Ive got a problem! Cant access Server network from Lan network



  • HI there..

    I got a bit of a problem.

    I have one lan network and one Server network.

    Lan network is on 192.168.0.0/24 and server network is on 192.168.1.0/24. Both is able to connect to the internet but not to each other. I cant ping my normal computer from the server and vise versa.

    LAN interface (fxp0)
    Status 	up
    MAC address 	00:08:c7:f3:1c:c8
    IP address 	192.168.0.1  
    Subnet mask 	255.255.255.0
    Media 	100baseTX <full-duplex>In/out packets 	5315/7076 (898 KB/6.07 MB)
    In/out errors 	0/0
    Collisions 	0</full-duplex> 
    
    Serv interface (fxp2)
    Status 	up
    MAC address 	00:50:8b:ac:52:1e
    IP address 	192.168.2.1  
    Subnet mask 	255.255.255.0
    Media 	100baseTX <full-duplex>In/out packets 	0/0 (0 bytes/32 KB)
    In/out errors 	0/0
    Collisions 	0</full-duplex> 
    

    and the rules

    Server side

    
    *  	 *  	 *  	 *  	 *  	 *  	   
    *  	 Serv net  	 *  	 LAN net  	 *  	 *
    
    

    Lan side

    
    *  	 *  	 *  	 *  	 *  	 *  	    	  
    *  	 LAN net  	 *  	 Serv net  	 *  	 *  	    	
    
    

    What shall i do to solv this problem? I have just done a fresh install.



  • Recheck every clients used and unused network card setting, maybe a wrong gateway or could it be a client firewall



  • I have deactivated both Windows Vistas firewall and Windows 2003 firewall.

    In the normal/server computer there is only one network card.



  • I can ping 192.168.0.1 from the server and i can ping 192.168.2.1 from my normal computer.

    But i cant ping either client (192.168.0.2 and 192.168.2.2)



  • Can the computers get to the Internet?  What is their default gateway?



  • Both the computers can connect to the internet.

    Gateway is 192.168.0.1 for the LAN and 192.168.2.1 for the server



  • What happends if i put the BOLD rules first? Will there be any difference

    Server side

    *  *  *  *  *  *     
    ***  Serv net  *  LAN net  *  ***

    Lan side

    *  *  *  *  *  *       
    ***  LAN net  *  Serv net  *  *     **

    Edit: Nothing at all happend.. Did a Reset State to..



  • Can you provide a network diagram?  Are you running pfSense 1.2?

    Have you changed any of the default settings, like disabling the automatic Outbound NAT?



  • @Cry:

    Can you provide a network diagram?  Are you running pfSense 1.2?

    Have you changed any of the default settings, like disabling the automatic Outbound NAT?

    I can´t provide a network diagram at the moment. (I´m at work)

    Yepp, i´m running pfsense 1.2. Nope, i havent change any of the default settings.

    Edit: Done a diagram now..




  • Any one?


Log in to reply