Squid 3.3.10, pkg 2.2.5, pfSense 2.1.3, Errors and Transparent fail

jitguy

Dell Optiplex 755, E3110 CPU, 4GB ram, 500GB hdd, intel dual port nic

Installed 2.1.3 64-bit from CD, restored configuration, install squid3-dev.

System log contains a few of these:
php: /pkg_edit.php: The command '/usr/pbi/squid-amd64/sbin/squid -k reconfigure -f /usr/pbi/squid-amd64/etc/squid/squid.conf' returned exit code '1', the output was 'squid: ERROR: No running copy'

cache.log contains errors about parsing error-details.txt, sendto FD 19 Operation not permitted, CHILD: hello write test failed.

If I tick Transparent HTTP Proxy, web traffic stops.

access.log is empty.

Got pretty much same results when I tried squid2.

Are these errors normal? Any other info I can provide to help figure this out?

Thanks!

lizdainis

the same problem here
fixed squid3-dev with:
Enable ipv6 on system -> advanced -> networking
Disable antivirus
Diagnostics -> Command prompt ->
fetch -o /usr/local/lib/libasn1.so.10 http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/libasn1.so.10
fetch -o /usr/local/lib/libgssapi.so.10 http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/libgssapi.so.10
fetch -o /usr/local/lib/libheimntlm.so.10 http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/libheimntlm.so.10
fetch -o /usr/local/lib/libhx509.so.10 http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/libhx509.so.10
fetch -o /usr/local/lib/libkrb5.so.10 http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/libkrb5.so.10
fetch -o /usr/local/lib/libroken.so.10 http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/libroken.so.10

rebooted and its working

now testing is it stable (Transparent is disabled)

jitguy

Thanks lizdainis, hope things worked out well for you. I went back and got 2.7 working.

Something about downloading 6 libraries from somewhere seemed like not time for me to be doing squid3-dev yet.

Cino

@jitguy:

Thanks lizdainis, hope things worked out well for you. I went back and got 2.7 working.

Something about downloading 6 libraries from somewhere seemed like not time for me to be doing squid3-dev yet.

i'm running 3.3.10 pkg 2.2.5 using i386 firmware with no issues.. I'm not running in Transparent mode, but i do have anti-virus enabled (clamd)

The files that are listed are from the developers file repository. I think there has been issues to get the right files merge into the package pbi file