Navigation

    Netgate Discussion Forum
    • Register
    • Login
    • Search
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search

    Netgear AC763S problems

    Hardware
    2
    15
    1808
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • E
      eddi1984 last edited by

      Hi,

      I have a Netgear AC763S hotspot.

      I connected it via USB to the pfsense box and it was recognized as Sierra Wireless AC763S.

      I also followed the the PPP settings here: https://doc.pfsense.org/index.php/Configuring_3G_modems.

      After some trying I figured out that cuaU0.3 is the serial port and it does respond to AT commands, sort of. Let me explain.

      When I setup the PPP settings nothing was working. Until finally the cuaU0.3 responded to AT commands. It would attempt to connect once, get to the
      ppp: [opt1_link0] MODEM: can't ioctl(TIOCMGET) /dev/cuaU0.3: Device not configured
      and than stop. After that, it would not connect anymore, it was not able to connect to the serial port anymore.

      I had to go in and change the dial number or the ANP address and than it would do another attempt and fail. Than I had to change one or the other again, and it would try to connect once again and fail.

      I am in Canada and the SIM is with TELUS. SIM lock is off. I used dial code 99# and 99*1# and both work. I also used isp.telus.com and sp.telus.com and again both worked, but just once. It would always fail at ppp: [opt1_link0] MODEM: can't ioctl(TIOCMGET) /dev/cuaU0.3: Device not configured.

      I had the settings with and without MAC spoofing (used the MAC of the hotspot).

      Any idea why its failing at ppp: [opt1_link0] MODEM: can't ioctl(TIOCMGET) /dev/cuaU0.3: Device not configured and what I can do about it?

      Here is the whole ppp log:

