Successful Install on Watchguard Firebox X700!
-
Does anyone have a definative answer on what type of 512MB RAM sticks to get?
I bought a Kingston KVR100X64C2/512 512MB which works in my main firebox, but an identically spec'd (AFAIK) RAM stick didn't work in my second firebox.
-
X-Core owners!
I need at least one person to test my arm/disarm led program as I don't have an X-Core box.
I have attached the program to a post in the arm/disarm thread here.
Obviously, since I can't test it, you shouldn't be running this on a production box that you can't afford to reboot. Since it is based on some fairly extensive testing by iFloris I'm confident it will work but who knows! :P
Any feedback would be good.Steve
Edit: Has now been tested and confirmed working.
-
I searched the thread for quiet fans, and the one link posted for overclockers UK does not work; does anyone have any model numbers for quiet fans? I'd rather not make holes in the box, so would prefer fans that fit the current formation
For my each of my fireboxes I used three Scythe 40 mm Fan Mini Kaze fans (SY124010L) as replacements for the three fans in the back and a larger Papst 60 mm Fan (612FL) as the cpu cooler.
The Scythes have a different connector, so I had to reuse the original firebox cables.
The Papst really isn't meant to be used the way I'm using them, but I cut out a part in the side of the fan, in effect creating the same airflow as the original firebox cpu fan.
Also, the circumference of the Papst is 5 mm larger than the original fan, which actually helps circulation.Both my fireboxes have been functioning for about six months while being cooled in this fashion with no problems even under somewhat heavy load.
dB pressure per firebox has gone from ±71.3 to ±44.2 after replacing the fans.Thanks just ordered the scythe fans and we'll see how that turns out.
Where did you cut/mod your Papst fan?
Anyone else using a fan without mods for the cpu? -
The 1.2GHz Celeron is about 30W maximum power dissipation is this right?
That's not much more than the processor in the X-e box and nowhere near the 68W on the processor in the X-Peak, both of those have a ducted cooling solution with no fan directly on the cpu.
Might it not be possible to use something similar here?
Maybe even consider a heatpipe arrangement to move hot air directly to the back. Perhaps something from an old laptop?Steve
-
Sigh… the problem with watchdog timeouts is still there with pfsense beta 2.0.
I'm pretty sure that there's a problem with the driver for realtek nics not pfsense itself.
I'm seriously thinking about replacing my firebox with someone else, but I'm not sure what else there is to run for the same amount of investment. -
A different firebox? ;)
The X-Peak or X-Edge boxes don't have Realtek NICs.
The X-Peak actually has all Intel NICs, and three of them are GigE, if you can find one.
It was reported a few pages back that the timeouts were no longer a problem. What is your setup?
Steve
-
I'm running latest beta, configured as a OpenVPN server.
I get watchdog timeouts when connected to the firebox by VPN on a client.
I can ping, do some small surfing, but immediatly when there's some more intensive traffic there's watchdog timeouts.
I've read quite a few threads about the watchdog timeout problem, and some thread said something about different MTU-sizes.
OpenVPN set a MTU-size for the tunnel itself, might be that problem. I tried to set it different sizes, but I would always get watchdog timeouts when running VPN. -
just noticed when updating to rc1 that it now says on the dashboard
"Hardware crypto SafeNet SafeXcel-1141 rng des/3des aes md5 sha1 null"
does that mean the safenet card now works?
-
It has always been supported as far as I know.
Just that now it is reported.Steve
Edit: For a long while anyway! And I should say support for the card hasn't changed, there are many reports of people failing to make it work in this thread but technically everything needed is there.
-
does something need to be done to make it work?
It has always been supported as far as I know.
Just that now it is reported.Steve
Edit: For a long while anyway! And I should say support for the card hasn't changed, there are many reports of people failing to make it work in this thread but technically everything needed is there.
-
For the users with timeout errors, does it make any sense to switch to the RL driver instead of the RE driver?
See: http://groups.google.com/group/muc.lists.freebsd.bugs/browse_thread/thread/ba509d216f6b30e6/e84e76306f6c6249?hl=en&lnk=gst&q=freebsd+watchdog+timeout+re0#e84e76306f6c6249
-
For the users with timeout errors, does it make any sense to switch to the RL driver instead of the RE driver?
See: http://groups.google.com/group/muc.lists.freebsd.bugs/browse_thread/thread/ba509d216f6b30e6/e84e76306f6c6249?hl=en&lnk=gst&q=freebsd+watchdog+timeout+re0#e84e76306f6c6249
That thread is from 2005. As I recall the problem was not solved 2009/2010 and at that point the developer for the driver was involved.
There should be a thread here on the forums. -
The 1.2GHz Celeron is about 30W maximum power dissipation is this right?
That's not much more than the processor in the X-e box and nowhere near the 68W on the processor in the X-Peak, both of those have a ducted cooling solution with no fan directly on the cpu.
Might it not be possible to use something similar here?
Maybe even consider a heatpipe arrangement to move hot air directly to the back. Perhaps something from an old laptop?Steve
appreciate the suggestion but probably a little too mod heavy for me
-
appreciate the suggestion but probably a little too mod heavy for me
Bah, Wimp! :P :D
Steve
-
hah; thanks
i ended up buying 126010DL cooljag fans (60x60x10mm) rated at 20db, split the housing of the cpu fans that were on ther and stuck that on top of the cooling fan, essentially creating a quiet cpu fan with a side vent.
quiet and cool now!
-
Hello,
I've 2 Watchguard x1250e in stock and it's also for me a good way to recycle them :-)
Have you more information for pinout's (keyboard, usb …) ?
Have a nice day,
Patrick
-
There's a huge amount of information about this platform in this thread.
It's the same hardware in the x550e, x750e and x1250e.Just ask in that thread if you have any questions.
Steve
-
Finally received my FB X700 and installed ver 1.2.3 on a 4GB flash card. Just have to configure it so it mirrors the PC and replace the fans with Mini-Kaze (SY124010L) fans and the cpu fan (Fractal design 50mm), should be up and running in the next couple of days.
Another happy user
Sleeps
-
Finally received my FB X700 and installed ver 1.2.3 on a 4GB flash card. Just have to configure it so it mirrors the PC and replace the fans with Mini-Kaze (SY124010L) fans and the cpu fan (Fractal design 50mm), should be up and running in the next couple of days.
Another happy user
Sleeps
glad to hear it's working out for you why not 2.0?
-
Finally received my FB X700 and installed ver 1.2.3 on a 4GB flash card. Just have to configure it so it mirrors the PC and replace the fans with Mini-Kaze (SY124010L) fans and the cpu fan (Fractal design 50mm), should be up and running in the next couple of days.
Another happy user
Sleeps
glad to hear it's working out for you why not 2.0?
Replaced all fans and very silent. However I have one concern not sure if I installed the Processor fan correctly (Should the label be facing up or down?) Will try 2.0 just waiting for hard drive to arrive from ebay.
Sleeps
