Configure DSL on 2nd WAN port {PPPOE/PPTP/etc}
-
Hi,
I have a the follow ISP setups
1. Cable
2. DSLI want WAN = Cable and OPT1 = DSL
When I go to configure OPT1 I cannot access the PPPOE setup.
Please advise…
Tim
-
Use WAN as PPPOE and OPT1 as cable.
PPPOE on something else than WAN is not yet availlable. -
Wow really? :(
I waited almost a year already.
I didn't want the DSL to be the primary WAN by default.
Only to be used for failover, or for specific traffic. Guess I
will have to wait.Ok thanks…
Tim
-
Go for it! I bet patches are accepted…Sorry, brain f***.
Clients only have a default gateway, not … I was way off track! -
I didn't want the DSL to be the primary WAN by default.
Only to be used for failover, or for specific traffic. Guess I
will have to wait.You dont need to have WAN as default.
Default is what you define as default in the firewall rules on LAN-tab.
Just set your OPT1 as default… -
I didn't want the DSL to be the primary WAN by default.
Only to be used for failover, or for specific traffic. Guess I
will have to wait.You dont need to have WAN as default.
Default is what you define as default in the firewall rules on LAN-tab.
Just set your OPT1 as default…Exactly, the WAN is only the default and not easily changed for traffic originating from the firewall itself (which in a normal policy routing configuration isn't much - DNS forwarder if you use it, and NTP if you use servers on the Internet).
