Firebox LCD Driver for LCDProc

stephenw10

Hey, great to hear from you. Thank you so much for your original work. :)

Steve

cii

@pyroblast:

Hello Steve,

thanks for your fast answer.

Too bad. I hoped, to let the backlight always on.
If i didn't use the LCDproc the backlight is always on, but it shows this annoying "Booting OS…"

pyro

ps. runnung pfsense on a X1250e

I've rebuilt the code from github to force the backlight always on.

You can grab the file from https://www.dropbox.com/s/6ilykwt1p6zn4rm/sdeclcd.so, sadly Dropbox doesn't work nicely with fetch…

You'll need to drop this in /usr/pbi/lcdproc-i386/lib/lcdproc/ and chmod 555 the file. Don't forget to back up your original! Once you reboot the backlight should be on.

stephenw10

Nice. Good to have options. :)

Steve

g.jauch

@cii:

I've rebuilt the code from github to force the backlight always on.

You can grab the file from https://www.dropbox.com/s/6ilykwt1p6zn4rm/sdeclcd.so, sadly Dropbox doesn't work nicely with fetch…

You'll need to drop this in /usr/pbi/lcdproc-i386/lib/lcdproc/ and chmod 555 the file. Don't forget to back up your original! Once you reboot the backlight should be on.

Hi cii,

thx for your work… but dropbox send your sdeclcd.so as HTML-Text, not as a binary file... could you please zip your file and upload it again ?

@cii:

I've rebuilt the code from github

Can someone give me a direct link to the github sources… i searched myself but didn't find the sources :'(

cu gunther

cii

You can try this URL for a zipped version:
https://dl.dropboxusercontent.com/u/6133016/bsd/sdeclcd.so.zip

It was built from this repo (under FreeBSD 8.3)
https://github.com/fmertz/sdeclcd

g.jauch

works fine, the display stays on… big THX cii ;)

btw the first dropbox-link is also working now... very strange :o

cu gunther

g.jauch

Hi,

under pfsense 2.1 with the latest LCDproc-Dev driver you can configure the displayed entries via the webconfigurator inside the LCDproc Service Menu:

1. Simply navigate to the LCD-Proc Service Menu: 'Services -> LCDproc'

Click on "Enable LCDproc at startup" and change the settings as shown on the picture, like stephenw10 mentioned in this posting

2. Then click on the "Screens" Tab to see the following menu

and choose what the display should display, then click the "SAVE" button at the bottom of the page!

And your LCD become alive ;)

3. If your LCD shows only the following picture

This means that your lcdproc-client "died", happens for me on every reboot… don't know why... i will have a look inside the php-script ( lcdproc-client is really a php-shell-script )

Simple workaround... is to restart the lcdproc by hand ( 1. via command line, 2. via shellcmd )

/usr/local/etc/rc.d/lcdproc.sh restart

and all is fine... and running!

cu gunther

stephenw10

If you find a solution to that problem please tell us. :)
I have personally tried many, many modifications to the lcdproc client and start/stop scripts. None of them were very successful. That's the reason I have ended starting the client and server outside of the package system as detailed in that post.
There is a lot of discussion about it in the lcdproc-dev thread in the packages subforum.

Steve

g.jauch

@stephenw10:

If you find a solution to that problem please tell us. :)

It took me a while to find the "real" problem.

As I mentioned my problem occured only after a startup ( reboot, power on ), the LCD-Daemon is running but obviously no Client.

If you simply restart the LCDproc via /usr/local/etc/rc.d/lcdproc.sh after the boot everything is fine and stays fine!

Q: So whats wrong during the startup/system boot ???
A: Both scripts ( /usr/local/etc/rc.d/lcdproc.sh and /usr/local/pkg/lcdproc_client.php ) itself are fine!

The "real problem" is the OS… pfSense since version 2.1 has a "startup" bug!

I must take a deeper look into the the system rc-scripts/configuration.

The only thing i can tell right now is... that since pfSense 2.1 every script under /usr/local/etc/rc.d gets called twice ( with a pause of ~3 seconds ) during the system startup/boot

You can easily modify the lcdproc.sh to prevent a double start, actually there is already some code inside the "rc_start section", but this code seems not to work well!

