Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Unable to check for updates

    Scheduled Pinned Locked Moved
    Problems Installing or Upgrading pfSense Software
    3
    44
    4.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S
      stephenw10 Netgate Administrator
      last edited by

      Ok, so it can update at the command line.

      Did it upgrade? To 23.05? 23.05.1?

      If not upgrade at the command line: pfSense-upgrade -d

      hugoeyngH 1 Reply Last reply Reply Quote 0
      • hugoeyngH
        hugoeyng @stephenw10
        last edited by

        @stephenw10 Hello. Upgraded (last image). But is still showing "Unable to check for updates"

        Updating repositories metadata...
        Updating pfSense-core repository catalogue...
        Fetching meta.conf: . done
        Fetching packagesite.pkg: . done
        Processing entries: .. done
        pfSense-core repository update completed. 15 packages processed.
        Updating pfSense repository catalogue...
        Fetching meta.conf: . done
        Fetching packagesite.pkg: .......... done
        Processing entries: .......... done
        pfSense repository update completed. 548 packages processed.
        All repositories are up to date.

        The following 9 package(s) will be affected (of 0 checked):

        Installed packages to be UPGRADED:
        pfSense: 23.05 -> 23.05.1 [pfSense]
        pfSense-base: 23.05 -> 23.05.1 [pfSense-core]
        pfSense-boot: 23.05 -> 23.05.1 [pfSense-core]
        pfSense-default-config: 23.05 -> 23.05.1 [pfSense-core]
        pfSense-kernel-pfSense: 23.05 -> 23.05.1 [pfSense-core]
        pfSense-pkg-System_Patches: 2.2.5 -> 2.2.6 [pfSense]
        pfSense-rc: 23.05 -> 23.05.1 [pfSense-core]
        pfSense-repo: 23.05 -> 23.05.1 [pfSense]
        pkg: 1.19.1_1 -> 1.19.1_2 [pfSense]

        Number of packages to be upgraded: 9

        193 MiB to be downloaded.

        **** WARNING ****
        Reboot will be required!!
        Proceed with upgrade? (y/N) y

        Removing vital flag from php82...
        Downloading upgrade packages...
        Updating pfSense-core repository catalogue...
        pfSense-core repository is up to date.
        Updating pfSense repository catalogue...
        pfSense repository is up to date.
        All repositories are up to date.
        Checking for upgrades (9 candidates): ......... done
        Processing candidates (9 candidates): ......... done
        The following 9 package(s) will be affected (of 0 checked):

        Installed packages to be UPGRADED:
        pfSense: 23.05 -> 23.05.1 [pfSense]
        pfSense-base: 23.05 -> 23.05.1 [pfSense-core]
        pfSense-boot: 23.05 -> 23.05.1 [pfSense-core]
        pfSense-default-config: 23.05 -> 23.05.1 [pfSense-core]
        pfSense-kernel-pfSense: 23.05 -> 23.05.1 [pfSense-core]
        pfSense-pkg-System_Patches: 2.2.5 -> 2.2.6 [pfSense]
        pfSense-rc: 23.05 -> 23.05.1 [pfSense-core]
        pfSense-repo: 23.05 -> 23.05.1 [pfSense]
        pkg: 1.19.1_1 -> 1.19.1_2 [pfSense]

        Number of packages to be upgraded: 9

        193 MiB to be downloaded.
        [1/9] Fetching pfSense-base-23.05.1.pkg: .......... done
        [2/9] Fetching pfSense-rc-23.05.1.pkg: .. done
        [3/9] Fetching pfSense-pkg-System_Patches-2.2.6.pkg: .......... done
        [4/9] Fetching pfSense-default-config-23.05.1.pkg: . done
        [5/9] Fetching pfSense-23.05.1.pkg: . done
        [6/9] Fetching pfSense-boot-23.05.1.pkg: .......... done
        [7/9] Fetching pfSense-repo-23.05.1.pkg: . done
        [8/9] Fetching pfSense-kernel-pfSense-23.05.1.pkg: .......... done
        [9/9] Fetching pkg-1.19.1_2.pkg: .......... done
        Checking integrity... done (0 conflicting)

        Downloading pkg...

        No packages are required to be fetched.
        Integrity check was successful.

