@redbeard: It runs off of a CF card though, so you can't run packages without some extra steps. In that case you could use a Microdrive instead - that's how mine runs @onhel: If you're going to be running packages, like Snort and Squid, you're going to have to bump the RAM up to at least a gig. With Squid, Nut, Imspector, pfflowd, FreeRadius, dnsmasq, dhcpd, miniupnpd, racoon and OpenVPN all running I've not quite used 256 MB of the 512 MB of RAM I've got installed - Snort's the real memory hog. Of course, I'd agree that more memory (and more CPU power) is generally good.

This seems to have worked, although I have to admit I'm not quite sure why. All six interfaces are still sharing IRQs seven and five, just like they were prior to disabling all the unnecessary devices. At any rate, thanks for the suggestion.  :)

beta 2 to rc-1 rc-1 to rc-2 RC

I regret to hear of your death and hope you've got decent Internet access in the afterlife  ;D I suggest you install supported network cards, such as Intel.

@Cry: You'll find a number of posts on the same subject, with very similar answers  ;) True! Shame on me.  ;D Sasa

Hi people is me again. After trying again with my 2WIRE bridge-mode i found the right setting, reading different page from dslreports, everything was right, i just change 1 setting: After i disable the "Routing" stuff from 2WIRE, i change the "Connection Type" from "Direct IP" to PPPoE, setup my user && password. After this, DHCP was disable from 2WIRE, i setup my PfsenseWAN to PPPoE… my pfsense box was online!!! Right now i'm working behind my pfsense, my VPN are working, i can forget about DMZ and all the tricks i have to do to get my box work behind 2WIRE. The ISP technical people, they know about this but don't have any idea how to get this thing to work, they just told me "Sir, if u do that you loose your warranty, bla bla bla  ::) ::) ::) I test the connection, resetting my box, enabling && disabling the WAN NIC and everything is working. Well guys thanks all for your help and advised, lets continue with the show  ;D ;D ;D

Dual Xeon or Core Duo 2 with PCI-E slot PCI-E Dual or Quad port Intel gigabit server adapter (very important!) Yes it will be more pricey but this is how to do it right.

Ok, lets just hope it works. I have some old PATA/IDE-harddrives laying around, so harddrive is no problem to replace. But to buy 2 brand new network cards when i have to good Intel Gbit-NICs on the motherboard would feel wrong :-) If anyone has got the combo of southbridge / network cards working, please write a reply. Thanks for the answer.

I've had one of these for over a year on my production network with a full install on a microdrive. Never had a problem with it. There may be something to the box getting too hot with a SFF IDE HD inside. I have a similar sized passively cooled box that doesn't work reliably with an internal HD and the case closed - it overheats. Haven't tried a HD in my FX5620.

is this a full install or embedded? what pfsense version?

Thanks, Any idea what kind of HP server would be the least expensive, but would have a compatible RAID controller?

If you want the cafe for gaming i suppose you mean also FPS which are better played with low pings. You might consider to use policy based routing and use one of your lines for gaming only. and the other for the rest. If ping is not a concern for you just loadbalance. But you might want to use advanced outbound NAT and use static ports since lot's of games dont like portscrambling. If you want content filtering you might want to take a look at the packages that are availlable. But i think you will need lot's of RAM :) i think with your 2x10 Mbit lines CPU speed wont be a matter.

Haven't heard anything else.  But for what it's worth, I'm not seeing this in FreeBSD 6.2 w/ a couple of the pfSense patches added to our kernel. # netstat -w 10             input        (Total)          output   packets  errs      bytes    packets  errs      bytes colls     868544    0  286227325    865170    0  251535256    0     770774    0  222347441    796016    0  225886191    0     731287    0  224789308    766395    0  231316740    0     767101    0  234638730    798607    0  244245061    0     828549    0  245917253    847273    0  242236942    0     782814    0  235875581    809549    0  238561715    0     743229    0  222066030    776047    0  239061961    0 And the pci-id's of the cards dual port fiber card dev.em.0.%desc: Intel(R) PRO/1000 Network Connection Version - 6.2.9 dev.em.0.%driver: em dev.em.0.%location: slot=1 function=0 dev.em.0.%pnpinfo: vendor=0x8086 device=0x1012 subvendor=0x8086 subdevice=0x1012 class=0x020000 dual port copper card dev.em.2.%desc: Intel(R) PRO/1000 Network Connection Version - 6.2.9 dev.em.2.%driver: em dev.em.2.%location: slot=1 function=0 dev.em.2.%pnpinfo: vendor=0x8086 device=0x1079 subvendor=0x8086 subdevice=0x1179 class=0x020000 –Bill

http://forum.pfsense.org/index.php/topic,2040.0.html did you try ifconfig -m to find out what options are valid? if you dont put them exactly as this command returns it wont work.

problem is solved after i upgrade the BIOS. my case is closed for now.  ;D

Ooops, sorry, but I've solved. With 1.2 RC1 version, it works (seems) fine. Bye