I use the package Fit123 with it's DDNS, and cn99 should like this: lynx -mime_header -auth=user : pass "http://www.3322.org/dyndns/update?system=dyndns&hostname=myhost.3322.org" how can I  put them in Fit123's fields? It should fit a string like this https://username:password@updates.opendns.com/nic/update?hostname= AFAIK it's the normal way for those services. How can I find more info about Fit123? Based on http://forum.pfsense.org/index.php/topic,9729.msg55580.html#msg55580 Another way http://forum.pfsense.org/index.php/topic,15482.0.html As those site you use doesn't seems to have a English pages I can't be of much help. but you can searching for ways to use curl or wget

Thanx for the info guys  ;) I have installed the RC1 and got load balance working, but captive portal was not working. The login page would not show. If i enter http://pfsenseip:8000 i can see the login page and proceed from then on normally. If i disable the captive portal everything works OK, but the captive portal is a must and i need it. Besides this how can i apply this http://cvstrac.pfsense.com/chngview?cn=26872 to a 1.2.3 installation? REgards..  :)

A little more information is required.  At the very least why you have to disable the LAN.  What happens if you don't?

I can confirm that the procedure outlined by jimp worked well. I am running 1.2.2… lost the admin password due to a twitchy finger... damn fingers... Step 3: /sbin/mount -a -t ufs

@GruensFroeschli: We already have filtering of OpenVPN in 1.2.3 I was experimenting with this a little today, and while it did work, there were plenty of quirks in getting it to do so… But it does work.

Agree. The explicit rule 'disable broadcast on WAN' should not affect DHCP IP renew process as server responds with unicast not broadcast packets. Sorry for my previous comment, it does not make sence.

Hi, I tried to make half bridge work on OPT1 (apparently Realtek 8139 recognised as rl1) with versions 1.2.1 and 1.2.3-RC1 using two different modems (Linksys AM200 and Zyxel P660R). I was not successful, even if everything worked perfectly with pfsense v1.2. Finally, I put one of the modems on router mode and pfsense in its DMZ and since then everything is working fine. Cheers,

OK. Thank you for responses so far and I'll shoot an email to support :) What I'm interested in is adding firewall rules to the <filter>section of the config.xml without using the WebGui.  We'd like to convert our existing rule bases over to pfsense programmatically.</filter>

thank you. i'll try to make some changes in that file. if it works, i'll let you know :)

@Perry: http://doc.pfsense.org/index.php/Why_can%27t_I_access_forwarded_ports_on_my_WAN_IP_from_my_LAN/OPTx_networks%3F Excellent!  Yeah I knew it was probably something simple that I wasn't seeing.  I was reading docs and searching the forums for hours and not seeing what I needed.  I will give this a try and post back results.  Thanks so much for the speedy response!

Some people (especially gamers) turn off the NAT on the DSL modem and put it into "bridge mode" thereby eliminating one "hop" and double NAT. You should be able to ditch the Linksys router (unless you use it for wireless) but, as Cry Havok points out, you need to keep the DSL modem.

This is pure guess, but under Status -> RRD Graphs -> Settings, there's a "Enables the RRD graphing backend." check box. I'd try un-checking it, saving setting, re-enabling it, save settings. This is kind of a "dumb GUI trick", but things like this sometimes work with GUI's. I have a bit of trouble finding where all of the logs are kept, but checking them is never a bad idea.