      Aug 24 00:36:56	ppp:
Aug 24 00:36:56	ppp: process 82215 started, version 5.7 (root@pfSense_RELENG_2_2_amd64_amd64-pfSense_RELENG_2_2-job-01 00:07 9-Jun-2015)
Aug 24 00:36:56	ppp: web: web is not running
Aug 24 00:36:56	ppp: [opt1] Bundle: Interface ng0 created
Aug 24 00:36:56	ppp: [opt1_link0] Link: OPEN event
Aug 24 00:36:56	ppp: [opt1_link0] LCP: Open event
Aug 24 00:36:56	ppp: [opt1_link0] LCP: state change Initial --> Starting
Aug 24 00:36:56	ppp: [opt1_link0] LCP: LayerStart
Aug 24 00:36:56	ppp: [opt1_link0] CHAT: +CGDCONT=1,"IP","isp.telus.com"
Aug 24 00:36:56	ppp: [opt1_link0] CHAT: Detected Hayes compatible modem.
Aug 24 00:36:56	ppp: [opt1_link0] CHAT: Dialing server at *99***1#...
Aug 24 00:36:56	ppp: [opt1_link0] CHAT: ATDT*99***1#
Aug 24 00:36:56	ppp: [opt1_link0] CHAT: Connected at 100000000.
Aug 24 00:36:56	ppp: [opt1_link0] MODEM: chat script succeeded
Aug 24 00:36:56	ppp: [opt1_link0] Link: UP event
Aug 24 00:36:56	ppp: [opt1_link0] LCP: Up event
Aug 24 00:36:56	ppp: [opt1_link0] LCP: state change Starting --> Req-Sent
Aug 24 00:36:56	ppp: [opt1_link0] LCP: SendConfigReq #1
Aug 24 00:36:56	ppp: [opt1_link0] ACFCOMP
Aug 24 00:36:56	ppp: [opt1_link0] PROTOCOMP
Aug 24 00:36:56	ppp: [opt1_link0] ACCMAP 0x000a0000
Aug 24 00:36:56	ppp: [opt1_link0] MRU 1500
Aug 24 00:36:56	ppp: [opt1_link0] MAGICNUM fd1c4aee
Aug 24 00:36:56	ppp: [opt1_link0] LCP: rec'd Configure Request #0 (Req-Sent)
Aug 24 00:36:56	ppp: [opt1_link0] ACCMAP 0x00000000
Aug 24 00:36:56	ppp: [opt1_link0] AUTHPROTO CHAP MD5
Aug 24 00:36:56	ppp: [opt1_link0] MAGICNUM d0acdf7c
Aug 24 00:36:56	ppp: [opt1_link0] PROTOCOMP
Aug 24 00:36:56	ppp: [opt1_link0] ACFCOMP
Aug 24 00:36:56	ppp: [opt1_link0] LCP: SendConfigAck #0
Aug 24 00:36:56	ppp: [opt1_link0] ACCMAP 0x00000000
Aug 24 00:36:56	ppp: [opt1_link0] AUTHPROTO CHAP MD5
Aug 24 00:36:56	ppp: [opt1_link0] MAGICNUM d0acdf7c
Aug 24 00:36:56	ppp: [opt1_link0] PROTOCOMP
Aug 24 00:36:56	ppp: [opt1_link0] ACFCOMP
Aug 24 00:36:56	ppp: [opt1_link0] LCP: state change Req-Sent --> Ack-Sent
Aug 24 00:36:56	ppp: [opt1_link0] LCP: rec'd Configure Ack #1 (Ack-Sent)
Aug 24 00:36:56	ppp: [opt1_link0] ACFCOMP
Aug 24 00:36:56	ppp: [opt1_link0] PROTOCOMP
Aug 24 00:36:56	ppp: [opt1_link0] ACCMAP 0x000a0000
Aug 24 00:36:56	ppp: [opt1_link0] MRU 1500
Aug 24 00:36:56	ppp: [opt1_link0] MAGICNUM fd1c4aee
Aug 24 00:36:56	ppp: [opt1_link0] LCP: state change Ack-Sent --> Opened
Aug 24 00:36:56	ppp: [opt1_link0] LCP: auth: peer wants CHAP, I want nothing
Aug 24 00:36:56	ppp: [opt1_link0] LCP: LayerUp
Aug 24 00:36:56	ppp: [opt1_link0] LCP: rec'd Discard Request #1 (Opened)
Aug 24 00:36:56	ppp: [opt1_link0] CHAP: rec'd CHALLENGE #1 len: 35
Aug 24 00:36:56	ppp: [opt1_link0] Name: "UMTS_CHAP_SRVR"
Aug 24 00:36:56	ppp: [opt1_link0] CHAP: Using authname "user"
Aug 24 00:36:56	ppp: [opt1_link0] CHAP: sending RESPONSE #1 len: 25