>>> Here's a video showing the "problem/bug" <<<

stay tuned… i'll be back 8)

cu gunther

stephenw10

You'll find it gets started at least twice and that depending on what else you're loading and what speed your CPU is the resulting number of clients and servers can vary.
There is much in the lcdproc-dev thread, for example here: https://forum.pfsense.org/index.php?topic=44034.msg260465#msg260465

Steve

g.jauch

@stephenw10:

You'll find it gets started at least twice and that depending on what else you're loading and what speed your CPU is the resulting number of clients and servers can vary.
There is much in the lcdproc-dev thread, for example here: https://forum.pfsense.org/index.php?topic=44034.msg260465#msg260465

Steve

Hi steve,

I updated my previous posting… I forgot the video link!

This problem/bug has nothing to do with LCDproc !!!

I made a simple test script t.sh... and put it under /usr/local/etc/rc.d/
The script simply redirect it's output to a file under /tmp/debug_log.txt

Inside the script i only call the 'date' command and echo the $1 value !!!

Both VM's are fresh installed from the LiveCD... Quick Install, Standard Kernel, no changes!

Under 2.03 the script is processed/called 1 time ( which is correct ) under 2.1 ( and above ) it's processed/called 2 times during the startup !

Why is my script called twice... this doesn't make any sense to me ???

cu gunther

stephenw10

Yes, interesting. I think in fact most of the investigative work done in the lcdproc-dev thread was before 2.1 was even in beta.
One thing to note is that the package system will restart all the packages if an interface goes down or up which can be a problem during boot. It should not do that IMHO. Another thing is that the lcdproc rc script issues a killall for the server and client so even if three clients have been started (which I've seen) they are all killed. Another thing is that the first instance of LCDd is 'un-killable' such that it doesn't get killed by the script and a new instance is started but fails because it can't attch to the parallel port.
Also of note is that we removed the loop script that continually restarted the server and client if it wasn't running. This seemed completely superfluous in 2.0 but since then a time limit on php processes has been introduced (I think) so that the php client will eventually die.

Perhaps the most interesting thing is that this is only a problem with the sdeclcd driver. Users with other LCD types run lcdproc-dev without any issues.

Steve

g.jauch

@stephenw10:

One thing to note is that the package system will restart all the packages if an interface goes down or up which can be a problem during boot.

Yes that causes the problem… I wonder how I've overlooked this error messages in system.log all the time :o

Apr 18 22:04:38 pfSense php: rc.newwanip: rc.newwanip: Informational is starting em0.
Apr 18 22:04:38 pfSense php: rc.newwanip: rc.newwanip: on (IP address: 192.168.211.130) (interface: wan) (real interface: em0).
Apr 18 22:04:41 pfSense check_reload_status: Updating all dyndns
Apr 18 22:04:45 pfSense php: rc.bootup: Creating rrd update script
Apr 18 22:04:45 pfSense syslogd: exiting on signal 15
Apr 18 22:04:45 pfSense syslogd: kernel boot file is /boot/kernel/kernel

>>> Apr 18 22:04:45 pfSense php: rc.start_packages: Restarting/Starting all packages.

Apr 18 22:04:46 pfSense login: login on ttyv0 as root
Apr 18 22:04:46 pfSense sshlockout[58995]: sshlockout/webConfigurator v3.0 starting up
Apr 18 22:04:46 pfSense php: rc.newwanip: Resyncing OpenVPN instances for interface WAN.
Apr 18 22:04:46 pfSense php: rc.newwanip: Creating rrd update script
Apr 18 22:04:48 pfSense php: rc.newwanip: pfSense package system has detected an ip change 192.168.1.10 ->  192.168.211.130 ... Restarting packages.
Apr 18 22:04:48 pfSense check_reload_status: Starting packages
Apr 18 22:04:48 pfSense check_reload_status: Reloading filter

>>> Apr 18 22:04:51 pfSense php: rc.start_packages: Restarting/Starting all packages.

But if you use static IP's for WAN & LAN the restarts aren't triggered ! All is fine then.
The default is DHCP for WAN…

@stephenw10:

It should not do that IMHO.

