Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Lightsquid broken after last upgrade

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    27 Posts 12 Posters 17.8k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • L
      linuxpro
      last edited by

      @dvserg:

      I have success installation on two my 1.2RC3 (VMWare).
      Please send to my mail or PM file '/tmp/pkg_mgr_Lightsquid.log'

      
Load config file /usr/local/etc/lightsquid/lightsquid.cfg
Update config: cfgpath="/usr/local/etc/lightsquid"
Update config: logpath="/var/squid/log"
Update config: tplpath="/usr/local/www/lightsquid/tpl"
Update config: langpath="/usr/local/share/lightsquid/lang"
Update config: reportpath="/var/lightsquid/report"
Update config: ip2namepath="/usr/local/libexec/lightsquid"
Update config: lang="eng";
Update config: templatename="novosea";
Update config: ip2name="ip";
Update config: skipurl="zzz\.zzz"
Update config: squidlogtype=0
Update config: barcolor="red";
Save config file /usr/local/etc/lightsquid/lightsquid.cfg ()
ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1
ls_setup_cron: found cron task with name=lightsquid_parser on [].
ls_setup_cron: found cron task with key=/lightparser.pl on [10].
ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'
ls_setup_cron: end
ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1
ls_setup_cron: found cron task with name=lightsquid_squid_rotate on [].
ls_setup_cron: found cron task with key=/squid -k rotate on [10].
ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null'
ls_setup_cron: end
Load config file /usr/local/etc/lightsquid/lightsquid.cfg
Update config: cfgpath="/usr/local/etc/lightsquid"
Update config: logpath="/var/squid/log"
Update config: tplpath="/usr/local/www/lightsquid/tpl"
Update config: langpath="/usr/local/share/lightsquid/lang"
Update config: reportpath="/var/lightsquid/report"
Update config: ip2namepath="/usr/local/libexec/lightsquid"
Update config: lang="eng";
Update config: templatename="novosea";
Update config: ip2name="ip";
Update config: skipurl="zzz\.zzz"
Update config: squidlogtype=0
Update config: barcolor="red";
Save config file /usr/local/etc/lightsquid/lightsquid.cfg ()
ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1
ls_setup_cron: found cron task with name=lightsquid_parser on [].
ls_setup_cron: found cron task with key=/lightparser.pl on [10].
ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'
ls_setup_cron: end
ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1
ls_setup_cron: found cron task with name=lightsquid_squid_rotate on [].
ls_setup_cron: found cron task with key=/squid -k rotate on [10].
ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null'
ls_setup_cron: end
Load config file /usr/local/etc/lightsquid/lightsquid.cfg
Update config: cfgpath="/usr/local/etc/lightsquid"
Update config: logpath="/var/squid/log"
Update config: tplpath="/usr/local/www/lightsquid/tpl"
Update config: langpath="/usr/local/share/lightsquid/lang"
Update config: reportpath="/var/lightsquid/report"
Update config: ip2namepath="/usr/local/libexec/lightsquid"
Update config: lang="eng";
Update config: templatename="novosea";
Update config: ip2name="ip";
Update config: skipurl="zzz\.zzz"
Update config: squidlogtype=0
Update config: barcolor="yellow";
Save config file /usr/local/etc/lightsquid/lightsquid.cfg ()
ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1
ls_setup_cron: found cron task with name=lightsquid_parser on [].
ls_setup_cron: found cron task with key=/lightparser.pl on [10].
ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'
ls_setup_cron: end
ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1
ls_setup_cron: found cron task with name=lightsquid_squid_rotate on [].
ls_setup_cron: found cron task with key=/squid -k rotate on [10].
ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null'
ls_setup_cron: end
refresh_full: start
refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl'
refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl access.log.0'
refresh_full: stop
refresh_now: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'
Load config file /usr/local/etc/lightsquid/lightsquid.cfg
Update config: cfgpath="/usr/local/etc/lightsquid"
Update config: logpath="/var/squid/log"
Update config: tplpath="/usr/local/www/lightsquid/tpl"
Update config: langpath="/usr/local/share/lightsquid/lang"
Update config: reportpath="/var/lightsquid/report"
Update config: ip2namepath="/usr/local/libexec/lightsquid"
Update config: lang="eng";
Update config: templatename="novosea";
Update config: ip2name="squidauth";
Update config: skipurl="zzz\.zzz"
Update config: squidlogtype=0
Update config: barcolor="yellow";
Save config file /usr/local/etc/lightsquid/lightsquid.cfg ()
ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1
ls_setup_cron: found cron task with name=lightsquid_parser on [].
