Em0 is down

  • I have two connection em0 and pppoe0 ,below is the welcome screen on my pfsence

    WAN (wan)                 -> em0        -> x.x.x.x
     LAN (lan)                 -> fxp0       ->
     10WAN (opt1)              -> pppoe0     -> x.x.x.x (PPPoE)

    but Dash board says that WAN CONNECTION IS DOWN

    Interface shows that no carrier available

    Status: Interfaces

    WAN interface (em0)
    Status no carrier
    MAC address 0000000000000
    IP address x.x.x.x
    Subnet mask
    Gateway WANGW x.x.x.x
    ISP DNS servers
    Media autoselect
    In/out packets 0/0 (0 bytes/67 KB)
    In/out packets (pass) 0/960 (0 bytes/67 KB)
    In/out packets (block) 0/0 (0 bytes/0 bytes)
    In/out errors 0/0
    Collisions 0

    I don't know what is the problem for this . I run the command to up interface

    ifconfig em0 up

    Nothing is happen is it is any configuration problem is happened .Both interface has worked fine before two days .Any suggestion is appreciable

  • That means it's not plugged into anything, or not plugged in with the right kind of cable (xover or not), or bad cable. Doesn't have link.

Log in to reply