Fully agree with that!

@stephenw10:

Another thing is that the lcdproc rc script issues a killall for the server and client so even if three clients have been started (which I've seen) they are all killed. Another thing is that the first instance of LCDd is 'un-killable' such that it doesn't get killed by the script and a new instance is started but fails because it can't attch to the parallel port.

Indeed… after the system is up there are 2 LCD's and one "unfinished/waiting/hanging" 'lcdproc.sh start' process running!


[2.1.2-RELEASE][root@pfSense.localdomain]/root(1): ps -auxww | grep -i lcd
root    6656  0.0  0.1  3644  1496  ??  IN    0:00.00 /bin/sh /usr/local/etc/rc.d/lcdproc.sh start
root    7886  0.0  0.1  3300  1136  ??  IN      0:00.00 /usr/pbi/lcdproc-i386/sbin/LCDd -c /usr/local/etc/LCDd.conf -u nobody
nobody  8224  0.0  0.1  3316  1360  ??  SNs     0:00.26 /usr/pbi/lcdproc-i386/sbin/LCDd -c /usr/local/etc/LCDd.conf -u nobody

If you kill the LCDd process running as root / PID 7886 in this case… the lcdproc.sh script proceeds and finaly connect to the "real" LCDd and all is good, display gets alive!

@stephenw10:

Also of note is that we removed the loop script that continually restarted the server and client if it wasn't running. This seemed completely superfluous in 2.0 but since then a time limit on php processes has been introduced (I think) so that the php client will eventually die.

I disliked the used rc_start code/logic inside the lcdproc.sh script since I've looked the first time into that file.
IMHO there shouldn't be a kill/termination of the "services" you are trying to start inside that procedure, if something went wrong with that kills you end up ( as you allready mentioned ) with multiple instances of running LCDd and lcdproc_client.php scripts.

Why not simply check inside the rc_start if there is already a LCDd & lcdproc_client.php running and react on that in a proper way.

If no LCDd is running: Start it, if it's already running then ignore that 2.nd start request completely
Same thing for the lcdproc_client.php, further… only start the lcdproc_client.php if there is a LCDd running, because without a LCDd the start of the php script is useless

Something like that should be used inside the rc_start segment of lcdproc.sh to be "save":


rc_start() {
if  [ ! `pgrep -anx LCDd` ]; then
	/usr/bin/nice -20 /usr/local/sbin/LCDd -c /usr/local/etc/LCDd.conf -u nobody
fi

if [ ! `pgrep -f lcdproc_client.php` ] -a [ `pgrep -anx LCDd` ];then
	/usr/bin/nice -20 /usr/local/bin/php -f /usr/local/pkg/lcdproc_client.php &
fi
}

@stephenw10:

Perhaps the most interesting thing is that this is only a problem with the sdeclcd driver. Users with other LCD types run lcdproc-dev without any issues.

Maybe they use static IP addresses! It should not be a driver problem.

cu gunther

stephenw10

@g.jauch:

It should not be a driver problem.

Indeed it should not yet it seems to be.
My only thoughts on that were that the sdeclcd driver somehow had a delay in initialising the hardware such that it is unable to start/stop in the required time when multiple restarts are called at boot. That might also explain why the driver seems to work better on the X-Core box which has a slower CPU. However no amount of adding or removing delays from the start script seemed to really solve the problem.

Interestingly using the Shellcmd package to start the client and server outside of the package system the commands only get run once. It might be worth looking at how shellcmd is arranged to run only once.

Steve

g.jauch

@stephenw10:

Interestingly using the Shellcmd package to start the client and server outside of the package system the commands only get run once. It might be worth looking at how shellcmd is arranged to run only once.

shellcmd add entries to /cf/conf/config.xml and does not use /usr/local/etc/rc.d/

cu gunther

stephenw10

Ah, yes of course.

Steve

g.jauch

Here's a new way to avoid the "restarts", multi-runs of /usr/local/etc/rc.d files at startup!

At least the way I did it ;)

Apr 20 21:05:23 pfSense php: rc.newwanip: pfSense package system has detected an ip change 192.168.178.45 ->  192.168.178.45 ... Restarting packages.