ls_setup_cron: found cron task with key=/lightparser.pl on [10].
ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'
ls_setup_cron: end
ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1
ls_setup_cron: found cron task with name=lightsquid_squid_rotate on [].
ls_setup_cron: found cron task with key=/squid -k rotate on [10].
ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null'
ls_setup_cron: end
Load config file /usr/local/etc/lightsquid/lightsquid.cfg
Update config: cfgpath="/usr/local/etc/lightsquid"
Update config: logpath="/var/squid/log"
Update config: tplpath="/usr/local/www/lightsquid/tpl"
Update config: langpath="/usr/local/share/lightsquid/lang"
Update config: reportpath="/var/lightsquid/report"
Update config: ip2namepath="/usr/local/libexec/lightsquid"
Update config: lang="eng";
Update config: templatename="novosea";
Update config: ip2name="demo";
Update config: skipurl="zzz\.zzz"
Update config: squidlogtype=0
Update config: barcolor="yellow";
Save config file /usr/local/etc/lightsquid/lightsquid.cfg ()
ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1
ls_setup_cron: found cron task with name=lightsquid_parser on [].
ls_setup_cron: found cron task with key=/lightparser.pl on [10].
ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'
ls_setup_cron: end
ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1
ls_setup_cron: found cron task with name=lightsquid_squid_rotate on [].
ls_setup_cron: found cron task with key=/squid -k rotate on [10].
ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null'
ls_setup_cron: end
Load config file /usr/local/etc/lightsquid/lightsquid.cfg
Update config: cfgpath="/usr/local/etc/lightsquid"
Update config: logpath="/var/squid/log"
Update config: tplpath="/usr/local/www/lightsquid/tpl"
Update config: langpath="/usr/local/share/lightsquid/lang"
Update config: reportpath="/var/lightsquid/report"
Update config: ip2namepath="/usr/local/libexec/lightsquid"
Update config: lang="eng";
Update config: templatename="novosea";
Update config: ip2name="ip";
Update config: skipurl="zzz\.zzz"
Update config: squidlogtype=0
Update config: barcolor="red";
Save config file /usr/local/etc/lightsquid/lightsquid.cfg ()
ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1
ls_setup_cron: found cron task with name=lightsquid_parser on [].
ls_setup_cron: found cron task with key=/lightparser.pl on [10].
ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'
ls_setup_cron: end
ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1
ls_setup_cron: found cron task with name=lightsquid_squid_rotate on [].
ls_setup_cron: found cron task with key=/squid -k rotate on [10].
ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null'
ls_setup_cron: end
refresh_now: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'
refresh_full: start
refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl'
refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl access.log.0'
refresh_full: stop
Load config file /usr/local/etc/lightsquid/lightsquid.cfg
Update config: cfgpath="/usr/local/etc/lightsquid"
Update config: logpath="/var/squid/log"
Update config: tplpath="/usr/local/www/lightsquid/tpl"
Update config: langpath="/usr/local/share/lightsquid/lang"
Update config: reportpath="/var/lightsquid/report"
Update config: ip2namepath="/usr/local/libexec/lightsquid"
Update config: lang="eng";
Update config: templatename="novosea";
Update config: ip2name="ip";
Update config: skipurl="zzz\.zzz"
Update config: squidlogtype=0
Update config: barcolor="red";
Save config file /usr/local/etc/lightsquid/lightsquid.cfg ()
ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1
ls_setup_cron: found cron task with name=lightsquid_parser on [].
ls_setup_cron: found cron task with key=/lightparser.pl on [10].
ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'
ls_setup_cron: end
ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1
ls_setup_cron: found cron task with name=lightsquid_squid_rotate on [].
ls_setup_cron: found cron task with key=/squid -k rotate on [10].
ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null'
ls_setup_cron: end
refresh_now: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'
refresh_full: start
refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl'
refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl access.log.0'
refresh_full: stop
Load config file /usr/local/etc/lightsquid/lightsquid.cfg
Update config: cfgpath="/usr/local/etc/lightsquid"
Update config: logpath="/var/squid/log"
Update config: tplpath="/usr/local/www/lightsquid/tpl"
Update config: langpath="/usr/local/share/lightsquid/lang"
Update config: reportpath="/var/lightsquid/report"
Update config: ip2namepath="/usr/local/libexec/lightsquid"
Update config: lang="eng";
Update config: templatename="novosea";
Update config: ip2name="ip";
Update config: skipurl="zzz\.zzz"
Update config: squidlogtype=0
Update config: barcolor="red";