        Upgrading pfSense-boot...>>> Unmounting /boot/efi...
        umount: /boot/efi: not a file system root directory
        done.
        Upgrading pfSense-rc...
        Checking integrity... done (0 conflicting)
        The following 1 package(s) will be affected (of 0 checked):

        Installed packages to be UPGRADED:
        pfSense-rc: 23.05 -> 23.05.1 [pfSense-core]

        Number of packages to be upgraded: 1
        [1/1] Upgrading pfSense-rc from 23.05 to 23.05.1...
        ===> Setting net.pf.request_maxcount=400000
        [1/1] Extracting pfSense-rc-23.05.1: ......... done

        Upgrading pfSense kernel...
        Checking integrity... done (0 conflicting)
        The following 1 package(s) will be affected (of 0 checked):

        Installed packages to be UPGRADED:
        pfSense-kernel-pfSense: 23.05 -> 23.05.1 [pfSense-core]

        Number of packages to be upgraded: 1
        [1/1] Upgrading pfSense-kernel-pfSense from 23.05 to 23.05.1...
        [1/1] Extracting pfSense-kernel-pfSense-23.05.1: .......... done
        ===> Keeping a copy of current kernel in /boot/kernel.old

        Removing unnecessary packages...
        Checking integrity... done (0 conflicting)
        Nothing to do.
        System is going to be upgraded. Rebooting in 10 seconds.

        Broadcast Message from admin@dmfirewall.datamais.local
        (/dev/pts/0) at 10:20 -03...

        System is going to be upgraded. Rebooting in 10 seconds.

        8b6f60eb-5165-4fa1-96eb-dd46cee8bcbf-image.png

        4e0d1d49-2e0b-4db2-a3e8-6e78ba7e74ee-image.png

        78b223ce-9e04-4ba4-ba01-0e691d08626c-image.png

        1 Reply Last reply Reply Quote 0
        • stephenw10S
          stephenw10 Netgate Administrator
          last edited by

          Do you still see an error when running pkg -d update ?

          hugoeyngH 1 Reply Last reply Reply Quote 0
          • hugoeyngH
            hugoeyng @stephenw10
            last edited by

            @stephenw10 I do not see any error running pkg -d update

            root: pkg -d update
            DBG(1)[86404]> pkg initialized
            Updating pfSense-core repository catalogue...
            DBG(1)[86404]> PkgRepo: verifying update for pfSense-core
            DBG(1)[86404]> Pkgrepo, begin update of '/var/db/pkg/repo-pfSense-core.sqlite'
            DBG(1)[86404]> Request to fetch pkg+https://pfsense-plus-pkg.netgate.com/pfSense_plus-v23_05_1_amd64-core/meta.conf
            DBG(1)[86404]> opening libfetch fetcher
            DBG(1)[86404]> Fetch > libfetch: connecting
            DBG(1)[86404]> Fetch: fetching from: https://pfsense-plus-pkg01.atx.netgate.com/pfSense_plus-v23_05_1_amd64-core/meta.conf with opts "i"
            DBG(1)[86404]> Request to fetch pkg+https://pfsense-plus-pkg.netgate.com/pfSense_plus-v23_05_1_amd64-core/packagesite.pkg
            DBG(1)[86404]> opening libfetch fetcher
            DBG(1)[86404]> Fetch > libfetch: connecting
            DBG(1)[86404]> Fetch: fetching from: https://pfsense-plus-pkg01.atx.netgate.com/pfSense_plus-v23_05_1_amd64-core/packagesite.pkg with opts "i"
            DBG(1)[86404]> Request to fetch pkg+https://pfsense-plus-pkg.netgate.com/pfSense_plus-v23_05_1_amd64-core/packagesite.txz
            DBG(1)[86404]> opening libfetch fetcher
            DBG(1)[86404]> Fetch > libfetch: connecting
            DBG(1)[86404]> Fetch: fetching from: https://pfsense-plus-pkg01.atx.netgate.com/pfSense_plus-v23_05_1_amd64-core/packagesite.txz with opts "i"
            pfSense-core repository is up to date.
            Updating pfSense repository catalogue...
            DBG(1)[86404]> PkgRepo: verifying update for pfSense
            DBG(1)[86404]> Pkgrepo, begin update of '/var/db/pkg/repo-pfSense.sqlite'
            DBG(1)[86404]> Request to fetch pkg+https://pfsense-plus-pkg.netgate.com/pfSense_plus-v23_05_1_amd64-pfSense_plus_v23_05_1/meta.conf
            DBG(1)[86404]> opening libfetch fetcher
            DBG(1)[86404]> Fetch > libfetch: connecting
            DBG(1)[86404]> Fetch: fetching from: https://pfsense-plus-pkg01.atx.netgate.com/pfSense_plus-v23_05_1_amd64-pfSense_plus_v23_05_1/meta.conf with opts "i"
            DBG(1)[86404]> Fetch: fetcher chosen: https
            DBG(1)[86404]> Request to fetch pkg+https://pfsense-plus-pkg.netgate.com/pfSense_plus-v23_05_1_amd64-pfSense_plus_v23_05_1/packagesite.pkg
            DBG(1)[86404]> opening libfetch fetcher
            DBG(1)[86404]> Fetch > libfetch: connecting
            DBG(1)[86404]> Fetch: fetching from: https://pfsense-plus-pkg01.atx.netgate.com/pfSense_plus-v23_05_1_amd64-pfSense_plus_v23_05_1/packagesite.pkg with opts "i"
            DBG(1)[86404]> Request to fetch pkg+https://pfsense-plus-pkg.netgate.com/pfSense_plus-v23_05_1_amd64-pfSense_plus_v23_05_1/packagesite.txz
            DBG(1)[86404]> opening libfetch fetcher
            DBG(1)[86404]> Fetch > libfetch: connecting
            DBG(1)[86404]> Fetch: fetching from: https://pfsense-plus-pkg01.atx.netgate.com/pfSense_plus-v23_05_1_amd64-pfSense_plus_v23_05_1/packagesite.txz with opts "i"
            pfSense repository is up to date.
            All repositories are up to date.