Strange… why is the restart triggered ??? there is no change in my WAN IP address at all !

So I looked inside the /etc/rc.newwanip script to see whats going on:

if (!is_ipaddr($oldip) || $curwanip != $oldip || !is_ipaddrv4($config['interfaces'][$interface]['ipaddr']))

If any of these 3 conditions are true then the restart_packages() gets triggered.

The first 2 conditions are fine… it's the 3rd who triggers

!is_ipaddrv4($config['interfaces'][$interface]['ipaddr'])

If WAN configuration is set to DHCP then

$config['interfaces'][$interface]['ipaddr']

$config is set to dhcp, and so the is_ipaddrv4("dhcp") returns false, because dhcp is clearly not an IPV4 address.

Till pfSense 2.0.3 this if-condition contained the first 2 conditions only!

So finally I looked inside the /etc/inc/util.inc which contains the implementation of this is_ipaddrv4() function

and added this code inside the function:

if ( $ipaddr == "dhcp" )
	return true;

Now everything works fine… and you can leave the /usr/local/etc/rc.d/lcdproc.sh script as it is.

cu Gunther

ArkAngel

Hello,

Thanks for doing all this debugging on the LCDproc-related problems (and globally all you did on the firebox-pfsense project). Your work is much appreciated!

So finally I looked inside the /etc/inc/util.inc which contains the implementation of this is_ipaddrv4() function

and added this code inside the function:

Code: [Select]

if ( $ipaddr == "dhcp" )
return true;

Now everything works fine… and you can leave the /usr/local/etc/rc.d/lcdproc.sh script as it is.

Tried implementing this as you said, inside the is_ipaddrv4() function, but I don't know what I'm doing wrong, when I rebooted the firewall apinger was shown as not running and this is what I had in the logfiles:

Apr 21 08:36:03 apinger: Starting Alarm Pinger, apinger(19845) 
Apr 21 08:36:03 apinger: No usable targets found, exiting

Here's what the function looks like:

/* returns true if $ipaddr is a valid dotted IPv4 address */
function is_ipaddrv4($ipaddr) {
	if ($ipaddr == "dhcp")
		return true;

	if (!is_string($ipaddr) || empty($ipaddr))
		return false;

	$ip_long = ip2long($ipaddr);
	$ip_reverse = long2ip32($ip_long);

	if ($ipaddr == $ip_reverse)
		return true;
	else
		return false;
}

What I am doing wrong? If I remove the added lines and reboot, everything is back to normal.

Thanks!

ArkAngel

stephenw10

Hmm, this is tricky to my head around. More coffee perhaps! (more likely less :P)

It seems odd that this check is for a valid IP address in the config. If it always failed on dhcp (and presumably, pppoe or any thing other than static) why does it eventually stop renewing the interfaces?
Simply adding that line seems dangerous, though I have no actual code to point to to back that up.

Steve

g.jauch

@ArkAngel:

What I am doing wrong? If I remove the added lines and reboot, everything is back to normal.

Thanks!

ArkAngel

Please answer me 2 questions:
1. What is the "Alarm Pinger"… is it a addon package ?
2. What version of LCDProc-Dev & pfSense do you use ?

I'll have a deeper look into it... tommorow ;)

@stephenw10:

Hmm, this is tricky to my head around. More coffee perhaps! (more likely less :P)

It seems odd that this check is for a valid IP address in the config. If it always failed on dhcp (and presumably, pppoe or any thing other than static) why does it eventually stop renewing the interfaces?

That is indeed a good question… why is this not turning into an endless loop ?
I'll also take a look what pfSense 2.0.3 carries in the "$config['interfaces'][$interface]['ipaddr']" Array, I'm pretty sure it's the real IP address that you receive from your DHCP server instead of the word "dhcp".

I asume that after the restart… pfSense versions > 2.0.3 return also the real IP inside that "$config array"... otherwise you would get that mentioned "endless loop" !

@stephenw10:

Simply adding that line seems dangerous, though I have no actual code to point to to back that up.

yes it is !

Another approch could be to touch a file if "pfsense" does that restart and check inside the scripts under /usr/local/etc/rc.d/ if that file is there and if so simply exit and do nothing!

cu gunther