Apu2 upgrade 2.1.3 Bootup Complete then nothing solved



  • after upgrade the console quit working right after the Bootup Complete message
    two things appear out of sync

    1. baud rate wants to drop to 9600
    2. console has no getty
      solved
      diagnostic -> nanobsd change to rw
      diagnostic -> edit file
      /boot/loader.conf  add or change to say: set comconsole_speed="115200"

    /etc/ttys
    change console to read
    console "/usr/libexec/getty Pc"        cons25  on  secure

    reboot and all should work


Log in to reply