            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              Hmm, do you see packages listed in the package manager in the gui?

              hugoeyngH 1 Reply Last reply Reply Quote 0
              • hugoeyngH
                hugoeyng @stephenw10
                last edited by

                @stephenw10 Yes, I can see. In both of them, in Installed Packages and Available Packages.

                1 Reply Last reply Reply Quote 0
                • stephenw10S
                  stephenw10 Netgate Administrator
                  last edited by

                  Hmm what does pfSense-upgrade -dc show?

                  hugoeyngH 3 Replies Last reply Reply Quote 0
                  • hugoeyngH
                    hugoeyng @stephenw10
                    last edited by stephenw10

                    This post is deleted!
                    1 Reply Last reply Reply Quote 0
                    • hugoeyngH
                      hugoeyng @stephenw10
                      last edited by stephenw10

                      @stephenw10 it shows:

                      /root: pfSense-upgrade -dc
>>> Updating repositories metadata...
Updating pfSense-core repository catalogue...
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
pfSense repository is up to date.
All repositories are up to date.
Your system is up to date

                      I found out that disabling a gateway group where the WAN was "Tier 1", and I setup "Never" for one of them, then worked.

                      b4d39f46-a3a8-4ecc-b640-ef186ff9bcd4-image.png

                      I doesn´t mind what of the WAN I use "ner" in the gateway group, since I leave only one of them as "Tier 1".

                      1 Reply Last reply Reply Quote 0
                      • hugoeyngH
                        hugoeyng @stephenw10
                        last edited by

                        @stephenw10 looking a little bit closer, I found out that

                        90829a24-4c90-4a70-b6bf-8e8e1053279b-image.png

                        If I leave GW_WAN (1) as the the default gateway, it works and, if I leave OPT1GW (2) as default gateway it doesn´t work.

                        Could be something related too DNS?

                        1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          Hmm, that's odd. Also nice catch!

                          Not sure how that only affects the check at the GUI.... Let me dig into it.

                          What happens if you try running pfSense-upgrade -dc from Diag > Command Prompt when GW2 is default? Does it also fail there? What error does it return?

                          hugoeyngH 1 Reply Last reply Reply Quote 0
                          • hugoeyngH
                            hugoeyng @stephenw10
                            last edited by stephenw10

                            @stephenw10

                            Shell Output - pfSense-upgrade -dc

                            >>> Updating repositories metadata...
Updating pfSense-core repository catalogue...
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
pfSense repository is up to date.
All repositories are up to date.
Your system is up to date
                            1 Reply Last reply Reply Quote 0
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by

                              Hmm, and it was showing 'unable to check for updates' on the dashboard at the same time?

                              hugoeyngH 2 Replies Last reply Reply Quote 0
                              • hugoeyngH
                                hugoeyng @stephenw10
                                last edited by

                                @stephenw10 Yes, it was.

