@gertjan Thanks. Yeah, I was not really expecting a positive answer to be honest. Well, I guess I have no choice, just have to keep the current method. Thanks again.

Perfect! That worked - thank you :)

Not sure if this is supported by the openvpn binary you can check it on https://community.openvpn.net/openvpn/report/

@kom Thanks for the fast reply. Allow rule is OK and logs shows no error. I'll try a clean instalation and configuration.

@viragomann thanks for answers!

@albgen said in OpenVPN - only one user has issues: @cswroe said in OpenVPN - only one user has issues: Actually had this happen with a couple users recently. I ended up removing them and adding them back as users, then downloaded are reinstalled the new certs. They have been fine since then. Good Luck. well at least you had a solution. Will try giving another user :) hi, just to update that giving the user another/new openvpn configuration, did not recieved any other compain. Pretty wierd stuff

@stephenw10 @johnpoz Hi guys, can any of you help me to fix these openvpn errors? Thank you

@squeezy .... bump please..... I have same issue. Thanks

@bingo600 said in How to send email after openvpn has connected successfully: https://forum.netgate.com/post/950706 Tks for the reply bingo, I'll take a look at the topic and yes, it is already configured to send email from pfsense

I forgot to mention: We are using SG-4860 appliances and did not have the problem with 21.02.1 or older versions. Maximum number of simultaneously connected oVPN clients is around 150 to 170, but problem also occurs with ~30 clients only. We use 500MBit fiber for our ISP connection and are far from reaching its limits: [image: 1620045237848-eafc80f5-c45a-4cd5-8af6-a4c770f3ccd5-image.png] System is also not too busy: [image: 1620045202151-48fbaaf1-d4f7-4c49-9940-d0d507bb331a-image.png]

@dementian I started with 2.4 and upgraded to 2.5 with the same problem. Then did a fresh install of 2.5 (lost wirguard!) and still got the same problem..

After a lot of research, I was able to find the error after a long time. It was because my password was too long. The login on the website worked, but not via openVPN. I am currently still unclear why it did not work. However, I can already confirm that it works without errors with a slightly shorter one.

@ddbnj Nice to have "helped" ... Or NOT Glad i'm still on 2.4.5-p1 , and not chasing "ghosts" /Bingo

@huskerdu The difference is, when you copy it, you have two rules, the original one and one on the new tab. When you move it, there is only the rule on the new tab, but the original one no longer exists.

Fixed by creating another LDAP auth server and entering the same config as before ... I will diff that in detail, for now: works!

@dannyr1992 We have managed to get the Firewalls to communicate. Turns out it was compressions settings which is madness. Even thought the firewalls are communicating and the routing table is correct the LANS cannot communicate with each other. Does anyone have any ideas

Does anyone else face this issue, or has an idea where to start solving this issue?