Save config file /usr/local/etc/lightsquid/lightsquid.cfg ()
ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1
ls_setup_cron: found cron task with name=lightsquid_parser on [].
ls_setup_cron: found cron task with key=/lightparser.pl on [10].
ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'
ls_setup_cron: end
ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1
ls_setup_cron: found cron task with name=lightsquid_squid_rotate on [].
ls_setup_cron: found cron task with key=/squid -k rotate on [10].
ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null'
ls_setup_cron: end
Load config file /usr/local/etc/lightsquid/lightsquid.cfg
Update config: cfgpath="/usr/local/etc/lightsquid"
Update config: logpath="/var/squid/log"
Update config: tplpath="/usr/local/www/lightsquid/tpl"
Update config: langpath="/usr/local/share/lightsquid/lang"
Update config: reportpath="/var/lightsquid/report"
Update config: ip2namepath="/usr/local/libexec/lightsquid"
Update config: lang="eng";
Update config: templatename="novosea";
Update config: ip2name="ip";
Update config: skipurl="zzz\.zzz"
Update config: squidlogtype=0
Update config: barcolor="red";
Save config file /usr/local/etc/lightsquid/lightsquid.cfg ()
ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1
ls_setup_cron: found cron task with name=lightsquid_parser on [].
ls_setup_cron: found cron task with key=/lightparser.pl on [10].
ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'
ls_setup_cron: end
ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1
ls_setup_cron: found cron task with name=lightsquid_squid_rotate on [].
ls_setup_cron: found cron task with key=/squid -k rotate on [10].
ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null'
ls_setup_cron: end
refresh_full: start
refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl'
refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl access.log.0'
refresh_full: stop
refresh_now: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'
refresh_full: start
refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl'
refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl access.log.0'
refresh_full: stop
Load config file /usr/local/etc/lightsquid/lightsquid.cfg
Update config: cfgpath="/usr/local/etc/lightsquid"
Update config: logpath="/var/squid/log"
Update config: tplpath="/usr/local/www/lightsquid/tpl"
Update config: langpath="/usr/local/share/lightsquid/lang"
Update config: reportpath="/var/lightsquid/report"
Update config: ip2namepath="/usr/local/libexec/lightsquid"
Update config: lang="eng";
Update config: templatename="novosea";
Update config: ip2name="ip";
Update config: skipurl="zzz\.zzz"
Update config: squidlogtype=0
Update config: barcolor="red";
Save config file /usr/local/etc/lightsquid/lightsquid.cfg ()
ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1
ls_setup_cron: found cron task with name=lightsquid_parser on [].
ls_setup_cron: found cron task with key=/lightparser.pl on [10].
ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'
ls_setup_cron: end
ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1
ls_setup_cron: found cron task with name=lightsquid_squid_rotate on [].
ls_setup_cron: found cron task with key=/squid -k rotate on [10].
ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null'
ls_setup_cron: end
Load config file /usr/local/etc/lightsquid/lightsquid.cfg
Update config: cfgpath="/usr/local/etc/lightsquid"
Update config: logpath="/var/squid/log"
Update config: tplpath="/usr/local/www/lightsquid/tpl"
Update config: langpath="/usr/local/share/lightsquid/lang"
Update config: reportpath="/var/lightsquid/report"
Update config: ip2namepath="/usr/local/libexec/lightsquid"
Update config: lang="eng";
Update config: templatename="novopf";
Update config: ip2name="ip";
Update config: skipurl="zzz\.zzz"
Update config: squidlogtype=0
Update config: barcolor="green";
Save config file /usr/local/etc/lightsquid/lightsquid.cfg ()
ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1
ls_setup_cron: found cron task with name=lightsquid_parser on [].
ls_setup_cron: found cron task with key=/lightparser.pl on [10].
ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'
ls_setup_cron: end
ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1
ls_setup_cron: found cron task with name=lightsquid_squid_rotate on [].
ls_setup_cron: found cron task with key=/squid -k rotate on [10].
ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null'
ls_setup_cron: end
refresh_now: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'
refresh_full: start
refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl'
refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl access.log.0'
refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl access.log.1'
refresh_full: stop
refresh_now: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'
      1 Reply Last reply Reply Quote 0
      • L
        linuxpro
        last edited by

