Fxp0 timed out during installation

[T5000]

Hi,

i was building a new system for pfsense with a mini itx board and an 3x Intel 82541PI GigaLAN extension module.

Now my problem:

During installation of pfsense (after selecting 1 for deault boot) i geht this message:

fxp0: fxp_minibus_readreg: timed out
fxp0: fxp_minibus_readreg: timed out
fxp0: fxp_minibus_readreg: timed out
fxp0: fxp_minibus_readreg: timed out
fxp0: fxp_minibus_readreg: timed out
fxp0: fxp_minibus_readreg: timed out
fxp0: fxp_minibus_readreg: timed out
fxp0: fxp_minibus_readreg: timed out
fxp0: fxp_minibus_readreg: timed out
fxp0: fxp_minibus_readreg: timed out
fxp0: fxp_minibus_readreg: timed out
fxp0: fxp_minibus_readreg: timed out
fxp0: fxp_minibus_readreg: timed out
fxp0: fxp_minibus_readreg: timed out
minibus0: <mii bus="">on fxp0
fxp0: fxp_minibus_readreg: timed out
fxp0: fxp_minibus_readreg: timed out
ukphy0: <generic ieee="" 802.3u="" media="" interface="">PHY 0 on minibus0
fxp0: fxp_minibus_writereg: timed out
fxp0: fxp_minibus_readreg: timed out
fxp0: fxp_minibus_readreg: timed out
fxp0: fxp_minibus_readreg: timed out
fxp0: fxp_minibus_readreg: timed out
ukphy0: no media present
ifmedia_set: no match for 0x0/0xfffffff
panic: ifmedia_set
cpuid = 0
KDB: enter: panic
thread pid 0 tid 100000
Stopped at kdb_enter+0x3b: movq     $0,0xc06cb2(%rip)
db></generic></mii> 

and then noting. Hardware is an Intel 82541PI GigaLAN with 3 Gbit Ports on it.

Any ideas ? found nothing here or with google.

Thanks!

[stephenw10]

fxp is an Intel 10/100 NIC. What hardware are you using?

Steve