DNS Forwarder in the last snapshots

jimp

Seeing the same thing over here, for me it was 8/15 and 8/16 Snapshot.
I have not checked snapshot after 16th as put in DNS server manually.

So 8/15 was OK and 8/16 broke it? Or did 8/15 break it (and if so, what snap were you on before 8/15?)

mdima

Hello,
unfortunately I can't help on this because I was in vacation for a week, then when I updated I found out this problem… :S

Michele

val

15th snapshot starts to break it, before that I was on 14th snapshots.

my connection is using pppoe a vdsl2
for me DNS starts to break on this snapshot
pfSense-2.1-RC1-amd64-20130815-0311

jimp

If you look in /var/etc/ - do you have any "nameserver_*" files there? (Where * = your interface name)

jimp

This may have been caused by https://github.com/pfsense/pfsense/commit/1702a838194d2f4ffaa99359f888a42b0832472a which was accidentally put on 2.1 when it was meant for master (2.2) only, it will be gone from the next snapshot so try it again once that shows up later tonight.

val

@jimp:

If you look in /var/etc/ - do you have any "nameserver_*" files there? (Where * = your interface name)

there is, anything else you need?

val

@jimp:

This may have been caused by https://github.com/pfsense/pfsense/commit/1702a838194d2f4ffaa99359f888a42b0832472a which was accidentally put on 2.1 when it was meant for master (2.2) only, it will be gone from the next snapshot so try it again once that shows up later tonight.

Righto, thank you jimp

Val

wbond

@jimp:

This may have been caused by https://github.com/pfsense/pfsense/commit/1702a838194d2f4ffaa99359f888a42b0832472a which was accidentally put on 2.1 when it was meant for master (2.2) only, it will be gone from the next snapshot so try it again once that shows up later tonight.

Jim,

I think you were right, just updated to 2.1-RC1 (amd64) built on Mon Aug 19 16:16:39 EDT 2013 and it seems to be fixed. My nameserver_pppoe0 was empty before the update and now contains the DNS servers. I removed them from the System: General Setup screen and it's working again.

thanks,
Bill

val

@wbond:

@jimp:

This may have been caused by https://github.com/pfsense/pfsense/commit/1702a838194d2f4ffaa99359f888a42b0832472a which was accidentally put on 2.1 when it was meant for master (2.2) only, it will be gone from the next snapshot so try it again once that shows up later tonight.

Jim,

I think you were right, just updated to 2.1-RC1 (amd64) built on Mon Aug 19 16:16:39 EDT 2013 and it seems to be fixed. My nameserver_pppoe0 was empty before the update and now contains the DNS servers. I removed them from the System: General Setup screen and it's working again.

thanks,
Bill

Thx for the heads up, I am just doing the update now.

mdima

Hello,
I confirm, on the very last snapshot (built on Mon Aug 19 16:16:08 EDT 2013) the DNSes got from the PPP connection are successfully used, the file /var/etc/nameserver_pppoe0 contains the DNS, and everything works great again…

Thanks a lot Jim!!

Michele