Set-up seeing PCIe Gigabit but not motherboard ethernet…
-
I VERY NEW to this ;D. Im trying to set up for first time. I using an I3 desktop with 4gb ram and 64gig SSD card. It has a RJ45 port on the motherboard and I installed a PCIe gigabit card. When I get to the point to set my lan/wan it only sees the PCIe card and not the one on the motherboard. Also shows"
re0 :link state changed to DOWN
re1 : link state changed to DOWNNext line shows:
Valid interfaces are:
re0 : (shows MAC and the pcie card)
re1 : (also shows the pcie card but a different mac address)Any ideas?
-
Is it possible they are both Realtec interfaces?
-
Is it possible they are both Realtec interfaces?
They both show PCIe Gigabit :-\ …yet 2 different MACs ....
-
:-\ Maybe it's because the onboard adapter is also connected to the PCI-E bus
Or your PCI-E adapter is a dual port card ?
-
FIXED!
Yea….motherboard was same... ;D
I took out the PCIe card and ran the live cd again. This time only showed the one PCIe (re0). Thanks for your quick help!