LAN -> LAN2 issues with Failover.

  • Hi!

    I have this setup:


    WAN_TO_WAN2 is my Gateway Group for failover.

    I have configured Failover and it works as intended. I can access internet from both LAN and LAN2, and it changes to WAN2 when i pull the plug on WAN.

    However, as soon as i enable the disabled rules (the one that makes failover work) below, i lose the connectivity between LAN and LAN2, why? And what is needed to fix it?

    ![Screen Shot 2014-07-10 at 11.07.40.png](/public/imported_attachments/1/Screen Shot 2014-07-10 at 11.07.40.png)
    ![Screen Shot 2014-07-10 at 11.07.40.png_thumb](/public/imported_attachments/1/Screen Shot 2014-07-10 at 11.07.40.png_thumb)
    ![Screen Shot 2014-07-10 at 11.07.33.png](/public/imported_attachments/1/Screen Shot 2014-07-10 at 11.07.33.png)
    ![Screen Shot 2014-07-10 at 11.07.33.png_thumb](/public/imported_attachments/1/Screen Shot 2014-07-10 at 11.07.33.png_thumb)

  • Rebel Alliance

  • @ptt:

    Check this –>

    Worked just fine! Thanks!

Log in to reply