• pfSense plus registration "disappeared"

    3
    0 Votes
    3 Posts
    179 Views
    stephenw10S

    Send me the NDI and order number in chat and I can check it.

    Steve

  • 0 Votes
    20 Posts
    2k Views
    Z

    @Gertjan alright I will find out. Thou thanks for the help u had given me. Have a good day

  • Alexa requests not completing

    21
    0 Votes
    21 Posts
    2k Views
    C

    @guyonabuffalo I had a similar issue night before last. "Alexa, play the bridge on SiriusXM".
    She said "Ok, playing..." and then silence. What? Is the station off the air?? Tried another station but no luck.

    This morning I was working in my office and I heard about 10-15 seconds of music from the echo there where I had tried playing before.
    While I was investigating I heard about 5-10 seconds of it a couple of times.
    I restarted my firewall but still silence.
    I created a rule to permit RTP (TCP/UDP) on WAN from any to any but still silence on my living room echo,
    I reset the SiriusXM skill but still silence after asking again.
    Then I tried asking on my office echo and it worked.
    Tried again in living room but silence so I restarted the echo and then it worked.

    In the end I wonder if just restarting the living room echo would have fixed it.
    I'll may never know but if it happens again, I'll start with restarting the device, then try other devices, then reset the skill, finally the firewall...

  • Intermittent IPsec tunnel interruption between 2 Pfsense

    7
    0 Votes
    7 Posts
    451 Views
    K

    Hello stephenw10 ,

    I wanted to wait to be sure but I no longer have any disconnection from this IPsec bridge.
    When I reduced the delay to 1 hour, I no longer had this problem, but therefore no more logs :)
    So I postponed the 8 hour delay to have this cut again, but it no longer cuts!

    So too bad for the explanation, I'll look at the logs if it comes back.

    A big thank you to you for your answers <3

  • Weird Browser lock up

    21
    0 Votes
    21 Posts
    1k Views
    stephenw10S

    What's in that ICMP packet? I expect that to be a port denied message.

  • LDAPs AD bind

    27
    0 Votes
    27 Posts
    8k Views
    S

    Hi guys!

    It's been a lot since the last response to this.
    After updating to 2.7.2, can't get to make work ldaps again (updated from 2.7.0).

    By running this commands:

    setenv LDAPTLS_REQCERT allow ldapsearch -v -H "ldaps://dc1.local:636" -b "dc=local" -s sub -D "username@local" -w "password"

    seems to work because it shows so much information about my directory.
    But it does not work when trying to authenticate on GUI. I have restart PHP-FPM so many times with no success.

    Please advice.

    Thank you!

  • Where is pfSense support for HTTP/3 and QUIC protocol support?

    Moved
    91
    0 Votes
    91 Posts
    23k Views
    JonathanLeeJ

    @stephenw10 I can the pcap on pfsense.

    HTTP/3 is no longer experimental and is fully active in the iMac it can no longer be disabled manually

    2017--> was still in development
    Screenshot 2024-07-10 at 20.05.52.png

    2021--> This was the background and code for how it works with applications
    https://developer.apple.com/videos/play/wwdc2021/10094/?time=16

    2024--> Apple has fully activated this on the Sonoma 14.5 and Safari 17.5 it has no option to disable like the link above has.

    It also has HTTP/3 DNS much like DoH however pure UDP let's call it DoH/3

    DoH/3 seen here:
    f065612b-98b0-4959-9e37-68c032208922-image.png

  • Slow Download Speeds

    9
    0 Votes
    9 Posts
    494 Views
    F

    @stephenw10

    LOL, yeah and aptly named too!

    It actually attempts to serve a purpose as it offers QoS options for gaming, but the Killer Performance Suite is generally considered nuisance-ware. I thought I had uninstalled all that a long time ago, but apparently that service was hanging around. :) I simply didn't realize it as I've been on much slower internet until gig came to the neighborhood. :)

    Jeff

  • 0 Votes
    2 Posts
    422 Views
    stephenw10S

    If you have set that I would expect no issue since the server would reject any unauthenticated requests.

  • Erro Register and Package after new install and recover backup

    5
    0 Votes
    5 Posts
    175 Views
    P

    @stephenw10 You are sure.
    I didn't remember this configuration.
    Sorry for forgetting and thank you.

  • Recreate Monitoring rdd files

    3
    0 Votes
    3 Posts
    205 Views
    R

    Hi @stephenw10
    Thanks your post pointed me to where to restart the monitoring service.
    My google searches were failing me.. Everything I found said that restarting it was some where under the System -> Advanced Settings area. But I couldn't find it.
    However it's under that Status -> Monitoring -> Settings ->"Display Advanced" button..
    Sigh. Now I know the term to search for it's easy..
    After disabling and enabling Graphing again it's fixed!

    Cheers
    Richard

  • VPN just suddenly down

    12
    0 Votes
    12 Posts
    557 Views
    T2M5T

    @JonathanLee

    75620283-fd7d-4b05-9a7b-227e657c48a1-image.png

    No more, good work !

  • Netgate 7100 with HA update issues

    22
    0 Votes
    22 Posts
    2k Views
    N

    @stephenw10 I sent you a chat

  • 2.7.2-RELEASE GRE Tunnel problem

    11
    0 Votes
    11 Posts
    421 Views
    stephenw10S

    Aha, nice!

  • How to force whole-network Tor with LAN -> Tor -> WAN configuration?

    48
    1 Votes
    48 Posts
    50k Views
    JonathanLeeJ

    Is this similar to proxy chains or apples private relay services?

  • Pfsense 2.6.0 freeze randomly

    6
    0 Votes
    6 Posts
    314 Views
    JKnottJ

    @net95 said in Pfsense 2.6.0 freeze randomly:

    For now, we cannot update because we cannot interrupt the services

    I used to be a computer tech, working on big systems, and also worked in telecom for many years. When a critical system had to be updated, etc., common practice was to do it after hours. I've been in at 4AM and even came in on New Years day for Y2K. If your firewall is freezing it's likely a hardware issue and could fail completely at any time. Also, updating doesn't take much time. If done during the business day, common practice is to just let everyone know there will be a brief outage.

  • Haproxy and acme setup for TLS inspection

    3
    0 Votes
    3 Posts
    193 Views
    C

    @NollipfSense Thanks

  • Netgate 1100 reset admin password

    4
    0 Votes
    4 Posts
    369 Views
    stephenw10S

    What log did you see that implies the password had changed?

    I would guess a more likely explanation is that there were some login failures caused by the new login limitation?

  • CISCO Router Config

    4
    0 Votes
    4 Posts
    231 Views
    JKnottJ

    @Vinibo1

    Why not state the requirements, instead of posting the Cisco config? I see you have NAT and VLANs and some addresses. Also, what about IPv6? A lot of ISPs are providing that these days.

  • Unable to create OPT interfaces on Protectli FW2B

    2
    0 Votes
    2 Posts
    102 Views
    patient0P

    @antrock85 The FW2B got two physical interfaces. Installing pfSense, one will be assigned as the WAN and the other as the LAN interfaces. That's all the pyhsical interfaces assigned.

    Now you can create a VLAN (Interfaces > Assignments) to have 'more' interfaces, which will show up as OPT, OPT1 and so on.

    But to use it/them you have to know how to work with VLANs.

Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.