        i from china.
        english is poor.

        my lightsquid conf

        #!/usr/bin/perl
#
# LightSquid Project (c) 2004-2005 Sergey Erokhin aka ESL
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# detail see in gnugpl.txt

# -------------------- GLOBAL VARIABLES  ---------------------------

#path to additional `cfg` files
$cfgpath = "/usr/local/etc/lightsquid";
#path to `tpl` folder
$tplpath = "/usr/local/www/lightsquid/tpl";
#path to `lang` folder
$langpath = "/usr/local/share/lightsquid/lang";
#path to `report` folder
$reportpath = "/var/lightsquid/report";
#path to access.log
$logpath = "/var/squid/log";
#path to `ip2name` folder
$ip2namepath = "/usr/local/libexec/lightsquid";

#path to `lockfile` ;-)
$lockpath            =$reportpath;

#if lockfile older $maxlocktime second, remove old lock file.
$maxlocktime	     = 30*60;

#if 1 - lightparser generate some statistic
$debug               = 0;  
#if 1 - lightparser generate skip details, 2 ..., 3 ..., ....
$debug2              = 0;

# -------------------- LightParser VARIABLES  ---------------------------
#squid log type
#if native squid format (default squid, see in doc) - must be 0
#if EmulateHttpdLog ON - set 1
#digit - for speed optimization
#try it set to 1 if parser generate warning
#
#see also month2dec below !!!!
#
$squidlogtype = 0;

#if you want skip some sites from stat, example our local www server
#WARNING !!!, don't leave this variable empty !!!
#example, if you want skip LOCAL site, put it here
#$skipurl             = "zdd.com|192\.168\.1\.|cnn.com";
$skipurl = "zzz\.zzz";

#define sobroutine file for convertion from IP into name
#if you want skip some ip from log - return "SKIP THIS IP" ;-)
#detail see in ip2name folder, 

$ip2name = "ip";;

#use for convert from Text to Dec convertion if EmualteHttpdLog format !!!!
#fix it if need 
%month2dec = ( Jan => 1, Feb => 2, Mar => 3, Apr => 4, May => 5,Jun => 6,
               Jul => 7, Aug => 8, Sep => 9, Oct => 10, Nov => 11,Dec => 12);

# -------------------- Common (Parser & Web) VARIABLES  ----------------------
#create & use time report statistic (logsize = logsize*2) ;-))
$timereport          = 1;

# -------------------- WEB VARIABLES  ----------------------------------------

#language
#see `lang` folder (avaible: bg,eng,fr,hu,it,pt_br,ru,sp)
$lang = "eng";;

#html template name
#see template folder `tpl/$templatename/`
$templatename = "novopf";;
#$templatename        ="ric";
#$templatename        ="base.css";

#define type of decimal output
#fine  123456789 -> 123,456,789
#class 123456789 ->       117.7 G
$DecOutType="class";

# define delimiter for thousands (in `fine` mode)
# = " " -> 12 345 678 
# = "," -> 12,345,678
# = ""  ->   12345678
$decdelimiter        = " ";

#if you dont need Group mode, do =0
$showgrouplink	     = 1;

#if not zero, groups look like "01\. Group1", if zero - "Group1"
$showgroupid         = 1;

#if you dont need oversize report , do =0
$showoversizelink    = 1;

#show how many data user send to internet
$showputpost         = 0;
#if putpost higer this variable (in percent), highlight it
$putpostwarninglevel =15;

#use or not .realname files 
#.realname contain pair userid -> Full User Name
$userealname         = 1;