Aug 24 00:36:56	ppp: [opt1_link0] CHAP: rec'd SUCCESS #1 len: 4
Aug 24 00:36:56	ppp: [opt1_link0] LCP: authorization successful
Aug 24 00:36:56	ppp: [opt1_link0] Link: Matched action 'bundle "opt1" ""'
Aug 24 00:36:56	ppp: [opt1_link0] Link: Join bundle "opt1"
Aug 24 00:36:56	ppp: [opt1] Bundle: Status update: up 1 link, total bandwidth 100000000 bps
Aug 24 00:36:56	ppp: [opt1] IPCP: Open event
Aug 24 00:36:56	ppp: [opt1] IPCP: state change Initial --> Starting
Aug 24 00:36:56	ppp: [opt1] IPCP: LayerStart
Aug 24 00:36:56	ppp: [opt1] IPV6CP: Open event
Aug 24 00:36:56	ppp: [opt1] IPV6CP: state change Initial --> Starting
Aug 24 00:36:56	ppp: [opt1] IPV6CP: LayerStart
Aug 24 00:36:56	ppp: [opt1] IPCP: Up event
Aug 24 00:36:56	ppp: [opt1] IPCP: state change Starting --> Req-Sent
Aug 24 00:36:56	ppp: [opt1] IPCP: SendConfigReq #1
Aug 24 00:36:56	ppp: [opt1] IPADDR 0.0.0.0
Aug 24 00:36:56	ppp: [opt1] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Aug 24 00:36:56	ppp: [opt1] IPV6CP: Up event
Aug 24 00:36:56	ppp: [opt1] IPV6CP: state change Starting --> Req-Sent
Aug 24 00:36:56	ppp: [opt1] IPV6CP: SendConfigReq #1
[b]Aug 24 00:36:58	ppp: [opt1_link0] MODEM: can't ioctl(TIOCMGET) /dev/cuaU0.3: Device not configured[/b]
Aug 24 00:36:58	ppp: [opt1_link0] Link: DOWN event
Aug 24 00:36:58	ppp: [opt1_link0] LCP: Down event
Aug 24 00:36:58	ppp: [opt1_link0] LCP: state change Opened --> Starting
Aug 24 00:36:58	ppp: [opt1_link0] Link: Leave bundle "opt1"
Aug 24 00:36:58	ppp: [opt1] Bundle: Status update: up 0 links, total bandwidth 9600 bps
Aug 24 00:36:58	ppp: [opt1] IPCP: Close event
Aug 24 00:36:58	ppp: [opt1] IPCP: state change Req-Sent --> Closing
Aug 24 00:36:58	ppp: [opt1] IPCP: SendTerminateReq #2
Aug 24 00:36:58	ppp: [opt1] IPV6CP: Close event
Aug 24 00:36:58	ppp: [opt1] IPV6CP: state change Req-Sent --> Closing
Aug 24 00:36:58	ppp: [opt1] IPV6CP: SendTerminateReq #2
Aug 24 00:36:58	ppp: [opt1] IPCP: Down event
Aug 24 00:36:58	ppp: [opt1] IPCP: LayerFinish
Aug 24 00:36:58	ppp: [opt1] IPCP: state change Closing --> Initial
Aug 24 00:36:58	ppp: [opt1] IPV6CP: Down event
Aug 24 00:36:58	ppp: [opt1] IPV6CP: LayerFinish
Aug 24 00:36:58	ppp: [opt1] Bundle: No NCPs left. Closing links...
Aug 24 00:36:58	ppp: [opt1] IPV6CP: state change Closing --> Initial
Aug 24 00:36:58	ppp: [opt1_link0] LCP: LayerDown
Aug 24 00:36:58	ppp: [opt1_link0] Link: reconnection attempt 1 in 3 seconds
Aug 24 00:37:01	ppp: [opt1_link0] Link: reconnection attempt 1
Aug 24 00:37:01	ppp: [opt1_link0] can't open /dev/cuaU0.3: No such file or directory
Aug 24 00:37:01	ppp: [opt1_link0] MODEM: Fail to open serial port /dev/cuaU0.3 on speed 115200
Aug 24 00:37:01	ppp: [opt1_link0] Link: DOWN event
Aug 24 00:37:01	ppp: [opt1_link0] LCP: Down event
Aug 24 00:37:01	ppp: [opt1_link0] Link: reconnection attempt 2 in 2 seconds

