Thanks for the utterly broken 2.1 update.
-
So I had the same problem as the OP. Here is some more information. Sorry I don't have more–I had to get it up and running and I didn't have a whole lot of time to troubleshoot, but here is what happened:
I have a Firebox that is booting from a 2GB CF card that was originally flashed with a 2.0.1 image. I performed an update through the GUI. It went successfully (supposedly). When I rebooted, the box would not respond on the network. I attached a serial cable and found that all 3 of my interfaces were not showing their IPs. I tried setting my LAN interface using the serial console--and it showed up, but it still would not respond on the network. So, I used the menu option to "restore an earlier configuration" figuring that maybe the config got botched somehow during the upgrade. After the reboot, no dice--same thing--none of the interfaces showed their IP addresses. I then rebooted it from the previous slice, and 2.0.1 booted up perfectly with my config working. So, I ran the update to 2.1 again, and got the exact same results--the interfaces had no IPs on them. So, I then used the console to reset everything to defaults, and set the config from scratch on 2.1 and it worked just fine.
The config on that box was NOT complicated--had 1 firewall rule, a WAN interface set to DHCP, and two LAN interfaces bridged eith DHCP server running on the LAN side.
Hopefully that gives someone an idea of what could be happening.
I do have other boxes like this to upgrade--if someone wants me to collect more information, just tell me what you want me to collect so that if it happens again I will collect the information and then proceed to get my box working!
Dimitri Rodis
Integrita Systems LLC
http://www.integritasystems.com -
Which firebox? How much RAM?
Key to this seems to be the backing up of RRD files in combination with the update/reinstalling packages. If you have either a lot of interfaces or a lot of data you may run out of space. How far back does your RRD data go?http://forum.pfsense.org/index.php/topic,66571.msg364374.html#msg364374
Steve