                                1 Reply Last reply Reply Quote 0
                                • hugoeyngH
                                  hugoeyng @stephenw10
                                  last edited by

                                  @stephenw10 Hi. How are you?

                                  Some news?

                                  1 Reply Last reply Reply Quote 0
                                  • T tuser11 referenced this topic on
                                  • T
                                    Tom8
                                    last edited by Tom8

                                    Same behavior here.
                                    In my case the second gateway is WAN_DHCP6.
                                    I have to set the default gateway IPv6 to "none", to reach the update page.
                                    Edit: Forgot to mention after update from 2.6 to 2.7!

                                    1 Reply Last reply Reply Quote 0
                                    • stephenw10S
                                      stephenw10 Netgate Administrator
                                      last edited by

                                      Does it work from the command line using either? Like:
                                      pkg-static -d4 update
                                      or
                                      pkg-static -d6 update

                                      You can set the firewall to prefer IPv4 in Sys > Adv > Networking if your system cannot use IPv6 for some reason.

                                      Steve

                                      T 1 Reply Last reply Reply Quote 0
                                      • T
                                        Tom8 @stephenw10
                                        last edited by

                                        @stephenw10
                                        When WAN_DHCP6 is set as second default Gateway:
                                        From Diagnostics > command prompt : pkg-static -d6 update ends in "504 Gateway Timeout"
                                        From SSH: Same, I stopped it....