      Cheers,

      Eddi

      1 Reply Last reply Reply Quote 0
      • ?
        Guest last edited by

        I have found that pfSense installs a terminal program called "cu". I would try menu#8 -command line and run
        cu -l /dev/cuaU0.3 and see if your really talking to the correct port/modem. Do you know AT commands?

        I have a feeling that maybe your mass storage device is still enabled or maybe you have the wrong port.
        If you post your boot log it will help.

        I have found that some Sierra modems offer 2 AT consoles on two different ports. One works with AT commands the other works until a connection attempt. I would try other ports with cu.

        Also i would use Ubuntu and install Modem Manager GUI to discover what mode the device is in. You may need to flash it to an DirectIP firmware.

        Also I see IP6 in your log and i would disable it unless being used. Both system wide and per interface.

        1 Reply Last reply Reply Quote 0
        • ?
          Guest last edited by

          From the MiFi's menu also make sure tethering is enabled and that any CD ROM mode is disabled.

          1 Reply Last reply Reply Quote 0
          • E
            eddi1984 last edited by

            @Phishfry:

            I have found that pfSense installs a terminal program called "cu". I would try menu#8 -command line and run
            cu -l /dev/cuaU0.3 and see if your really talking to the correct port/modem. Do you know AT commands?

            I have a feeling that maybe your mass storage device is still enabled or maybe you have the wrong port.
            If you post your boot log it will help.

            I have found that some Sierra modems offer 2 AT consoles on two different ports. One works with AT commands the other works until a connection attempt. I would try other ports with cu.

            Also i would use Ubuntu and install Modem Manager GUI to discover what mode the device is in. You may need to flash it to an DirectIP firmware.

            Also I see IP6 in your log and i would disable it unless being used. Both system wide and per interface.

