Not booting after upgrade or clean install to CE 2.7.1
-
Do you actually need to set all three things there?
The console should already be video. Booting verbose shouldn't make any difference (but I have seen it do so before). Running efi-set could though.
-
Hello,
I just upgraded from 2.7.0 to 2.7.1 on my firewall which is not in production (DELL PowerEdge R230).
I got the same error message. I followed your information and chose option 3 and typed the command "efi-set". He didn’t find a mistake. I rebooted. It finished the update and no more problem.
If it will help.
good evening
-
@stephenw10
Hello, thanks for the response. I checked it 5 times. Actually only if I set Verbose: ON in Boot Options and run "autoboot" right after "efi-set" in boot menue 3 "Escape to loader promt" it does let the pfsense 2.7.1 booting.
Otherwise it hangs on "masks" forever.
Something is wrong with booting of 2.7.1 and I still hope somebody who knows what is done will fix it.
Right after I installed 2.7.1 on a fresh formated SSD the system gave me a message that there are "Multiple EFI boot entries" and offered to replace them with a new one.
May be there is an issue with EFI entries that the command "efi-set" resolved temporarily?
It would be great if anybody knows how to solve it constantly. -
Once it has booted try running
efibootmgr -vsee if the default efi variable is what you expect. -
Hello,
For the update, I think it is normal that at this stage to have 2 EFI input because at this point in the procedure the system has not decompressed and installed the new packages. It must create another entry for the first to be writable.
For a new installation, it is less clear for me.
By editing the EFI entries on the BIOS of your machine, is there no possibility, without deleting, temporarily inhibit one of the entries to see if it boots.
Maybe I’m on the wrong track.
Do the people who install this version on a virtual machine have the same problem? -
@stephenw10
Thanks for the advice. I ran the command and it shows the following. I do not know how to evaluate that and if there's anything wrong.
I rebooted pfsense today several times to check what does it depend on. Now it boots only in case if I set in boot options Verbose "ON". Other settings do not matter at all. When Verbose is OFF it hangs on masks again.Is there anything I can try?
-
Hmm, well you can set verbose always on:
echo 'boot_verbose="YES"' >> /boot/loader.conf.localHacky workaround but....
-
Looking for your error on the Net I found a topic on the Netgate forum with a similar error message during an update 2.4.4 to 2.4.5. ( kdb_enter+0x3b: movq)
Otherwise it seems to be a bug FreeBSD zfs/disk (Bugzilla). Je I couldn’t find a solution.
-
The panic after resetting to defaults is a known issue which is now fixed: https://reviews.freebsd.org/rGe0f3dc82727f236b0bea495d8a4d6e6dc630854d
Otherwise it's an issue with the EFI console.
-
@stephenw10 said in Not booting after upgrade or clean install to CE 2.7.1:
Hmm, well you can set verbose always on:
echo 'boot_verbose="YES"' >> /boot/loader.conf.localHacky workaround but....
Probably I did something wrong. I copied the command, tried to run it in the command prompt in Diagnostics and next time the system reboot went without a problem, but only once. Second time it required again to stop booting and set Verbose ON.
I also tried to run it in Shell but nothing worked at all.
Could you please specify where and how should I do it? -
Hmm it should work from there. Or from the command line directly.
Do you see it in /boot/loader.conf.local?
-
@stephenw10
Hello and thanks for the support.
I found that after running the command this line appears in the file as many times as I run it, but it does not change anything during the boot process.
I found the neighbour file called 'loader.conf'
and its content looks weird for me. E.g. many lines written twice, zfs_load=YES, although I have UFS file system.
May this be a bug or it's content dos not play any role? May be I should change something there to make it working? e.g. delete doubled lines and set zfs_load to NO?
Here's its full content:kern.cam.boot_delay=10000 kern.geom.label.disk_ident.enable="0" kern.geom.label.gptid.enable="0" kern.ipc.nmbclusters="1000000" kern.ipc.nmbjumbo9="524288" kern.ipc.nmbjumbop="524288" opensolaris_load="YES" zfs_load="YES" opensolaris_load="YES" zfs_load="YES" kern.cam.boot_delay=10000 kern.geom.label.disk_ident.enable="0" kern.geom.label.gptid.enable="0" kern.ipc.nmbclusters="1000000" kern.ipc.nmbjumbo9="524288" kern.ipc.nmbjumbop="524288" boot_serial="NO" autoboot_delay="3" hw.hn.vf_transparent="0" hw.hn.use_if_start="1" net.link.ifqmaxlen="128" machdep.hwpstate_pkg_ctrl="1" net.pf.states_hashsize="1048576" -
It is a bug but it doesn't do anything. You can remove those duplicate entries if you want.
Does it actually boot in verbose mode with those lines in the .local file? Or is it not possible to tell because you are still setting it at the loader prompt each time to make it boot?
-
@stephenw10
The line 'boot_verbose="YES"' in the file /boot/loader.conf.local does not play any role during boot process. Verbose in "Boot options" remains off and boot process hangs on "masks" if I do stop booting and set Verbose "ON" manually.
I deleted doubled lines. Nothing changed. What actually zfs_load="YES" mean? Coudl it be a problrem? -
It loads the ZFS kernel module. That is required if you are using the ZFS filesystem.
-
@stephenw10
thanks for the reply. as I understand there is no way to continue using of Fujitsu S940 for Pfsense.
Being not able to reboot normally sounds critical for firewall. There is a bug somewhere in the 2.7.1, because the previous version 2.7.0 works without a problem on the same hardware.
I also tried installing 2.7.1 on a new SSD, which led to the same boot failure.
If there would be an idea what I should change or correct in the installed 2.7.1 instance, please advise. -
Does it support legacy (BIOS) install rather than UEFI? That would likely boot fine.
-
@stephenw10 said in Not booting after upgrade or clean install to CE 2.7.1:
Does it support legacy (BIOS) install rather than UEFI? That would likely boot fine.
Unfortunately there is no CSM options in the BIOS. Only UEFI is available.
I would be thankful for an advice on how to troublshoot the UEFI boot.
For some reason only booting with Verbose-ON works. I do not know what does it change, but it somehow works.
I do not think it's a hardware incompatibility, because otherwise it would not boot at all.
If there is no solution and nobody can check the bug in CE 2.7.1 installation it makes no sense to continue chatting. It does not even make sense to think abou upgrading to Plus version.
Thanks for your efforts -
S SteveITS referenced this topic on