                                        [2.7.0-RELEASE][admin@pfsense.localdomain]/root: pkg-static -d6 update
DBG(1)[4385]> pkg initialized
Updating pfSense-core repository catalogue...
DBG(1)[4385]> PkgRepo: verifying update for pfSense-core
DBG(1)[4385]> PkgRepo: need forced update of pfSense-core
DBG(1)[4385]> Pkgrepo, begin update of '/var/db/pkg/repo-pfSense-core.sqlite'
DBG(1)[4385]> Request to fetch pkg+https://pkg.pfsense.org/pfSense_v2_7_0_amd64-core/meta.conf
DBG(1)[4385]> opening libfetch fetcher
DBG(1)[4385]> Fetch > libfetch: connecting
DBG(1)[4385]> Fetch: fetching from: https://pkg00-atx.netgate.com/pfSense_v2_7_0_amd64-core/meta.conf with opts "i6"
DBG(1)[4385]> Fetch: fetching from: https://pkg00-atx.netgate.com/pfSense_v2_7_0_amd64-core/meta.conf with opts "i6"
DBG(1)[4385]> Fetch: fetching from: https://pkg00-atx.netgate.com/pfSense_v2_7_0_amd64-core/meta.conf with opts "i6"
DBG(1)[4385]> Request to fetch pkg+https://pkg.pfsense.org/pfSense_v2_7_0_amd64-core/meta.txz
DBG(1)[4385]> opening libfetch fetcher
DBG(1)[4385]> Fetch > libfetch: connecting
DBG(1)[4385]> Fetch: fetching from: https://pkg00-atx.netgate.com/pfSense_v2_7_0_amd64-core/meta.txz with opts "i6"
DBG(1)[4385]> Fetch: fetching from: https://pkg00-atx.netgate.com/pfSense_v2_7_0_amd64-core/meta.txz with opts "i6"
DBG(1)[4385]> Fetch: fetching from: https://pkg00-atx.netgate.com/pfSense_v2_7_0_amd64-core/meta.txz with opts "i6"
pkg-static: https://pkg00-atx.netgate.com/pfSense_v2_7_0_amd64-core/meta.txz: Operation timed out
repository pfSense-core has no meta file, using default settings
DBG(1)[4385]> Request to fetch pkg+https://pkg.pfsense.org/pfSense_v2_7_0_amd64-core/packagesite.pkg
DBG(1)[4385]> opening libfetch fetcher
DBG(1)[4385]> Fetch > libfetch: connecting
DBG(1)[4385]> Fetch: fetching from: https://pkg00-atx.netgate.com/pfSense_v2_7_0_amd64-core/packagesite.pkg with opts "i6"
DBG(1)[4385]> Fetch: fetching from: https://pkg00-atx.netgate.com/pfSense_v2_7_0_amd64-core/packagesite.pkg with opts "i6"
DBG(1)[4385]> Fetch: fetching from: https://pkg00-atx.netgate.com/pfSense_v2_7_0_amd64-core/packagesite.pkg with opts "i6"
pkg-static: https://pkg00-atx.netgate.com/pfSense_v2_7_0_amd64-core/packagesite.pkg: Operation timed out
DBG(1)[4385]> Request to fetch pkg+https://pkg.pfsense.org/pfSense_v2_7_0_amd64-core/packagesite.txz
DBG(1)[4385]> opening libfetch fetcher
DBG(1)[4385]> Fetch > libfetch: connecting
DBG(1)[4385]> Fetch: fetching from: https://pkg00-atx.netgate.com/pfSense_v2_7_0_amd64-core/packagesite.txz with opts "i6"
DBG(1)[4385]> Fetch: fetching from: https://pkg00-atx.netgate.com/pfSense_v2_7_0_amd64-core/packagesite.txz with opts "i6"
DBG(1)[4385]> Fetch: fetching from: https://pkg00-atx.netgate.com/pfSense_v2_7_0_amd64-core/packagesite.txz with opts "i6"
pkg-static: https://pkg00-atx.netgate.com/pfSense_v2_7_0_amd64-core/packagesite.txz: Operation timed out
Unable to update repository pfSense-core
Updating pfSense repository catalogue...
DBG(1)[4385]> PkgRepo: verifying update for pfSense
DBG(1)[4385]> PkgRepo: need forced update of pfSense
DBG(1)[4385]> Pkgrepo, begin update of '/var/db/pkg/repo-pfSense.sqlite'
DBG(1)[4385]> Request to fetch pkg+https://pkg.pfsense.org/pfSense_v2_7_0_amd64-pfSense_v2_7_0/meta.conf
DBG(1)[4385]> opening libfetch fetcher
DBG(1)[4385]> Fetch > libfetch: connecting
DBG(1)[4385]> Fetch: fetching from: https://pkg01-atx.netgate.com/pfSense_v2_7_0_amd64-pfSense_v2_7_0/meta.conf with opts "i6"
DBG(1)[4385]> Fetch: fetching from: https://pkg01-atx.netgate.com/pfSense_v2_7_0_amd64-pfSense_v2_7_0/meta.conf with opts "i6"
DBG(1)[4385]> Fetch: fetching from: https://pkg01-atx.netgate.com/pfSense_v2_7_0_amd64-pfSense_v2_7_0/meta.conf with opts "i6"
DBG(1)[4385]> Request to fetch pkg+https://pkg.pfsense.org/pfSense_v2_7_0_amd64-pfSense_v2_7_0/meta.txz
DBG(1)[4385]> opening libfetch fetcher
DBG(1)[4385]> Fetch > libfetch: connecting
DBG(1)[4385]> Fetch: fetching from: https://pkg01-atx.netgate.com/pfSense_v2_7_0_amd64-pfSense_v2_7_0/meta.txz with opts "i6"
DBG(1)[4385]> Fetch: fetching from: https://pkg01-atx.netgate.com/pfSense_v2_7_0_amd64-pfSense_v2_7_0/meta.txz with opts "i6"
DBG(1)[4385]> Fetch: fetching from: https://pkg01-atx.netgate.com/pfSense_v2_7_0_amd64-pfSense_v2_7_0/meta.txz with opts "i6"
pkg-static: https://pkg01-atx.netgate.com/pfSense_v2_7_0_amd64-pfSense_v2_7_0/meta.txz: Operation timed out
repository pfSense has no meta file, using default settings
DBG(1)[4385]> Request to fetch pkg+https://pkg.pfsense.org/pfSense_v2_7_0_amd64-pfSense_v2_7_0/packagesite.pkg
DBG(1)[4385]> opening libfetch fetcher
DBG(1)[4385]> Fetch > libfetch: connecting
DBG(1)[4385]> Fetch: fetching from: https://pkg01-atx.netgate.com/pfSense_v2_7_0_amd64-pfSense_v2_7_0/packagesite.pkg with opts "i6"
DBG(1)[4385]> Fetch: fetching from: https://pkg01-atx.netgate.com/pfSense_v2_7_0_amd64-pfSense_v2_7_0/packagesite.pkg with opts "i6"
^C

                                        From Diagnostics > command prompt : pkg-static -d4 update works
                                        From SSH:

                                        [2.7.0-RELEASE][admin@pfsense.localdomain]/root: pkg-static -d4 update
DBG(1)[31958]> pkg initialized
Updating pfSense-core repository catalogue...
DBG(1)[31958]> PkgRepo: verifying update for pfSense-core
DBG(1)[31958]> Pkgrepo, begin update of '/var/db/pkg/repo-pfSense-core.sqlite'
DBG(1)[31958]> Request to fetch pkg+https://pkg.pfsense.org/pfSense_v2_7_0_amd64-core/meta.conf
DBG(1)[31958]> opening libfetch fetcher
DBG(1)[31958]> Fetch > libfetch: connecting
DBG(1)[31958]> Fetch: fetching from: https://pkg01-atx.netgate.com/pfSense_v2_7_0_amd64-core/meta.conf with opts "i4"
DBG(1)[31958]> Fetch: fetcher chosen: https
DBG(1)[31958]> Request to fetch pkg+https://pkg.pfsense.org/pfSense_v2_7_0_amd64-core/packagesite.pkg
DBG(1)[31958]> opening libfetch fetcher
DBG(1)[31958]> Fetch > libfetch: connecting
DBG(1)[31958]> Fetch: fetching from: https://pkg01-atx.netgate.com/pfSense_v2_7_0_amd64-core/packagesite.pkg with opts "i4"
DBG(1)[31958]> Fetch: fetcher chosen: https
DBG(1)[31958]> Request to fetch pkg+https://pkg.pfsense.org/pfSense_v2_7_0_amd64-core/packagesite.txz
DBG(1)[31958]> opening libfetch fetcher
DBG(1)[31958]> Fetch > libfetch: connecting
DBG(1)[31958]> Fetch: fetching from: https://pkg01-atx.netgate.com/pfSense_v2_7_0_amd64-core/packagesite.txz with opts "i4"
DBG(1)[31958]> Fetch: fetcher chosen: https
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
DBG(1)[31958]> PkgRepo: verifying update for pfSense
DBG(1)[31958]> PkgRepo: need forced update of pfSense
DBG(1)[31958]> Pkgrepo, begin update of '/var/db/pkg/repo-pfSense.sqlite'
DBG(1)[31958]> Request to fetch pkg+https://pkg.pfsense.org/pfSense_v2_7_0_amd64-pfSense_v2_7_0/meta.conf
DBG(1)[31958]> opening libfetch fetcher
DBG(1)[31958]> Fetch > libfetch: connecting
DBG(1)[31958]> Fetch: fetching from: https://pkg01-atx.netgate.com/pfSense_v2_7_0_amd64-pfSense_v2_7_0/meta.conf with opts "i4"
DBG(1)[31958]> Fetch: fetcher chosen: https
Fetching meta.conf: 100%    163 B   0.2kB/s    00:01
DBG(1)[31958]> Request to fetch pkg+https://pkg.pfsense.org/pfSense_v2_7_0_amd64-pfSense_v2_7_0/packagesite.pkg
DBG(1)[31958]> opening libfetch fetcher
DBG(1)[31958]> Fetch > libfetch: connecting
DBG(1)[31958]> Fetch: fetching from: https://pkg01-atx.netgate.com/pfSense_v2_7_0_amd64-pfSense_v2_7_0/packagesite.pkg with opts "i4"
DBG(1)[31958]> Fetch: fetcher chosen: https
Fetching packagesite.pkg: 100%  155 KiB 159.1kB/s    00:01
DBG(1)[31958]> PkgRepo: extracting packagesite.yaml of repo pfSense
DBG(1)[46734]> PkgRepo: extracting signature of repo in a sandbox
DBG(1)[31958]> Pkgrepo, reading new packagesite.yaml for '/var/db/pkg/repo-pfSense.sqlite'
Processing entries: 100%
pfSense repository update completed. 531 packages processed.
All repositories are up to date.

                                        If I turn off the second gateway, everything is running (except IPv6)

                                        "You can set the firewall to prefer IPv4 in Sys > Adv > Networking if your system cannot use IPv6 for some reason." >>>> I know that, Thank you.