            Thanks for the reply. When I run the cu command as you suggested, it just says "Connected" but the console also freezes (done it over vpn, SSH into box, not local). I have to close the session.

            Here is the boot log:

            $ dmesg
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE-p15 #0 c5ab052(releng/10.1)-dirty: Sat Jul 25 20:20:58 CDT 2015
    root@pfs22-amd64-builder:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_SMP.10 amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Core(TM) i3 CPU         550  @ 3.20GHz (3192.04-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x20655  Family = 0x6  Model = 0x25  Stepping = 5
  Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x9ae3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,sse4.1,sse4.2,popcnt>AMD Features=0x28100800 <syscall,nx,rdtscp,lm>AMD Features2=0x1 <lahf>VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8257368064 (7874 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <dell  pe_sc3 ="">
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  4
 cpu3 (AP): APIC ID:  5
ioapic0 <version 2.0=""> irqs 0-23 on motherboard
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806345e0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80634690, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80634740, 0) error 1
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8060ce10, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8060cec0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8060cf70, 0) error 1
random: <software, yarrow=""> initialized
kbd1 at kbdmux0
cryptosoft0: <software crypto=""> on motherboard
padlock0: No ACE support.
acpi0: <dell pe_sc3=""> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <acpi cpu=""> on acpi0
cpu1: <acpi cpu=""> on acpi0
cpu2: <acpi cpu=""> on acpi0
cpu3: <acpi cpu=""> on acpi0
atrtc0: <at realtime="" clock=""> port 0x70-0x7f irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <at timer=""> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <high precision="" event="" timer=""> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <acpi host-pci="" bridge=""> port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus=""> on pcib0
pcib1: <acpi pci-pci="" bridge=""> at device 1.0 on pci0
pci1: <acpi pci="" bus=""> on pcib1
pcib2: <pci-pci bridge=""> at device 0.0 on pci1
pci2: <pci bus=""> on pcib2
pcib3: <pci-pci bridge=""> at device 2.0 on pci2
pci3: <pci bus=""> on pcib3
igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0=""> port 0xfcc0-0xfcdf mem 0xdf7c0000-0xdf7dffff,0xdf800000-0xdf9fffff,0xdf7b8000-0xdf7bbfff irq 18 at device 0.0 on pci3
igb0: Using MSIX interrupts with 5 vectors
igb0: Ethernet address: 00:1b:21:15:b5:e8
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0=""> port 0xfce0-0xfcff mem 0xdf7e0000-0xdf7fffff,0xdfa00000-0xdfbfffff,0xdf7bc000-0xdf7bffff irq 19 at device 0.1 on pci3
igb1: Using MSIX interrupts with 5 vectors
igb1: Ethernet address: 00:1b:21:15:b5:e9
igb1: Bound queue 0 to cpu 0
igb1: Bound queue 1 to cpu 1
igb1: Bound queue 2 to cpu 2
igb1: Bound queue 3 to cpu 3
pcib4: <pci-pci bridge=""> at device 4.0 on pci2
pci4: <pci bus=""> on pcib4
igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0=""> port 0xecc0-0xecdf mem 0xdf1c0000-0xdf1dffff,0xdf200000-0xdf3fffff,0xdf1b8000-0xdf1bbfff irq 16 at device 0.0 on pci4
igb2: Using MSIX interrupts with 5 vectors
igb2: Ethernet address: 00:1b:21:15:b5:ec
igb2: Bound queue 0 to cpu 0
igb2: Bound queue 1 to cpu 1
igb2: Bound queue 2 to cpu 2
igb2: Bound queue 3 to cpu 3
igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0=""> port 0xece0-0xecff mem 0xdf1e0000-0xdf1fffff,0xdf400000-0xdf5fffff,0xdf1bc000-0xdf1bffff irq 17 at device 0.1 on pci4
igb3: Using MSIX interrupts with 5 vectors
igb3: Ethernet address: 00:1b:21:15:b5:ed
igb3: Bound queue 0 to cpu 0
igb3: Bound queue 1 to cpu 1
igb3: Bound queue 2 to cpu 2
igb3: Bound queue 3 to cpu 3
ehci0: <intel pch="" usb="" 2.0="" controller="" usb-b=""> mem 0xdfcfa000-0xdfcfa3ff irq 22 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib5: <acpi pci-pci="" bridge=""> at device 28.0 on pci0
pci5: <acpi pci="" bus=""> on pcib5
bce0: <qlogic netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)=""> mem 0xda000000-0xdbffffff irq 16 at device 0.0 on pci5
miibus0: <mii bus=""> on bce0
brgphy0: <bcm5709 10="" 100="" 1000baset="" phy=""> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Ethernet address: bc:30:5b:d6:c3:68
bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce1: <qlogic netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)=""> mem 0xdc000000-0xddffffff irq 17 at device 0.1 on pci5
miibus1: <mii bus=""> on bce1
brgphy1: <bcm5709 10="" 100="" 1000baset="" phy=""> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce1: Ethernet address: bc:30:5b:d6:c3:69
bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11)
Coal (RX:6,6,18,18; TX:20,20,80,80)
ehci1: <intel pch="" usb="" 2.0="" controller="" usb-a=""> mem 0xdfcfc000-0xdfcfc3ff irq 22 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
pcib6: <acpi pci-pci="" bridge=""> at device 30.0 on pci0
pci6: <acpi pci="" bus=""> on pcib6
vgapci0: <vga-compatible display=""> mem 0xd9800000-0xd9ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at device 3.0 on pci6
vgapci0: Boot video device
isab0: <pci-isa bridge=""> at device 31.0 on pci0
isa0: <isa bus=""> on isab0
ahci0: <intel 5="" 3400="" series="" ahci="" sata="" controller=""> port 0xdcd0-0xdcd7,0xdcc8-0xdccb,0xdcd8-0xdcdf,0xdccc-0xdccf,0xdce0-0xdcff mem 0xdfcfe000-0xdfcfe7ff irq 20 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <ahci channel=""> at channel 0 on ahci0
ahcich1: <ahci channel=""> at channel 1 on ahci0
ahcich2: <ahci channel=""> at channel 2 on ahci0
ahcich3: <ahci channel=""> at channel 3 on ahci0
ahcich4: <ahci channel=""> at channel 4 on ahci0
ahcich5: <ahci channel=""> at channel 5 on ahci0
ahciem0: <ahci enclosure="" management="" bridge=""> on ahci0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <isa option="" roms=""> at iomem 0xc0000-0xc7fff,0xec000-0xeffff on isa0
sc0: <system console=""> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <generic isa="" vga=""> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <enhanced speedstep="" frequency="" control=""> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 18
