!

                                The bios they sent was after I had supplied the serial number and board model/version so one would assume it would match!

                                Yeah I've cleared the cmos, it won't allow me to get into the bios which is the worst part :(

                                I'm avoiding the 4 resistors and going for a proper SPI programmer ;)

                                Eamon

                                1 Reply Last reply Reply Quote 0
                                • stephenw10S
                                  stephenw10 Netgate Administrator
                                  last edited by

                                  More patient than me.  :)

                                  1 Reply Last reply Reply Quote 0
                                  • E
                                    Eams
                                    last edited by

                                    Not really, I just hate soldering ;)

                                    1 Reply Last reply Reply Quote 0
                                    • E
                                      Eams
                                      last edited by

                                      Looks like I'll have to go the soldering route :(

                                      I've tried the BlackCat SPI programmer but it just won't recognise the rom even though it supports it :(

                                      Eamon

                                      1 Reply Last reply Reply Quote 0
                                      • stephenw10S
                                        stephenw10 Netgate Administrator
                                        last edited by

                                        Is the ROM chip powered? How does it connect?

                                        1 Reply Last reply Reply Quote 0
                                        • E
                                          Eams
                                          last edited by

                                          The rom chip is powered when the unit is in standby.

                                          The SPI programmer connects directly to the SPI-ROM header on the motherboard. I've tried it every which way but no joy :(

                                          Eamon

                                          1 Reply Last reply Reply Quote 0
                                          • stephenw10S
                                            stephenw10 Netgate Administrator
                                            last edited by

                                            Well that's quite disappointing. A long wait for no result.  :(
                                            Good luck with the soldering. :)

                                            Steve

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post