Ok I sort of understand. But this brings me to antoher quesiton why wont my forwarded ports work :P I'll create another thread to ask that.

I use the package Fit123 with it's DDNS, and cn99 should like this: lynx -mime_header -auth=user : pass "http://www.3322.org/dyndns/update?system=dyndns&hostname=myhost.3322.org" how can I  put them in Fit123's fields? It should fit a string like this https://username:password@updates.opendns.com/nic/update?hostname= AFAIK it's the normal way for those services. How can I find more info about Fit123? Based on http://forum.pfsense.org/index.php/topic,9729.msg55580.html#msg55580 Another way http://forum.pfsense.org/index.php/topic,15482.0.html As those site you use doesn't seems to have a English pages I can't be of much help. but you can searching for ways to use curl or wget

Thanx for the info guys  ;) I have installed the RC1 and got load balance working, but captive portal was not working. The login page would not show. If i enter http://pfsenseip:8000 i can see the login page and proceed from then on normally. If i disable the captive portal everything works OK, but the captive portal is a must and i need it. Besides this how can i apply this http://cvstrac.pfsense.com/chngview?cn=26872 to a 1.2.3 installation? REgards..  :)

A little more information is required.  At the very least why you have to disable the LAN.  What happens if you don't?

I can confirm that the procedure outlined by jimp worked well. I am running 1.2.2… lost the admin password due to a twitchy finger... damn fingers... Step 3: /sbin/mount -a -t ufs

@GruensFroeschli: We already have filtering of OpenVPN in 1.2.3 I was experimenting with this a little today, and while it did work, there were plenty of quirks in getting it to do so… But it does work.

Agree. The explicit rule 'disable broadcast on WAN' should not affect DHCP IP renew process as server responds with unicast not broadcast packets. Sorry for my previous comment, it does not make sence.

Hi, I tried to make half bridge work on OPT1 (apparently Realtek 8139 recognised as rl1) with versions 1.2.1 and 1.2.3-RC1 using two different modems (Linksys AM200 and Zyxel P660R). I was not successful, even if everything worked perfectly with pfsense v1.2. Finally, I put one of the modems on router mode and pfsense in its DMZ and since then everything is working fine. Cheers,

OK. Thank you for responses so far and I'll shoot an email to support :) What I'm interested in is adding firewall rules to the <filter>section of the config.xml without using the WebGui.  We'd like to convert our existing rule bases over to pfsense programmatically.</filter>

thank you. i'll try to make some changes in that file. if it works, i'll let you know :)