device_attach: est0 attach returned 6
p4tcc0: <cpu frequency="" thermal="" control=""> on cpu0
est1: <enhanced speedstep="" frequency="" control=""> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 18
device_attach: est1 attach returned 6
p4tcc1: <cpu frequency="" thermal="" control=""> on cpu1
est2: <enhanced speedstep="" frequency="" control=""> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 18
device_attach: est2 attach returned 6
p4tcc2: <cpu frequency="" thermal="" control=""> on cpu2
est3: <enhanced speedstep="" frequency="" control=""> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 18
device_attach: est3 attach returned 6
p4tcc3: <cpu frequency="" thermal="" control=""> on cpu3
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
random: unblocking device.
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <intel> at usbus0
uhub0: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus0
ugen1.1: <intel> at usbus1
uhub1: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087=""> at usbus0
uhub2: <vendor 2="" 9="" 0x8087="" product="" 0x0020,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr=""> on usbus0
ugen1.2: <vendor 0x8087=""> at usbus1
uhub3: <vendor 2="" 9="" 0x8087="" product="" 0x0020,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr=""> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen1.3: <logitech> at usbus1
ukbd0: <logitech 0="" 3="" usb="" receiver,="" class="" 0,="" rev="" 2.00="" 12.01,="" addr=""> on usbus1
kbd0 at ukbd0
uhid0: <logitech 0="" 3="" usb="" receiver,="" class="" 0,="" rev="" 2.00="" 12.01,="" addr=""> on usbus1
ugen1.4: <vendor 0x0424=""> at usbus1
uhub4: <vendor 4="" 9="" 0x0424="" product="" 0x2514,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr=""> on usbus1
uhub4: MTT enabled
uhub4: 2 ports with 2 removable, self powered
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <samsung he253gj="" 1aj30001=""> ATA-8 SATA 2.x device
ada0: Serial Number S2B5J90B325667
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238418MB (488281250 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <ahci sgpio="" enclosure="" 1.00="" 0001=""> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
cd0 at ahcich3 bus 0 scbus3 target 0 lun 0
cd0: <teac dvd-rom="" dv-28sw="" r.2a=""> Removable CD-ROM SCSI-0 device 
cd0: Serial Number 10102011162723
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1596022432 Hz quality 1000
Trying to mount root from ufs:/dev/ufsid/55960aa86e06de84 [rw]...
coretemp0: <cpu on-die="" thermal="" sensors=""> on cpu0
est0: <enhanced speedstep="" frequency="" control=""> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 18
device_attach: est0 attach returned 6
coretemp1: <cpu on-die="" thermal="" sensors=""> on cpu1
est1: <enhanced speedstep="" frequency="" control=""> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 18
device_attach: est1 attach returned 6
coretemp2: <cpu on-die="" thermal="" sensors=""> on cpu2
est2: <enhanced speedstep="" frequency="" control=""> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 18
device_attach: est2 attach returned 6
coretemp3: <cpu on-die="" thermal="" sensors=""> on cpu3
est3: <enhanced speedstep="" frequency="" control=""> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 18
device_attach: est3 attach returned 6
vlan0: changing name to 'bce1_vlan10'
vlan1: changing name to 'bce1_vlan20'
vlan2: changing name to 'bce1_vlan30'
vlan3: changing name to 'bce1_vlan40'
bce0: Gigabit link up!
bce0: link state changed to UP
bce0: Gigabit link up!
bce0: Gigabit link up!
tun1: changing name to 'ovpns1'
bce1: 
bce1: link state changed to UP
bce1_vlan20: link state changed to UP
Gigabit link up!
bce1_vlan40: link state changed to UP
bce1_vlan10: link state changed to UP
bce1_vlan30: link state changed to UP
bce1: Gigabit link up!
pflog0: promiscuous mode enabled
ovpns1: link state changed to UP
bce0: promiscuous mode enabled
bce1: promiscuous mode enabled
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 2, addr 5 (disconnected)
ugen1.5: <dell> at usbus1
ukbd1: <dell 0="" 5="" dell="" usb="" entry="" keyboard,="" class="" 0,="" rev="" 1.10="" 1.15,="" addr=""> on usbus1
kbd2 at ukbd1
ugen1.6: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 6="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.6: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 2, addr 6 (disconnected)
ugen1.6: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 6="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <dell> at usbus1 (disconnected)
ukbd1: at uhub4, port 1, addr 5 (disconnected)
ng0: changing name to 'ppp0'
ugen1.6: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 2, addr 6 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
tun0: link state changed to UP
tun0: link state changed to DOWN
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ng0: changing name to 'ppp0'
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ng0: changing name to 'ppp0'
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
u3g0: at uhub4, port 1, addr 5 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected)
ugen1.5: <sierra wireless,="" incorporated=""> at usbus1
u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1
u3g0: Found 5 ports.
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'</sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></dell></sierra></sierra></sierra></sierra></sierra></dell></dell></sierra></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></teac></ahci></samsung></sierra></sierra></vendor></vendor></logitech></logitech></logitech></vendor></vendor></vendor></vendor></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></generic></system></isa></ahci></ahci></ahci></ahci></ahci></ahci></ahci></intel></isa></pci-isa></vga-compatible></acpi></acpi></intel></bcm5709></mii></qlogic></bcm5709></mii></qlogic></acpi></acpi></intel></intel(r)></intel(r)></pci></pci-pci></intel(r)></intel(r)></pci></pci-pci></pci></pci-pci></acpi></acpi></acpi></acpi></high></at></at></acpi></acpi></acpi></acpi></dell></software></software,></version></dell ></lahf></syscall,nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>

