Shell Route silme komutu nedir?



  • Arkadaşlar,

    Shell Route eklemiştim, şimdi webconfigurator e erişemiyorum. Silme komutunu verebilir misiniz?



  • FreeBSD Set a Default Route / Gateway
    by NIXCRAFT on JANUARY 13, 2008 · 7 COMMENTS· LAST UPDATED OCTOBER 31, 2008
    in FREEBSD, NETWORKING, TROUBLESHOOTING

    Q. How do I modify or set a default route for my FreeBSD server? How do I make default route configuration persistent?

    A. The route command is used under FreeBSD to manually manipulate the network routing tables. It provides six commands:
    => add : Add a route.

    => flush :Remove all routes.

    => delete : Delete a specific route.

    => change : Change aspects of a route (such as its gateway).

    => get : Lookup and display the route for a destination.

    => monitor : Continuously report any changes to the routing information base, routing lookup misses, or suspected network partitionings.

    Task: View / Display FreeBSD Routing Table

    Use netstat command with -r option:
    $ netstat -r
    $ netstat -rn

    Output:

    Routing tables
    Internet:
    Destination        Gateway            Flags    Refs      Use  Netif Expire
    default            61.221.xx.yy      UGS        0      247    em1
    10                10.10.110.5        UGS        0      50    em0
    10.10.110/26      link#1            UC          0        0    em0
    10.10.110.5        00:1b:0d:e6:58:40  UHLW        2        0    em0  1145
    61.221.xx.yy/29    link#2            UC          0        0    em1
    61.221.xx.yy      00:1b:0d:e6:57:c0  UHLW        2        0    em1  1055
    61.221.xx/24      link#2            UC          0        0    em1
    127.0.0.1          127.0.0.1          UH          0        0    lo0
    The first two line displays default routes.

    Task: FreeBSD Set a default route

    All network packets that cannot be sent according to the previous entries of the routing table are sent through the following default gateway:

    route add default 192.168.1.254

    How do I save routing information to a configuration file?

    If you reboot FreeBSD box, the routing configuration will be lost i.e. the routing information will not persist. You need to edit /etc/rc.conf file to set defaultroute:

    vi /etc/rc.conf

    Set default route by editing defaultrouter variable:
    defaultrouter="192.168.1.254"

    Save and close the file.

    Task: Start and Stop FreeBSD Configured Interfaces

    To apply changes to a configuration file, you need to stop and restart the corresponding FreeBSD networking interface. The following command will also update routing information:

    /etc/rc.d/netif restart

    /etc/rc.d/routing stop

    /etc/rc.d/routing start