2 WAN - 2 LAN - Portforwarding
-
Hi, sorry for the late reply (work you know).
I see you made some progress but still have some issues to solve so let's try to do so.Could you check via Diagnostics>Routes what interface the 'default' route points to. I know that you already mentioned you didn't select default on the Gateways but the system likely has chosen one for you :). My guess is that it is the WAN1 interface that is set as 'default'.
If this is the case you could try following: System>Advanced>Miscellaneous under Load Balancing tick 'Enable default gateway switching'.
This should give following situation:
Normal conditions (all WAN UP):
LAN1->WAN1, LAN2->WAN2 and the firewall itself (dns) -> default=WAN1
Error condition (WAN1 DOWN):
LAN1->No Internet,LAN2->WAN2, firewall (dns) -> WAN2 -
WAN1 & WAN2 has the same GW. My servers is Dedicated and the two Internet that i have is the same. the only different is that they have different WAN IP.
For the switching suggestion, i already check it.
i can not fully understand the other thinks that you wrote…
thanks a lot for your time...