TimeWarner blocking ICMP pings to 8.8.8.8
-
Hello,
When I've been deploying pfSense router, I've been setting up gateway monitoring to 8.8.8.8.
Lately I've been noticing that a solid 20% or more packet loss being recorded to 8.8.8.8 in RRD Graphs–>Quality graphs, but only on TimeWarner coaxial connections. Is anyone else noticing anything similar?
-
I'm not US-based, but if they were blocking it then you would get a lot more than 20% loss… more like 100% ;D
I would never use something so far away as the monitoring point. For example, for me 8.8.8.8 is 7 hops away. I would monitor my direct ISP gateway, or maybe one hop farther if their gateway is making apinger act up.
-
I lowered my pings to once every 10 seconds instead of 1. Works much better.
-
TWC isn't blocking your pings. Trust me on this one…I believe apinger is way to sensitive ever since 2.1.x came out. Never really had any issues before 2.1.x, once in a while I would; but it was signal issues with the cable modem or the amp across the street. I have mine setup to just ping the CMTS gateway.
My work around was this:
Latency thresholds 1000 1300
Packet Loss thresholds 20 30
Probe Interval 5
Down 30Before the above settings, apinger would say my connection is down all time when streaming movies on netflixs... Once it a while it still does but that is because I'm streaming 2-3 movies and downloading a bunch of torrents maxing out my 100/5 connection.