            I will try Ubuntu later today at home and post back.

            Finally, IPv6 is disabled, global and on each interface. I was puzzled myself, why it would show up.

            I hope this helps.

            1 Reply Last reply Reply Quote 0
            • ?
              Guest last edited by

              So that sounds like the data channel if it says that. Try other ports. Maybe start over and figure out the USB port before you make an PPP device because there is an mpd5 script that runs on first setup..Usually Sierra devices use the next to last interface, so on an MC7700 it is always cuaU0.4.

              1 Reply Last reply Reply Quote 0
              • ?
                Guest last edited by

                If it says Connected and locks up it is defiantly not the right port. You have working hardware you just need to find the AT channel. When it does come up in the terminal cu -you will need to hit AT and return button a couple of times until it is returning AT onscreen. Then type ATZ. Then just to checkout the device issue this command - ATI. Info shows you much goodies even firmware version you can see. When you get this figured out then proceed to make your PPP device with the proper port under the gui.

                1 Reply Last reply Reply Quote 0
                • ?
                  Guest last edited by

                  The ubuntu is not needed if you have CU running. It will show different TTY and just confuse things. It wass good for last ditch effort.
                  What you need is what I said above but try other interfaces with CU. Try  cu -l /dev/cuaU0.4  to start then maybe /dev/cuaU0.2 and try them all. The -next to last- interface is the tip from Whirlpool.AU forum and stands pretty true to date for me with Sierra.

                  1 Reply Last reply Reply Quote 0
                  • E
                    eddi1984 last edited by

                    Hi,

                    I double checked some settings, and after testing with the cu command, the cuaU0.3 is defiantly the right channel.
                    This is what I get running the cu command and than ATI:

                    
[2.2.4-RELEASE][admin@pfSense]/root: cu -l /dev/cuaU0.3
Connected
at
OK
ati
Manufacturer: Sierra Wireless, Incorporated
Model: AC763S
Revision: SWI9200H2_03.05.11.00AP R5145 CARMD-EN-10527 2012/05/24 15:10:56
IMEI: 0130
IMEI SV: 8
FSN: CDX2810
3GPP Release 8
+GCAP: +CGSM,+DS,+ES

OK

                    And I get the same behaviour that I posted earlier. Stops at the same spot and has IPv6 requests.

                    So these are my questions:

                    • Why does the PPP request a IPv6 (I have IPv6 off in Advanced Config and for each interface. It should not ask for IPv6
                    • It stops at the "ppp: [opt1_link0] MODEM: can't ioctl(TIOCMGET) /dev/cuaU0.3: Device not configured", WHY?

                    It seems like it should work and is streight forward, but something is blocking it. Anybody an idea how I can deactivate the IPv6 request in PPP protocol?

                    Any further suggestins for testing?

                    Cheers,

                    Eddi

                    1 Reply Last reply Reply Quote 0
                    • ?
                      Guest last edited by

                      Well i finally see what the device is, Qualcom 9200 which is the same as the the MC7700. Is it possible there is something in the Mifi contributing? If not be advised the PPP settings are in a file that corresponds to your interface -not under PPP.conf..
                      Mpd5 is used as a daemon. It uses a file named like this OPT1_link.mpd5 deep down under  /usr/etc/ structure.

                      Have you tried to flash it to the latest DIP mode firmware. I see some negative posts on the firmwares elsewhere. Sierra has still been updating the firmware for the MC7700 and actually added features. Yours has the initial firmware from 2012.

                      That said I don't see anybody else here using the device.

                      1 Reply Last reply Reply Quote 0
                      • ?
                        Guest last edited by

                        Here is a trick from another thread:

                        If you try this setting it bypasses some of the modem script.

                        PPPconfig>>show advanced>>modem init string:+CFUN=1

                        1 Reply Last reply Reply Quote 0
                        • E
                          eddi1984 last edited by

                          @Phishfry:

                          Well i finally see what the device is, Qualcom 9200 which is the same as the the MC7700. Is it possible there is something in the Mifi contributing? If not be advised the PPP settings are in a file that corresponds to your interface -not under PPP.conf..
                          Mpd5 is used as a daemon. It uses a file named like this OPT1_link.mpd5 deep down under  /usr/etc/ structure.

                          Have you tried to flash it to the latest DIP mode firmware. I see some negative posts on the firmwares elsewhere. Sierra has still been updating the firmware for the MC7700 and actually added features. Yours has the initial firmware from 2012.

                          That said I don't see anybody else here using the device.

                          I will look for the mpd5 file and see what I can dig up. As to the firmware, the device is locked to the provider (TELUS) … so I probably cannot flash the latest DIP firmware on it. Would you have a download/description link?

                          @Phishfry:

                          Here is a trick from another thread:

                          If you try this setting it bypasses some of the modem script.