#if url size exceed $bigfilelimit - add this file into report
$bigfilelimit        = 2*1024*1024; 

#user maximum size per day limit (oversize)
$perusertrafficlimit = 10*1024*1024;

# weekend display mode
# both - select sunday & monday
# monday - only monday 
$weekendmode="both";

#how many site show in TopSites report
$topsiteslimit       = 500;

#how many site show in user time report
$usertimelimit       = 200;

#if you want user traffic GRAPHIC report, set it in 1
#WARNING !!!, need libgd, GD.PM & other external modules !!!
#please run check-setup.pl for check library !!!!
$graphreport         = 1;

#higest value on graph report
# for user month report (0.05*(...) = 50mb)
$graphmaxuser=0.05*(1024*1024*1024);
# for all user month report (1.05*(...) = 1 Gb)
$graphmaxall =0.80*(1024*1024*1024);

#color scheme for GRAPHICs, avaible "orange","blue","green","yellow","brown","red"
$barcolor = "green";;

#-------------------------------------------------------------------------- Group support
#

sub CreateGroupFile($) {
  my $path=shift;

  open Fi,"<$cfgpath/group.cfg";
  open Fo,">$path/.group";
  while (<fi>) {
    print Fo $_;
  }
  close Fo;
  close Fi;
}

#-------------------------------------------------------------------------- RealName support
#

sub CreateRealnameFile($) {
  my $path=shift;

  open Fi,"<$cfgpath/realname.cfg";
  open Fo,">$path/.realname";
  while (<fi>) {
    print Fo $_;
  }
  close Fo;
  close Fi;
}</fi></fi>

        111.PNG
        111.PNG_thumb

        1 Reply Last reply Reply Quote 0
        • L
          linuxpro
          last edited by

          After testing, by default, it is no problem.

          However, I use a custom district. Squid on to the / cache inside.

          I changed the conf Lightsquid, there have also been 500 that error message.

          Not solve the current swap.

          1 Reply Last reply Reply Quote 0
          • T
            trentster
            last edited by

            I also am having this problem on a fresh install of 1.2-RC3.

            It seems that the report is not even being generated by lightsquid when I click "refresh now" or "refresh all"

            Also get the error message "500 - internal server error"

            Any Ideas on a fix, as we use this a lot for reports for our clients.

            Thanks

            Mark

            1 Reply Last reply Reply Quote 0
            • D
              dvserg
              last edited by

              Looking this ticket - problem here:

              http://cvstrac.pfsense.com/tktview?tn=1536

              Lighttpd error log after adding perl-5.8.8_1 to system
              /libexec/ld-elf.so.1: /usr/local/lib/perl5/5.8.8/mach/CORE/libperl.so: Undefined symbol "__sbmaskrune"

              Also about problem
              http://groups.google.com.br/group/lucky.freebsd.gnome/browse_thread/thread/98c1a9561b55d303/5a7d72db34f5398e?lnk=raot

              SquidGuardDoc EN  RU Tutorial
              Localization ru_PFSense

              1 Reply Last reply Reply Quote 0
              • D
                dvserg
                last edited by

                temporary way for solve problem - copy library
                /usr/local/lib/perl5/5.8.8/mach/CORE/libperl.so
                from perl-5.8.8 ver.

                For example this may be:

                • before installation LightSquid store this lib (must be only perl-5.8.8 on 'pkg_info')
                • after installation LightSquid - restore lib (old lib must be renamed)

                SquidGuardDoc EN  RU Tutorial
                Localization ru_PFSense

                1 Reply Last reply Reply Quote 0
                • M
                  mbedyn
                  last edited by

                  Hello
                  i do not clearly uderstand how to solve this…
                  pkg_info shows both ver. of perl, 5.8.8 and 5.8.8_1
                  I have only one folder 5.8.8 in /usr/local/lib/perl5/
                  I suppouse, I have to find the old library somwhere over the internet, and replace new one? Am i right?

