Diagnosing a PFSense Crash Report
-
@solis said in Diagnosing a PFSense Crash Report:
[textdump.tar.1] i am still getting crashes
Where ? What interface ? Did you swap ?
What is :
[textdump.tar.1] -
It could be a bce(4) bug:
https://bugs.freebsd.org/bugzilla/buglist.cgi?quicksearch=%5Bbce%5D -
Mmm, looks like the attachment failed.
Does the crash follow the hardware or is it still on the same pfSense interface?
Steve
-
@stephenw10 no it stay on pfsense
-
@solis textdump.tar.0 check it i change the interface with bce2 but i dnt know maybe this crash report is old
-
Shows:
db:0:kdb.enter.default> show pcpu cpuid = 2 dynamic pcpu = 0xfffffe0080e3d380 curthread = 0xfffff808337bd740: pid 12 tid 100185 "irq257: bce1" curpcb = 0xfffff808337bdce0 fpcurthread = none idlethread = 0xfffff80004084000: tid 100005 "idle: cpu2" curpmap = 0xffffffff8368d5a8 tssp = 0xffffffff837176f0 commontssp = 0xffffffff837176f0 rsp0 = 0xfffffe00ba05fe00 kcr3 = 0x8000000003d03002 ucr3 = 0xffffffffffffffff scr3 = 0x8d1f6f8ae gs32p = 0xffffffff8371df08 ldt = 0xffffffff8371df48 tss = 0xffffffff8371df38 tlb gen = 10148 curvnet = 0 db:0:kdb.enter.default> bt Tracing pid 12 tid 100185 td 0xfffff808337bd740 kdb_enter() at kdb_enter+0x37/frame 0xfffffe00ba05f8d0 vpanic() at vpanic+0x197/frame 0xfffffe00ba05f920 panic() at panic+0x43/frame 0xfffffe00ba05f980 trap_fatal() at trap_fatal+0x391/frame 0xfffffe00ba05f9e0 trap_pfault() at trap_pfault+0x4f/frame 0xfffffe00ba05fa30 trap() at trap+0x286/frame 0xfffffe00ba05fb40 calltrap() at calltrap+0x8/frame 0xfffffe00ba05fb40 --- trap 0xc, rip = 0xffffffff805d97cb, rsp = 0xfffffe00ba05fc10, rbp = 0xfffffe00ba05fc90 --- bce_intr() at bce_intr+0x48b/frame 0xfffffe00ba05fc90 ithread_loop() at ithread_loop+0x23c/frame 0xfffffe00ba05fcf0 fork_exit() at fork_exit+0x7e/frame 0xfffffe00ba05fd30 fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00ba05fd30 --- trap 0, rip = 0, rsp = 0, rbp = 0 ---current process = 12 (irq257: bce1) trap number = 12 panic: page fault cpuid = 2 time = 1643621859 KDB: enter: panic1643621859 is Monday, 31 January 2022 09:37:39
So showing in bce1. But you swapped bce0 with bce2?
<118>WAN -> bce1 <118>LAN -> bce2 <118>OPT1 -> bce3 <118>OPT2 -> bce0It looks like you might have re-assgined all of them....
-
@stephenw10 i did swap lan on bce2 but today my device crash again when i check server display was on boot when boot complete configuration was deleted please help me recent crash report textdump.tar.0 info.0 please help me if possible should i change server or should a create vm server and install on it
-
@stephenw10 textdump.tar.0 info.0 please help latest crash report
-
Are the bce0-3 network interfaces on a PCI card ? if so, you could change the entire card form some other quad NIC Intel based card.
@solis said in Diagnosing a PFSense Crash Report:
recent crash report textdump.tar.0 info.0
Well, you can see it yourself now : line 11 :
curthread = 0xfffff808337bf740: pid 12 tid 100185 "irq257: bce1"IRQ handling for bce1 crashed.
-
@gertjan no its its not pci card its motherboard nic should i change server will it work?
-
I had some NIC's dying on me, during the last 10 years or so. But the were all PCI card NIC's - so, when dead, I swap them.
Your solution : get a good 4 port NIC, put in a 'big' type type device, fire up a VM (Hyper-V on Windows 10 will do, as I know it works as I'm doing that @home) and you install pfSense in the VM : works fine.
Can you tell us what you're using right now ?
-
@gertjan i have installed pfsense directly to raid bootable linux should i change server or just create it on vm it will better with it? with these port because getting nic pci card is not an option for me as i have spare server avaliable
-
@solis said in Diagnosing a PFSense Crash Report:
i have installed pfsense directly to raid bootable linux
Don't know what that is - looks complicated to me.
What about a dedicated device ? Or a VM ?@solis said in Diagnosing a PFSense Crash Report:
should i change server
pfSense is not a server - pfSense doesn't "serve" anything.
It's a router (firewall).@solis said in Diagnosing a PFSense Crash Report:
just create it on vm it will better with it?
If it's ok for you it's ok for me.
Best are these.
Or build your own "motherboard + quand NIC PCI card + power.
Or create a VM, assign 4 NIC ports.
Just my opinion of course.@solis said in Diagnosing a PFSense Crash Report:
is not an option for me as i have spare server avaliable
Wait .... Language issue here ?
You have a spare server device - but that's not an option. Then why even mentioning it ?You issue seesm easy to my :
You have a bad NIC - or multiple bad NIC's.
The NIC are build onto the motherboard, so you have to use another solution.
Pick the one that pleases you most.
No one can say what is "better" - that's up to you.No "help me" PM's please. Use the forum, the community will thank you.
Edit : and where are the logs ?? -
I'm unclear what you swapped here. The crashes were initially in bce0 and now they appear to be in bce1, so that looks like the crash following the assignment.
But you said you swapped bce2?
It could be failing hardware. It could be a bce(4) bug. Either way if you cannot swap out the bce NIC I would suggest installing on something different if you can.
Steve
-
@gertjan sorry for misunderstanding i was trying to say that currently its installed on dell r710 server machine device which have on board 4 nic