                          PPPconfig>>show advanced>>modem init string:+CFUN=1

                          I will try this setting.

                          Thank you for all your help so far!! It is really appreciated!

                          1 Reply Last reply Reply Quote 0
                          • ?
                            Guest last edited by

                            Here is where they added ipv6 to pfSense mpd5
                            https://forum.pfsense.org/index.php?topic=32721.msg171835#msg171835

                            I see some PROTOCOMP and ACFCOMP in the PPP log as well. I thought that was disabled under ppp.conf

                            Is it possible your cell provider is using ipv6 and the error is from that?

                            I have a Windows utility for switching modes from Sierra. Send me a PM if needed. I would try and put it in DIP mode just to make sure. If device is in QMI mode there may be a AT console available as well so you need to ensure DIP mode. If you look at the Sierra pdf's there is a way to switch it with AT commands as well.

                            Try this command under CU-  AT!UDINFO? and post results.

                            Are you running pfSense on bare metal?

                            1 Reply Last reply Reply Quote 0
                            • E
                              eddi1984 last edited by

                              Are you running pfSense on bare metal?

                              Yes its running on bare metal.

                              I see some PROTOCOMP and ACFCOMP in the PPP log as well. I thought that was disabled under ppp.conf

                              Is it possible your cell provider is using ipv6 and the error is from that?

                              I will check the ppp.conf and disable all 3, if I can find them.

                              I have a Windows utility for switching modes from Sierra. Send me a PM if needed. I would try and put it in DIP mode just to make sure. If device is in QMI mode there may be a AT console available as well so you need to ensure DIP mode. If you look at the Sierra pdf's there is a way to switch it with AT commands as well.

                              I don't understand the DIP mode, will have to do some reading. I tried to load a new firmware last night, but I can only get them from the provider, and as you have pointed out, they are old. I wish I could load the stock Sierra Wireless firmware on it but the device is locked.

                              Try this command under CU-  AT!UDINFO? and post results.

                              I will try this tonight and report back.

                              That said I don't see anybody else here using the device.

                              Its a hotspot and I can get it fairly cheap on kijiji. Its also practical, because, when I go camping, I can take it with me and have wifi/internet in the trailer. Would be nice, if I could stick to it.
                              I am also thinking of going another route and using a RaspPi (have a model B that I don't use) and than just bridge the WAN to the Ethernet port. But it would have to be a transparent bridge. Would be nicer to have it working in pfsense.

                              Thank you so far, I will report back.

                              1 Reply Last reply Reply Quote 0
                              • ?
                                Guest last edited by

                                I am not fully versed in the PPP stuff either. I am pretty sure that pfSense ignores the ppp.conf file.. So i think only file to edit is the mpd5 file. This edit will not survive OS upgrades either.

                                1 Reply Last reply Reply Quote 0
                                • ?
                                  Guest last edited by

                                  Did you note this line from the 2011 post

                                  I needed to add the line "set bundle enable ipv6cp" somewhere in the mpd5 config in order to allow it to accept ipv6cp config from my ISP.

                                  Might want to try enable/disable there.

                                  1 Reply Last reply Reply Quote 0
                                  • First post
                                    Last post

                                  Products

                                  • Platform Overview
                                  • TNSR
                                  • pfSense
                                  • Appliances

                                  Services

                                  • Training
                                  • Professional Services

                                  Support

                                  • Subscription Plans
                                  • Contact Support
                                  • Product Lifecycle
                                  • Documentation

                                  News

                                  • Media Coverage
                                  • Press
                                  • Events

                                  Resources

                                  • Blog
                                  • FAQ
                                  • Find a Partner
                                  • Resource Library
                                  • Security Information

                                  Company

                                  • About Us
                                  • Careers
                                  • Partners
                                  • Contact Us
                                  • Legal
                                  Our Mission

                                  We provide leading-edge network security at a fair price - regardless of organizational size or network sophistication. We believe that an open-source security model offers disruptive pricing along with the agility required to quickly address emerging threats.

                                  Subscribe to our Newsletter

                                  Product information, software announcements, and special offers. See our newsletter archive to sign up for future newsletters and to read past announcements.

                                  © 2021 Rubicon Communications, LLC | Privacy Policy