                  1 Reply Last reply Reply Quote 0
                  • D
                    dvserg
                    last edited by

                    this method actually before for installation LS
                    Mail me - i send this lib to you

                    SquidGuardDoc EN  RU Tutorial
                    Localization ru_PFSense

                    1 Reply Last reply Reply Quote 0
                    • J
                      jester16
                      last edited by

                      @dvserg:

                      this method actually before for installation LS
                      Mail me - i send this lib to you

                      Thanks, worked like a charm

                      1 Reply Last reply Reply Quote 0
                      • N
                        newera
                        last edited by

                        @dvserg:

                        this method actually before for installation LS
                        Mail me - i send this lib to you

                        I faced the same problem too. Can you post the lib file at here? So we can download and replace it easily.

                        Many thanks!

                        1 Reply Last reply Reply Quote 0
                        • D
                          dvserg
                          last edited by

                          Use this URL:
                          http://diskatel.narod.ru/libperl.so

                          SquidGuardDoc EN  RU Tutorial
                          Localization ru_PFSense

                          1 Reply Last reply Reply Quote 0
                          • T
                            tdickson
                            last edited by

                            Thanks As well!!! Worked for me too!
                            -tim

                            1 Reply Last reply Reply Quote 0
                            • E
                              eckman
                              last edited by

                              Can anyone give me some instruction to do this from the web admin page? I am not sure how to do this otherwise. Any help would be appreciated.

                              Thanks
                              Glenn

                              1 Reply Last reply Reply Quote 0
                              • T
                                tdickson
                                last edited by

                                Well after upgrading to 1.2 final today - I got the 500 internal server error again.
                                I reapplied this patch, but it didn't work this time, so I went to uninstall and reinstall the package - which failed.
                                Now when I go to reinstall the package I get:

                                Downloading package configuration file… done.
                                Saving updated package information... done.
                                Downloading Lightsquid and its dependencies... done.
                                Checking for successful package installation... failed!

                                Installation aborted.

                                How might I clear out whatever is needed to get this thing running again?  BTW... my other site that was upgraded to 1.2 yesterday is running perfectly fine.
                                -Tim

                                1 Reply Last reply Reply Quote 0
                                • F
                                  fribert
                                  last edited by

                                  I hate to post 'metoos', but I'm seeing this problem too.
                                  If I go and do a pkg_info, it shows perl 5.8.8, shoouldn't that be correct?
                                  Well, anyways, I would like to try out the copying of the perl file you recommended, but where should I copy it to?
                                  And being a newbied on this, how do I get the file transfered to the pfsense machine?

                                  Best regards

                                  1 Reply Last reply Reply Quote 0
                                  • T
                                    tdickson
                                    last edited by

                                    Over write this file with the attached above

                                    /usr/local/lib/perl5/5.8.8/mach/CORE/libperl.so

                                    It worked for me the first time!

                                    1 Reply Last reply Reply Quote 0
                                    • F
                                      fribert
                                      last edited by

                                      I still can't make it work.

                                      I downloaded the libperl.so from the link.
                                      I went to 'command' the webgui, and uploaded the file (to /tmp).
                                      I then moved the file from /tmp/libperl.so to /usr/local/lib/perl5/5.8.8/mach/CORE/libperl.so

                                      Still fails.

                                      Do I need to restart the server or ???

                                      1 Reply Last reply Reply Quote 0
                                      • F
                                        fribert
                                        last edited by

                                        @fribert:

                                        I still can't make it work.

                                        Still fails.

                                        Do I need to restart the server or ???

                                        Very odd, I just tried again, and now it installed!!! I didn't change anything since yesterday, so did the package change in any way?

                                        Well, this is just a happy camper, now I just need to figure out how to use it (I don't see any new menu items?).

                                        /Fribse

                                        1 Reply Last reply Reply Quote 0
                                        • D
                                          dvserg
                                          last edited by 

                                          Very odd, I just tried again, and now it installed!!! I didn't change anything since yesterday, so did the package change in any way?

                                          I make changes. Old url broken - replaced to new.

                                          How use:

                                          • enable in squid log option & work some time (for have some log statistic's)
                                          • looking option in Status/Proxy report (for quick - press button 'Refresh now')
                                          • looking 'Lightsquid report' page.

                                          SquidGuardDoc EN  RU Tutorial
                                          Localization ru_PFSense

                                          1 Reply Last reply Reply Quote 0
                                          • F
                                            fribert
                                            last edited by

                                            Ahh, got it, thankyou!

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.