                                        1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          There is IPv6 connectivity to the pkg servers:

                                          [2.7.0-RELEASE][admin@pfsense.fire.box]/root: pkg -d6 update
DBG(1)[65446]> pkg initialized
Updating pfSense-core repository catalogue...
DBG(1)[65446]> PkgRepo: verifying update for pfSense-core
DBG(1)[65446]> Pkgrepo, begin update of '/var/db/pkg/repo-pfSense-core.sqlite'
DBG(1)[65446]> Request to fetch pkg+https://pkg.pfsense.org/pfSense_v2_7_0_amd64-core/meta.conf
DBG(1)[65446]> opening libfetch fetcher
DBG(1)[65446]> Fetch > libfetch: connecting
DBG(1)[65446]> Fetch: fetching from: https://pkg00-atx.netgate.com/pfSense_v2_7_0_amd64-core/meta.conf with opts "i6"
DBG(1)[65446]> Fetch: fetcher chosen: https
DBG(1)[65446]> Request to fetch pkg+https://pkg.pfsense.org/pfSense_v2_7_0_amd64-core/packagesite.pkg
DBG(1)[65446]> opening libfetch fetcher
DBG(1)[65446]> Fetch > libfetch: connecting
DBG(1)[65446]> Fetch: fetching from: https://pkg00-atx.netgate.com/pfSense_v2_7_0_amd64-core/packagesite.pkg with opts "i6"
DBG(1)[65446]> Fetch: fetcher chosen: https
DBG(1)[65446]> Request to fetch pkg+https://pkg.pfsense.org/pfSense_v2_7_0_amd64-core/packagesite.txz
DBG(1)[65446]> opening libfetch fetcher
DBG(1)[65446]> Fetch > libfetch: connecting
DBG(1)[65446]> Fetch: fetching from: https://pkg00-atx.netgate.com/pfSense_v2_7_0_amd64-core/packagesite.txz with opts "i6"
DBG(1)[65446]> Fetch: fetcher chosen: https
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
DBG(1)[65446]> PkgRepo: verifying update for pfSense
DBG(1)[65446]> Pkgrepo, begin update of '/var/db/pkg/repo-pfSense.sqlite'
DBG(1)[65446]> Request to fetch pkg+https://pkg.pfsense.org/pfSense_v2_7_0_amd64-pfSense_v2_7_0/meta.conf
DBG(1)[65446]> opening libfetch fetcher
DBG(1)[65446]> Fetch > libfetch: connecting
DBG(1)[65446]> Fetch: fetching from: https://pkg01-atx.netgate.com/pfSense_v2_7_0_amd64-pfSense_v2_7_0/meta.conf with opts "i6"
DBG(1)[65446]> Fetch: fetcher chosen: https
DBG(1)[65446]> Request to fetch pkg+https://pkg.pfsense.org/pfSense_v2_7_0_amd64-pfSense_v2_7_0/packagesite.pkg
DBG(1)[65446]> opening libfetch fetcher
DBG(1)[65446]> Fetch > libfetch: connecting
DBG(1)[65446]> Fetch: fetching from: https://pkg01-atx.netgate.com/pfSense_v2_7_0_amd64-pfSense_v2_7_0/packagesite.pkg with opts "i6"
DBG(1)[65446]> Fetch: fetcher chosen: https
DBG(1)[65446]> Request to fetch pkg+https://pkg.pfsense.org/pfSense_v2_7_0_amd64-pfSense_v2_7_0/packagesite.txz
DBG(1)[65446]> opening libfetch fetcher
DBG(1)[65446]> Fetch > libfetch: connecting
DBG(1)[65446]> Fetch: fetching from: https://pkg01-atx.netgate.com/pfSense_v2_7_0_amd64-pfSense_v2_7_0/packagesite.txz with opts "i6"
DBG(1)[65446]> Fetch: fetcher chosen: https
pfSense repository is up to date.
All repositories are up to date.

                                          So you have some IPv6 connectivity issue at your firewall.

                                          Steve

                                          T 1 Reply Last reply Reply Quote 0
                                          • T
                                            Tom8 @stephenw10
                                            last edited by

                                            @stephenw10 But I get an IPv6 Adress and I can ping websites with IPv6.

                                            Ping from WAN to ipv6.google.com:

                                            PING6(56=40+8+8 bytes) 2axx:xxxx:xxxx::xxxx --> 2a00:1450:4016:80c::200e
                                            16 bytes from 2a00:1450:4016:80c::200e, icmp_seq=0 hlim=119 time=19.106 ms
                                            16 bytes from 2a00:1450:4016:80c::200e, icmp_seq=1 hlim=119 time=22.565 ms
                                            16 bytes from 2a00:1450:4016:80c::200e, icmp_seq=2 hlim=119 time=20.170 ms

                                            --- ipv6.l.google.com ping6 statistics ---
                                            3 packets transmitted, 3 packets received, 0.0% packet loss
                                            round-trip min/avg/max/std-dev = 19.106/20.614/22.565/1.446 ms

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post